Arduino

C & C++ — incorrectly specified categories?

22 USD

Project translated automatically. Log in or register, to view the original Good day . You need to write the code for Arduino. I have 5 Arduino nano to which the NRF24L01+ radio modules are connected. Four of them are transmitters, and one receiver. Transmitters transmit the invertered state of the D4 pin, and the receiver extract the signal received from the transmitters and extract it to the D5 pin by the following algorithm: if one transmitter transmits a high level, then the receiver extract a high level to the D5, if all transmitters transmits a low level, then the receiver extract a low level to the D5 pin. Also, if the transmitter does not come out to the connection, the receiver assigns such a transmitter as a low level, until the moment of the connection is restored. Also use the hardware stretch for the D4 pin. The numbers of the pins are not principle (signals that will come and come from the pins are logical 0 and 5 in. The radio module is set to CE - D7, CSN - D8, MOSI - D11, MISO - D12, SCK - D13.

Proposals 2

Igor B.

84 3

Budget: 1000 UAH Deadline: 1 day

Good morning, I can do, there is a great experience working with Arduino

Aleksandr A.

51 0

Budget: 1000 UAH Deadline: 3 days

Good day .
I can do it in 2-3 days.
---------------

Vladislav Raievsky
Hotin, Ukraine

Projects -
Rating -
Rating 155