Aleksey I.
Private message
Offer work
Rovno,
Ukraine
a little busy
Rating
Skills and abilities
Programming
Design & art
Portfolio
-
Jack
Scissor jack
-
Transportation videos of oversized cargo
Engineering
Example of work 3D model, working documentation
-
Hydraulic crane
Engineering
Example of 3D model execution.
-
Flour Sifter
Engineering
3D Model and working documentation
-
Installation of automotive tire recycling into fuel
Mechanical Engineering & Instrument Making
Example of completed work 3D model SolidWorks
-
3D Reducer
Architectural Design
Two-step soya reductor
-
Calculation of Generator
Architectural Design
Full Assynchronous Change Stream Generator
-
Calculation of the transformator
Engineering
Transformer calculation by Tychomirov
-
Assynchronous electrical engine
Engineering
Determination of the main sizes; calculation of voltage, electromagnetic loads, the number of stack stack; determination of the sizes of the stator and air zone; calculation of voltage, stack and rotor fair; calculation of the current that magnetizes; calculation of the parameters of the engine's working mode; calculation of losses in steel and mechanical losses; calculation of the work and launch characteristics; thermal calculation of the engine - determination of the excess temperatures.
-
Metal construction of rotating cranes
Engineering
Differential complexity drawing in SolidWorks, AutoCad, Inventor, T-Flex, 3D models and work drawing details
-
Mechanism of regulation of ionizing radiation automatic d
Engineering
Technical requirements for the device are as follows:
the dimensional length of the device L is not more than 200 mm;
the diameter of the device D is not more than 330 mm;
the diameter of the covered section d = 200 mm;
… the diaphragm in extreme positions must be fixed;
the temperature range of operation from minus 50 to plus 50 ° C;
The mechanism must ensure the workability:
• after the impact of overload, acting in the axis direction nx = ny = nz = 100g;
• under the impact of the load nx ≤ ny ≤ nz ≤ 5g, acting in any direction
Reviews and compliments on completed projects 179 1
2 June
23 USD
Drawing
30 May
45 USD
Cassette filter
29 May
23 USD
Stand
25 May
180 USD
Boiler 80 video surveillance system. Only plans, specifications, connection diagram.
20 May
451 USD
Designing a complete set of the Troika and Dismet project
the work was done professionally, on time
20 May
16 USD
Refinement of the filter
Everything is done, as always - on time, with quality!
18 May
451 USD
Project of electric lighting of the boiler 80 Gcal
The work was completed on time, professionally, and with quality.
11 May
68 USD
Develop a box for the filter
The work was done well and on time! As always!
4 May
16 USD
Finalization of the filter
The work was done qualitatively, on time, and taking into account all wishes!
2 May
45 USD
Basket
The work is done excellently! As always!
27 April
68 USD
Filter housing
The work was done on time and with quality, as always!
26 April
338 USD
Replacement of Siemens, Schneider controllers in the Toaster, Triple projects with the new Siemens Series 1500
The work was done professionally, qualitatively, and on time.
21 April
16 USD
Table drawing
everything is done qualitatively and on time, as always
21 April
23 USD
Drawing T1
everything was done on time and with quality, as always
15 April
338 USD
Transfer of the project from pdf to AutoCad or Eplan
Qualitatively, professionally, and on time. I recommend for collaboration.
13 April
68 USD
Table
Everything is done as always: qualitatively and on time!
9 April
56 USD
Drawing
Professional technical work
6 April
226 USD
Automatic heated display case
The collaboration went positively, the deadlines were met, all necessary corrections were made. We will continue to collaborate in the future.
1 April
110 USD
Creation of device v2
Everything is wonderful. This is not the first project, just like last time — the work has been done well.
31 March
23 USD
Finalization of the filter
The work was done on time, with quality! As always!
27 March
23 USD
Finishing the pallet
Everything was done quickly, on time, and with quality! As always!
25 March
45 USD
Refinement of the umbrella
Everything is done clearly, quickly, and qualitatively, according to the technical specifications!
20 March
16 USD
KZ-3
The work is done, as always - on time and with quality.
12 March
45 USD
Refinement of the belt tensioner winding 6
We collaborate almost on a permanent basis. Oleksiy is a professional person, working with him brings satisfaction.
28 February
135 USD
Project of the hood
everything is done well, qualitatively, on time
23 February
68 USD
Box for filter
Everything is done qualitatively and on time! As always - at a high level!
10 February
23 USD
Drawing of the transition
Great performer! Everything is done with quality, as always!
9 February
23 USD
Refinement of the belt tensioner winding 5
As in previous times, professionally executed work.
27 January
200 USD
Create a working design for the sampling of PM (microdust) Ea.
The work was completed at a 5+ level and even more, and the result significantly exceeded expectations. The project was logically divided into two stages, and the first stage was implemented at a very high level.
The performer did not approach the task formally but deeply understood the physics of the process, analyzed the causes of PM losses, reviewed and redesigned the probe structure, considered the impact of particle deposition, condensate, geometry, and flow regime through the SEN66 sensor. It is worth noting that a simulation was performed, which significantly goes beyond standard expectations for this stage and provided a clear understanding of the reasons for the previous almost zero indicators.
As a result of Stage 1:
- a working concept for sample collection was formed with the correct flow logic
- the correct geometry and diameters that minimize PM losses were determined
- key factors negatively affecting measurements were eliminated
- a solid foundation for tests and transition to the next stage was laid
Overall, very strong engineering work was done with a real understanding of the process, not just a formal execution of the task.
26 January
16 USD
Profile drawing
Everything is done well, on time, and taking into account the wishes!
15 January
68 USD
Development of the model and drawings of the PRR
Everything is done qualitatively and on time, taking into account all wishes!
3 January
68 USD
Regulating valve
Great job! Excellent performer!
17 December 2025
45 USD
Drawing of FKP
Done qualitatively, quickly, on time! With very useful rational recommendations from the Specialist!
11 December 2025
34 USD
Refinement of the belt tensioner winding 4
Olexiy is a specialist whom you want to turn to in case of need: he works on time, professionally, and neatly.
6 December 2025
34 USD
Refinement of the set of drawings
Everything is done, as always, excellently!
29 November 2025
79 USD
Development of the model and drawings of KKN-100-315
The work is done well, qualitatively, on time!
26 November 2025
23 USD
Project refinement of the hood 2
Everything is done well, qualitatively, on time! Taking into account all wishes!
19 November 2025
23 USD
Project for the improvement of the exhaust system
Everything is clear, fast, and on time!!!
16 November 2025
81 USD
Vandal-proof grille
Everything is done clearly, on time, and taking into account the wishes!
13 November 2025
68 USD
Project of the hood
Everything is done, as always, with quality and on time!
8 November 2025
169 USD
Develop a set of drawings for an umbrella
Everything is done, as always - at a high level!
24 October 2025
609 USD
Calculation of electromagnetic flowmeter
Everything is fine, responsible approach.
22 October 2025
60 USD
Project boat
Thank you for the work done.
I hope for further successful cooperation.
17 October 2025
68 USD
Wiring diagram for motors
We did everything very clearly and as needed.
16 October 2025
113 USD
Redesign of existing cabinet structures for contact welding.
The work was done well and on time.
27 September 2025
23 USD
Reworking of the belt tensioner winding 3
As always, the work is done with quality and professionalism. I especially recommend collaborating with Oleksiy to clients who do not have a technical education but wish to create a product or item.
22 September 2025
23 USD
Development of a set of models and drawings of the bracket
Everything is done excellently! On time, and taking into account the wishes!
18 September 2025
16 USD
From the sketch, create a drawing of the product plus detailing in DXF format.
Done on time, even earlier. All wishes taken into account. All comments considered.
16 September 2025
16 USD
From the sketch, create a drawing of the product plus detailing in DXF format.
Everything is done as agreed!!! Everything is on time and of high quality. Earlier than we agreed.
15 September 2025
34 USD
Develop a set of models and drawings for PPK2
Everything is done on time, taking into account all wishes!
13 September 2025
90 USD
Development of the model and drawings Grid #1
Everything is done at a high level! Taking into account all wishes and requirements!
11 September 2025
18 USD
From the sketch, create a drawing of the product plus detailing in DXF format.
Do everything qualitatively in very short terms, all wishes have been taken into account! .
8 September 2025
406 USD
Design of a pumping station with a heat exchanger according to ISO standards in SolidWorks
Thank you for the collaboration, the project is technically done wonderfully. No complaints. Always in touch.
Attention to the details of the project.
6 September 2025
16 USD
From the sketch, create a drawing of the product plus detailing in DXF format.
Everything was done on time!. Everything that needed to be done was done.
4 September 2025
23 USD
Development of a set of models and drawings for a crane
Everything is done excellently! Everything is according to the agreements! On time and of high quality!
2 September 2025
16 USD
From the sketch, create a drawing of the product plus detailing in DXF format.
everything on time even earlier!!
27 August 2025
34 USD
Develop a set of models and drawings
Everything is done at the highest level. Everything is according to the agreements!
26 August 2025
45 USD
Development of the model and drawings KK-01
Everything is done wonderfully! All requests during the development have been taken into account!
22 August 2025
16 USD
From the sketch, create a drawing of the product plus detailing in DXF format.
everything is private and on time all comments were taken into account!
19 August 2025
45 USD
Development of the FKK model and drawings
The work was done well and on time. Excellent job!
14 August 2025
135 USD
Development of a set of models and drawings
Everything is done at the highest level!
10 August 2025
23 USD
Create a drawing of the product from the sketch plus detailing in DXF format.
I did everything as we agreed. Everything is private. And professional.
7 August 2025
23 USD
Development of the KK-01.01 model and drawings
Everything was done on time and with quality! Taking into account all wishes!
The order was completed well.
I recommend
31 July 2025
16 USD
Development of the VR-01 model and drawings
The work is done, as always: on time, quality, taking into account all wishes!
21 July 2025
226 USD
Development of the VR model and drawings
Everything on time and of high quality, as always!
25 June 2025
180 USD
Drawing of a cat
Everything is great. The task was completed clearly and quickly
22 June 2025
100 USD
Three-wheeled brake trolley
I collaborated for a long time and was generally satisfied. Good Job!
18 June 2025
68 USD
Development of KK.01 drawings
Everything as always - at the highest level!
9 May 2025
233 USD
Shelves
Excellent specialist! The work was done qualitatively, on time, and fully met our expectations. Communication was at a high level – responded quickly to all corrections and was attentive to details. We recommend working with him!
16 March 2025
23 USD
Refinement of the belt tensioner 2
Good work. Productive collaboration.
10 February 2025
45 USD
Develop a set of drawings B9
Everything is done clearly, according to the agreements!
5 February 2025
40 USD
Additional work on the 19th pipe
As always, excellent work, everything done reasonably and with a good engineering background.
5 February 2025
110 USD
Central farm, transverse and longitudinal beams
Good Job! All done. High quality as usual.
28 January 2025
20 USD
Happy New Year!
Happy New Year! Wishing you all the best
28 January 2025
40 USD
Long beams and connecting trusses - develop connection nodes
Pretty good job, smart and cooperative
27 January 2025
23 USD
Machine for making transitions from square to round air duct
Great job done!!! As always!
22 January 2025
34 USD
Set of chairs B8
The work is done qualitatively, on time, according to the requirements and wishes!
21 January 2025
11 USD
Refinement of the belt tensioner winding device
I am reaching out to Oleksii for the second time, and my impression after the first collaboration remains unchanged: Oleksii is a true expert in his field.
17 January 2025
34 USD
Set of chairs B7
Everything is done, as always: qualitatively and on time, taking into account all requirements and wishes!
14 January 2025
45 USD
Develop a set of drawings B6
Everything is clear, as always! The work is done well, all requests have been taken into account!
7 January 2025
23 USD
Develop a set of drawings A4
everything is done qualitatively and on time, according to the agreements
2 January 2025
23 USD
Develop a set of drawings A4
The work was done clearly and on time!
28 December 2024
68 USD
Develop a set of drawings for brackets B3
Everything was done clearly and within the agreed timeframe!
21 December 2024
40 USD
Continuation of the reducer
Very good, it was a bit longer but very good.
20 December 2024
41 USD
Develop a set of drawings for brackets B2
Excellent work!
14 December 2024
45 USD
Development of a set of models and drawings of brackets
Very responsible and attentive to details Performer! The work is done clearly, qualitatively, and on time!
3 December 2024
11 USD
Drawing and model
The work was completed in full, with quality and ahead of schedule! I recommend!
30 November 2024
113 USD
Product for winding the tension strap
I had an interesting experience working with Oleksiy. He turned out to be a goal-oriented person with a professional approach to the job. Oleksiy was able to find the right technical solution that not only simplifies the manufacturing of the product but also significantly reduces its cost. At the end of the work, I received a complete package of neatly made drawings necessary for production.
I recommend collaborating with him to other clients, and I wish Oleksiy inspiration in future projects.
18 November 2024
80 USD
Short spindle with flange
Really good Job! I am happy
12 November 2024
11 USD
Drawing
Satisfied with the cooperation! Everything was according to the agreements.
8 November 2024
140 USD
Creation of the device
Oleksiy demonstrated a high level of professionalism and responsibility. He quickly and efficiently completed the assigned task, was always in touch, which allowed for prompt discussions of details and receiving feedback. His ability to propose solutions and make necessary adjustments in a short time greatly helped to successfully and timely complete the project.
Oleksiy proved to be a performer who understands the client's needs and can adapt to new requirements. I recommend him as a reliable and competent specialist, with whom it is pleasant and effective to work.
29 October 2024
233 USD
Preparation of a drawing for the production of a 3D model
The work was done well.
28 October 2024
451 USD
Development of a dough mixer with a volume of 350 liters.
Perfectly done work!
16 October 2024
35 USD
Checking simple structures 3
Good job. I was very happy
10 October 2024
25 USD
Beam with holes 05-10
Good Job. I was happy for the cooperation.
7 October 2024
116 USD
3-D model of the grill in Solidworks
Wonderful specialist! The work was done qualitatively, on time, and taking into account all wishes. Constant communication. Satisfied with the result, I recommend for collaboration!
6 October 2024
60 USD
Iron farm with holes and semi-ellipse 2
Good Job! Very cooperative work!
28 September 2024
35 USD
Second stage. Structure 1 and 2
Good Job. Nice and effective cooperation
22 September 2024
130 USD
Models by list
Good Job. Friendly and cooperative.
11 September 2024
116 USD
Development of a production line project for stamping and folding sheet metal
Alexey is a very pleasant person to communicate with.
We are working together for the first time, and I am looking forward to future projects with great optimism.
Alexey has a lot of expert knowledge and expertise.
He is not afraid to use unconventional ideas.
Thank you for the pleasant collaboration!
4 September 2024
60 USD
Beam with holes, curved beam, etc.
Satisfied. Good job. We will continue the collaboration.
2 September 2024
564 USD
Set of drawings (3D assembly + drawings according to ESKD) for a flour sifter
The work has been completed. There are some comments regarding the design of the drawings and deadlines, but nothing critical. Thank you for the work.
13 August 2024
20 USD
Truss beam
Smart and skilled. Good communication. Good job.
6 August 2024
451 USD
Set of chairs (3D assembly + drawings according to ESKD) for a log splitter
Olexiy, thank you for your work!
19 July 2024
20 USD
Calculation of the farm
I am very happy with cooperation with Alex. Very smart and friendly.
19 July 2024
519 USD
Electromagnetic control valve fuel consumption
Average level of skills. Do not assign complex tasks. Quite approachable, reacts adequately to feedback on the work done, makes corrections if necessary.
|
17 July 2024
291 USD
Calculation of the amount of iron in a reinforced concrete structure
Work completed, everything is excellent
14 July 2024
113 USD
3D model of a train switch arrow
Everything was within the norm, the task was completed
14 July 2024
20 USD
4 simple structures
Really Good Job. I am satisfied
7 July 2024
90 USD
Calculation of heterogeneous plates
Good job, let's continue working together.
27 June 2024
56 USD
Calculation of technical equipment characteristics
On time and high-quality elaboration of details.
24 June 2024
23 USD
Dynamic characteristics of the car
The work was done on time and with quality
21 June 2024
113 USD
Calculation of the winding of the electric motor
Communication went well.
16 June 2024
40 USD
Compression fiberglass work
Excellent work, repeat order
8 June 2024
338 USD
Calculation of VAT
The work is done qualitatively and on time
7 June 2024
20 USD
Fiberglass for twisting
Good job, excellent cooperation
4 June 2024
25 USD
Work on fiberglass twisting
Great job! 100% satisfied again.
3 June 2024
68 USD
Illustration of the instruction
The work was done with a delay. In my opinion, everything could have been done on time and in full with better communication.
27 May 2024
113 USD
Coursework (CP transmission)
Work done perfectly
27 May 2024
50 USD
Belt drive
Excellent work, not the first time. I recommend
24 May 2024
68 USD
Individual work
All is well, done on time and well
20 May 2024
56 USD
"Technological design of ATP and STO and car service"
Work well, the main thing is to meet the deadlines!
18 May 2024
135 USD
Experimental internal combustion engine setup
All is well,
I would like more initiative and options
but maybe those are just my whims)))
We will continue working.
13 May 2024
50 USD
Calculate cross-sections of H-section in SolidWorks
The work is done excellently, the result we were counting on. Good communication and flawlessness. Good Job!
5 April 2024
56 USD
Projects of ATP
The work was done on time and with quality
22 February 2024
23 USD
Description of the technical part of the product
The eye was pleased, addressed for the second time, everything was done in time and quality! One word, the man is the master of his business. I will contact you again!
2 February 2024
113 USD
Mechanism of reverse resistance
Excellent work done!!! Fast and in time! I will contact you again!
20 January 2024
175 USD
Create a collection project from already available components
I can recommend Alexey to others as an executive: the person is technically skilled, he understood my task and performed it. The task was to complete the assembly details and draw the capture for the container. Everything was done in time. I recommend !
28 December 2023
56 USD
Mechanical calculations 2
I recommend cooperation, professionally, quality
15 December 2023
34 USD
Mechanical Understanding
On communication, professionally, many times collaborated together
13 December 2023
113 USD
Strength Strength Equipment
Дякую за співпрацю.Все зроблено я треба.
9 December 2023
113 USD
Mechanisms of Automation
Everything is done as agreed! We must continue our cooperation! Thank you !
4 December 2023
56 USD
Mechanical reasoning
I recommend that you work, it’s not the first time.
29 November 2023
56 USD
Heat roofs
Not first, I recommend.
13 October 2023
23 USD
Intellectual mechanotronic systems
Work is done, but with delay.
10 August 2023
113 USD
Developing a lock system for electromechanical lock
The work is done properly and timely.
Everything is done as agreed.
Even when the course of the work we installed additional specifications, the execution took everything in mind and integrated it into the project.
3 August 2023
28 USD
Calculate the armament and thickness of the concrete wall
The results are presented very clearly, clearly and conveniently!
1 July 2023
27 USD
by TMM
Always in contact, listening to the request of the customer, I recommend
16 June 2023
248 USD
ASU TP Diploma
Long and hard. But succeeded
2 June 2023
11 USD
Drawing Technology of Working Drawing
Thank you Alex for the good work. Very pleased with our cooperation.
28 May 2023
158 USD
Diploma based on a course project
Everything is wonderfully done. Thanks to Alexis.
22 May 2023
11 USD
TCM 1 List
I recommend collaboration, not the first time.
13 May 2023
45 USD
Car engines
It responds quickly, everything is done in time.
7 May 2023
45 USD
The course of diesel
Thank you for the wonderful work. Good writer, I’m going to talk to you.
Thank you for the work! As always at the highest level.
1 May 2023
45 USD
TCM is 25
I recommend work, quality work.
29 April 2023
23 USD
Correction and creation of new currents to the coursework
Everything is fine as usual. The practitioner responds to the observations and corrects the inaccuracies that have been made. Very pleased with cooperation.
20 April 2023
45 USD
The course work. Mechanics of Harch Manufacturing
Alexis, thank you for your work! They were always on the link, taking into account all the demands and desires. The work is pleased! Quality at 100%
16 April 2023
45 USD
by TMM
Recommendation for quality work.
3 April 2023
43 USD
Course work
Thank you for the wonderful work. We continue to work!
14 March 2023
45 USD
Curriculum on the subject of TAU
Very patiently. Despite all the nuances on my side, everything was done and continues the dialogue.
6 March 2023
45 USD
Course Project
I’m going to go to Alexis not the first time and I’m very pleased with his work.
28 February 2023
23 USD
Painting a 3D frame model of the machine
The project was completed in time and very pleased with the result. I recommend cooperation.
12 January 2023
23 USD
Subject: Design of the loading subcut (calculation + CAD)
Thank you for the good job, it’s all great.
29 December 2022
27 USD
Laboratory Works - Automated Design Technology
Everything was done well, a little didn't put into the deedline, but so everything was fine.
16 December 2022
25 USD
Mechanism of horizontal navigation of the aircraft
The work is done well! All the directions were made! Thank you !
11 December 2022
45 USD
by TMM
Not the first time, very professional.
9 December 2022
45 USD
Machinery Technology
is done. As always quality.
Thank you for work
9 December 2022
25 USD
of course. Mechanism of horizontal...
Thanks to the author for the good work.
8 December 2022
39 USD
Theory of Machines and Mechanisms
The project was done quality, in great scale, all great, thank you!
30 November 2022
39 USD
TMM Course
I recommend professionally, in time.
27 November 2022
39 USD
TMM Cursacks
Very professional, always in contact, I recommend
1 November 2022
41 USD
The worm - 3
Order is fulfilled. Everything at the highest level with explanations. Thank you very much.
1 November 2022
45 USD
Reducer Reducer
The project was completed in a short time. Thank you very much
9 October 2022
23 USD
Cost calculation - practical rear
Thank you very much, everything is great!
13 September 2022
18 USD
Mathematics and the creation of the Geogebra file.
Thank you very much for the work! Clearly and according to the plan
5 September 2022
56 USD
AutoCAD electrical
The result is satisfied, everything is done correctly.
15 July 2022
45 USD
Courses by Tae
The quality of work is satisfied
25 June 2022
34 USD
A car project using parts of the machine
I recommend it! The work was done well.
24 June 2022
226 USD
Diplomacy Work
A very responsible specialist, who knows how to do his job, all the problems solved in the shortest time.
A little failed on the deadlines, but it was not critical. Reply quickly, no claims. I recommend cooperation!
2 June 2022
45 USD
Massive and transporous equipment.
All done in time thanks for work.
27 May 2022
7 USD
Drawings and calculations
Thank you very much to Alex for completing the next project. A reliable man. The professors!
10 May 2022
20 USD
Гидравлический подъемник
Thank you very much to Alex for the project. Always in contact. I hope we will work again)
2 May 2022
45 USD
Course project in the production technology of LA
The project was performed qualityly! A great performer!
11 April 2022
17 USD
Automation of technological processes and production
Good, the result of cooperation is happy.
9 April 2022
11 USD
Розділ 1 по прикладу(ТММ)
The project is done in a short time. Thank you for cooperation!
7 April 2022
11 USD
Курсова частина ТММ
The project is performed in fast-track, quality with all calculations. Thank you for work
30 March 2022
45 USD
Course Architecture
The project was completed in full volume with all the drawings, quickly. Thank you for cooperation!
22 March 2022
34 USD
Theory of Automatic Control
Good, the result of cooperation is happy.
Activity
| Projects underway 2 | Budget | Added | Deadlines | Proposal | |
|---|---|---|---|---|---|
|
Stand
135 USD
|
|||||
|
Working documentation for cast transformers (tolu, znolp, etc.)
226 USD
|
| Latest proposals 10 | Budget | Added | Deadlines | Proposal | |
|---|---|---|---|---|---|
|
Stand
135 USD
|
|||||
|
Cassette filter
45 USD
|
|||||
|
Drawing
23 USD
|
|||||
|
Working documentation for cast transformers (tolu, znolp, etc.)
226 USD
|
|||||
|
Boiler 80 video surveillance system. Only plans, specifications, connection diagram.
180 USD
|
|||||
|
A working project is required for the volume of the flywheel on the frame.
451 USD
|
|||||
|
A 3D model needs to be created.
45 USD
|
|||||
|
Metal Structures Estimator / Estimator (remote)
1398 USD
|
|||||
|
Stand
23 USD
|
|||||
|
Refinement of the filter
16 USD
|