C/CPP stm32 prototyping avr PCB python pascal esp8266 esp32 delphi telegram bot
Serhii V.

Serhii V.

Ukraine

Embedded Systems & Microcontrollers

0 0
137
Go to profile
PLC
11 USD
139
PLC
Embedded Systems & Microcontrollers
1. monitor PC parameters 2. online weather 3. psychrometer 4. made to order
Kostiantyn Chernyshov

Kostiantyn Chernyshov

Ukraine

Embedded Systems & Microcontrollers · Interface Design (UI/UX)

2 2
122
Go to profile
Two-controller STM32 + STM8 control module
264
Two-controller STM32 + STM8 control module
Embedded Systems & Microcontrollers
Completed two-controller STM32 + STM8 (SOP20) control module designed for receiving commands and sending status (information, temperature) to the central control console. The actuator device is a bistable relay. The second controller (STM8) is a…
Payment for the executive device according to the RS-485 Modbus protocol
217
Payment for the executive device according to the RS-485 Modbus protocol
Embedded Systems & Microcontrollers
Prototype STM32 (SOP20) control module designed for receiving commands and sending status (information, temperature) to the central control console. A DC-DC converter up to 40 volts is used for power supply, with an RJ-45 connector, and the Modbus…
6-channel relay control board
261
6-channel relay control board
Embedded Systems & Microcontrollers
Implemented using shift registers, meaning it can scale up to 64 relay channels. The board for placing the controller is universal-modular, designed for 20 contacts, for soldering STM32 (LQFP32). Connectors, fuses for each channel, and a pulse DC-DC…
Wiring for SOP-20 package (STM8/STM32)
207
Wiring for SOP-20 package (STM8/STM32)
Embedded Systems & Microcontrollers
Soldering adapter for SOP-20 package. The printed circuit board has a solder mask applied. Tinning is possible both chemically (cold) and with various types of low- and high-temperature solders (and solder pastes of the BGA type). In the photo -…
STM32 control board
249
STM32 control board
Embedded Systems & Microcontrollers
On the right - the board on STM32 (SSOP-20). On the left - similar functionality on ATTINY13 (DIP-8). The test board is a worn-out, soldered-resoldered 10 times sample, on which characteristics, logic, load, etc. are tested. The final version is…