WebGL, Unity, 3D Configurator

3D
• Add the ability to the configurator to run in 3D
• Be able to navigate in the building space and set a point where newly selected elements lock in.
• Have the option to choose the room size at the start. Or better; The room shall be expandable as needed within the limit that we have as maximum (like 10x10 meters for example, depending on how complex / time consuming the programming of a bigger room is.
• Add the option to build and view workspace from different angles. Rotate workspace horizontally 90 degrees.

Mark a compartment and have a pop-up-window:
• The option to select the entire compartment, structure or individual boards/connector and perform the following functions on them:
o Remove
o Move forward in 20 cm steps (z axis)
o Move backwards in 20 cm steps (z axis)
o Rotate along x axis (90 degree steps)
o Rotate along y axis (90 degree steps)
o Change board type
o Add accessories (side menu)
o Change colour (side menu)
o Change depth
o Change size (manual and auto defined sizes)

Structure:
• Add another mode in the configurator that allows the user to use single boards for building as well. Surrounding connectors shall automatically be added in the design.

Accessories:
• Add missing accessories to the side menu: a) wall fixing. (“Overhanging compartments” and “erased boards” are no extra buttons)
• extra shelf in 2 depths (behind a door the board is less deep). Correct depth shall be automatically generated
• Base boards - should not be bigger than 120cm. 2 height adjustments underneath each vertical board, which are missing in the calculation.
• seperate file for additional programming of accessories exists

Colours
• for both boards and connectors: Select either a) colouring of the entire furniture or b) of one single (marked) board or c) of one single front (door, sliding door and drawer) » instead of what we have right now: a) entire furniture or b) all doors or c) all sliding doors or d) all drawer fronts

Pricing:
• Option for additional Shipping costs based on the weight.
• In the few cases when the configurator may not be able to count and calculate precisely, we simply present a written text in the same frame that normally shows the price. This text is like: "Due to the complexity, the configurator cannot automatically generate the price.

Request button (right below to the price shown)
• (already in the test-version, to be linked to “info@). Automatic copy per e-mail to the person requesting + text like “We will get back to your shortly. Regards, your TAVAR team”
The user writes his name, e-mail and text into an existing form sheet. On the top of the sheet you automatically now see the design (only as a snapshot). Additionally the customer´s original design in the configurator should be stored or transferred to us, so that we can open it.

Others (partially done)
• Generate a parts list and price for the structure created with the option to export as a CSV
• The option to save the furniture design created in the user’s library
• Show the weight of the furniture created (already included and working in the test-version!)
• Improve the look and feel of the configurator
• The design would be saved as a map, the actual model would not be saved on the server