Volodymyr Prynda
Offer Volodymyr work on your next project.
Private message 
Lvov,
Ukraine
8 hours 37 minutes back
a little busy
2 Safes completed
13 days 2 hours back
1 client
2 proposals made
on the service 10 years
Rating
Successful projects
Average rating
Language proficiency level
Українська: fluent
Русский: advanced
Polski: upper-intermediate
English: elementary
Skills and abilities
Design & art
-
3D Modeling
from 6 USD for hour
Architecture
-
Drawings & Diagrams
from 6 USD for hour
-
Engineering
from 6 USD for hour
-
Object Design
from 6 USD for hour
Portfolio
-
Roboted area
Object Design
In the manufacturing section is performed the receipt of the body of electrical cheaper from the machine
for leaving under pressure with 6-axis work and submitting them to the process of tampon printing.
The complex includes three printing devices and a crown device, i.e. preparation.
Surface to the second. The robot removes the body of the electrical machine from the machine for lithium under pressure.
… consistently submit to the preparation position of the surface and up to three tampon machines.
The boring and monotonous work of five operators is replaced by one work.
A significant improvement in the efficiency of production.
-
Roboted area
Object Design
In the manufacturing section is performed the receipt of the body of electrical cheaper from the machine
for leaving under pressure with 6-axis work and submitting them to the process of tampon printing.
The complex includes three printing devices and a crown device, i.e. preparation.
Surface to the second. The robot removes the body of the electrical machine from the machine for lithium under pressure.
… consistently submit to the preparation position of the surface and up to three tampon machines.
The boring and monotonous work of five operators is replaced by one work.
A significant improvement in the efficiency of production.
-
Roboted area
Object Design
In the manufacturing section is performed the receipt of the body of electrical cheaper from the machine
for leaving under pressure with 6-axis work and submitting them to the process of tampon printing.
The complex includes three printing devices and a crown device, i.e. preparation.
Surface to the second. The robot removes the body of the electrical machine from the machine for lithium under pressure.
… consistently submit to the preparation position of the surface and up to three tampon machines.
The boring and monotonous work of five operators is replaced by one work.
A significant improvement in the efficiency of production.
-
Roboted area
Object Design
In the manufacturing section is performed the receipt of the body of electrical cheaper from the machine
for leaving under pressure with 6-axis work and submitting them to the process of tampon printing.
The complex includes three printing devices and a crown device, i.e. preparation.
Surface to the second. The robot removes the body of the electrical machine from the machine for lithium under pressure.
… consistently submit to the preparation position of the surface and up to three tampon machines.
The boring and monotonous work of five operators is replaced by one work.
A significant improvement in the efficiency of production.
-
Roboted area
Object Design
In the manufacturing section is performed the receipt of the body of electrical cheaper from the machine
for leaving under pressure with 6-axis work and submitting them to the process of tampon printing.
The complex includes three printing devices and a crown device, i.e. preparation.
Surface to the second. The robot removes the body of the electrical machine from the machine for lithium under pressure.
… consistently submit to the preparation position of the surface and up to three tampon machines.
The boring and monotonous work of five operators is replaced by one work.
A significant improvement in the efficiency of production.
-
The doser
Object Design
Dozator of powder-like materials
-
The cylindrical gateway
Technical Documentation
Glover is a charging device (glover) of cyclic action intended for the equal input of spinning materials directly into the pipeline.
The gate wire supplies a smooth solid material to the pipeline in separate portions. Equal power is achieved by combining several (usually three) separate devices in one aggregate.
Thanks to the possibility of better hermetization of cameras, cyclic action transmitters develop higher stresses and can carry out transportation to a greater distance than continuous action devices.
-
Ancient entrance conic
Technical Documentation
The gate wire provides a smooth solid material with separate portions. Productivity is determined by the volume of the work camera and the speed of rotation.
It has a steel welding body and a rotor that has a washing resistance. It is resistant to mechanical, dynamic and shock loads.
The internal work surface and the spots of the rotor of the conic form. With natural washing, you can easily and quickly eliminate the fittings between the spots and the body in the work area.
-
Transportation chain carrier
Technical Documentation
The area of transported raw materials is filled with water to avoid the pollution of the production area.
-
Camera of Powder Painting
Technical Documentation
The powder painting camera can provide both manual painting and automatic painting. The camera can be one- or two-sided. Transitional or stupid. It can be deployed separately and in the composition of an automatic paint line. All options are developed.
-
Magnetic Blocks Cleaning
Technical Documentation
Obert block of magnets. It is used in the water mixture cleaning system.
-
Press of Sandwich Panel
Technical Documentation
The line is pneumatic.
-
Norya Stretchova - Vertical Transporter
Technical Documentation
-
Converter Stretch
Technical Documentation
-
The cylindrical gateway
Drawings & Diagrams
Glover is a charging device (glover) of cyclic action intended for the equal input of spinning materials directly into the pipeline.
The gate wire supplies a smooth solid material to the pipeline in separate portions. Equal power is achieved by combining several (usually three) separate devices in one aggregate.
Thanks to the possibility of better hermetization of cameras, cyclic action transmitters develop higher stresses and can carry out transportation to a greater distance than continuous action devices.
Reviews and compliments on completed projects 2
22 May
16 USD
Drawings based on sketches
Quality
Professionalism
Cost
Contactability
Deadlines
Everything was done clearly and on time at a good engineering level.
Petro Nepyivoda
| Personal | Response review
21 May
16 USD
Drawings based on sketches
Quality
Professionalism
Cost
Contactability
Deadlines
Execution of the order at the highest level
Petro Nepyivoda
| Personal | Response review
Activity
| Latest proposals 10 | Budget | Added | Deadlines | Proposal | |
|---|---|---|---|---|---|
|
Make a dxf for the plates
16 USD
|
|||||
Drawings based on sketches
16 USD
|
|||||
|
Drawings based on sketches
16 USD
|
|||||
|
Body
29 USD
|
|||||
|
Design of a non-automatic powder coating workshop + equipment drawings
609 USD
|
|||||
|
SolidWorks Engineer — simulation of the vibrations of the FPV drone frame (volunteer project)
23 USD
|
|||||
|
Development of a mechanism in SOLIDWORKS.
1129 USD
|
|||||
|
Vacancy: Design Engineer (SolidWorks, remote)
23 USD
|
|||||
|
We are looking for a person who knows how to work in Solidworks
11 USD
|
|||||
|
Cutting of the bunker doser for splashing materials
1129 USD
|
