Oleksii Mamontov
Private message
Offer work
Kharkiv,
Ukraine
available for hire
Rating
Skills and abilities
Programming
-
C & C++
from 45 USD for project
- Desktop Apps
-
Embedded Systems & Microcontrollers
from 45 USD for project
Portfolio
-
24 USD USBCANFD_2 adapter with galvanic isolation for CANFD
Embedded Systems & Microcontrollers
The adapter with galvanic isolation connects the computer via USB to a standard CAN 2.0 or CAN FD bus with data rates of 2, 5, and 8 Mbps.
-
21 USD CAN FD bridge
Device for regulation, filtering, and merging traffic on the CAN bus. Can operate simultaneously with three CAN (FD) buses) 12 or 24V Power supply from 6 to 24V Additional interfaces RS422, USB, LIN
-
18 USD Manufacturing CAN modules for controlling 2 DC motors up to 24V
Embedded Systems & Microcontrollers
CAN module with opto-isolation, designed to control 2 DC motors with a supply voltage from 6 to 24V, with a current up to 3.5A each.
Also, the board allows connection of four limit switches (for closing).
Enables simultaneous control of 2 motors - rotation in different directions, rotation speed, and quick stop.
It is also possible to connect motors with limit switches to organize movement scenarios.
… All settings are done via the CAN bus.
-
18 USD CAN module for controlling 2 DC motors, inputs for
CAN module for controlling 2 DC motors, inputs for limit switches
-
40 USD Module CAN (FD), RS422, sensors IIM42652, LIS3M, BMP280.
Embedded Systems & Microcontrollers
The module is built on the STM32G431 (Cortex M4), operating via the CAN (FD) bus, integrating RS422, USART, SPI, and I2C interfaces, as well as sensors for accelerometer, gyroscope, magnetometer, and pressure. It is designed to consolidate all data and send it to the CAN bus. Power supply ranges from +6 to +30 V.
-
Flashlight control module
Embedded Systems & Microcontrollers
Flashlight control module with various functions, ultra-low consumption stm32l0
-
CAN module for DC motor control
Embedded Systems & Microcontrollers
The module is designed to control the direction of rotation and speed of the engine via the CAN bus (CANopen)..
Voltage supply from 6 to 24 volts with current up to 3 A
-
45 USD Board with 8 dimmers, CAN control
Embedded Systems & Microcontrollers
The board is designed to control the brightness of LED strips (8 pcs) and not only, the brightness is controlled via CAN.
With one frame on the bus, you can change the brightness on 8 channels simultaneously.
-
45 USD TFT module to display the info coming through the CAN band.
Embedded Systems & Microcontrollers
TFT module based on STM32 for real-time information displaying coming through the CAN band from different devices and organizing the menu for setting and managing equipment and other devices.
-
45 USD Module of terminals, thermocouples and control devices for 220 V
Embedded Systems & Microcontrollers
The module is intended for connection to the CAN bus using the SanOpen protocol, outputs data from terminals, monitoring thermocouples up to 1000 degrees, controlling actuators with pneumatic valves, contactors, etc. on 220V
If you need such or similar, contact us.))
-
23 USD Can input module with the ability to connect sensors.
Embedded Systems & Microcontrollers
Can input module with galvonic isolation, for conventional limit switches, and it is also possible to connect sensors that require power (for example, various sensors from Arduino, etc.)
-
18 USD USB_CAN adapter with isolation isolation.
Embedded Systems & Microcontrollers
An adapter for connecting a computer (minicomputer on Linux) via USB to the CAN bus for the purpose of studying and controlling actuators on this bus.
-
CAN module 8 relays for controlling 12 volt consumers.
Embedded Systems & Microcontrollers
Can module 8 relays at 12V, controlled via CANOpen DS401 protocol
-
Control of the CAN tyres - relay, pneumon valves, etc.
Embedded Systems & Microcontrollers
Control of the CAN (CanonOpen Protocol) by 12 devices (pushers, pneumoclopans, etc.)
With 220V discharge tracking at the entrance.
-
Management of Equipment
Embedded Systems & Microcontrollers
Management by Automatic
Reviews and compliments on completed projects 9
10 July 2025
320 USD
CAN-BUS filter STM32G431
The project was completed on time, this is the first, but not even the main thing, I searched for a long time for a person who would do the project on different hardware (different people promised to do everything and disappeared after trying), but Alexey offered me a more optimized option with development prospects, as it turned out he was right 100%, overall he is a person who knows exactly what he is doing, without fluff and "it won't work, I am not familiar with that". Ten out of ten stars.
|
8 March 2025
23 USD
Firmware fix consultation
The problem is solved, everything is great! Thank you, Oleksiy!
2 December 2024
79 USD
Development of a power polarity change control channel via CAN bus
Olexiy is a high-level specialist - communication, project implementation, and the technical side of the work deserve the highest praise. We received a high-level development.
We are closing this project and opening a new one. We continue the collaboration.
25 October 2024
68 USD
Improvement of the flashlight on the MK
Olexiy completed the complex project efficiently and on time. Thank you!
3 October 2024
11 USD
CanOpen Consultation
Explained every detail. Very satisfied with the collaboration.
16 July 2024
11 USD
Control of solenoid valves - consultation
Thank you for the professional consultation
16 July 2024
68 USD
Flashlight on a microcontroller
Oleksiy implemented the project extremely professionally and qualitatively! Thank you very much for the great work and I hope for further cooperation!
3 April 2024
68 USD
Configurate the data exchange between Jetson Nano and another device by can
Top specialist. I recommend for cooperation. Did everything with knowledge, did more than expected.
23 February 2024
11 USD
Consulting for Linux
Thank you for the help in setting.
Activity
| Latest proposals 10 | Budget | Added | Deadlines | Proposal | |
|---|---|---|---|---|---|
|
Stm32 + can + rs485 + hx711
45 USD
|
|||||
|
Development of a printed circuit board: STM32 + CH32V003 (RS485, CAN, HX711)
34 USD
|
|||||
|
Remote Start
|
|||||
|
Ford Escape
110 USD
|
|||||
|
LED matrix
|
|||||
|
I need a developer on Unreal Engine 5 to create a game in the genre of GTA RP.
451 USD
|
|||||
|
LED
|
|||||
|
Software for USB-C PD battery charger
100 USD
|
|||||
|
Voice control
|
|||||
|
CAN-BUS filter STM32G431
320 USD
|