Controller of power management

Drawings & Diagrams, Engineering — incorrectly specified categories?

335 USD

Project translated automatically. Log in or register, to view the original You need to develop the hardware and software part of this controller: 1 .There are two external power sources 12v dc and 220v AS.220v is converted to 12v on the power block when one of the two working modes are included.There is also an internal source of ACB 12v (4x3,2v 7A lifepo4), which is a buffer source of power system and controller.The 2ndThe controller must provide the operation of the system that is powered from DC 12v in two modes and is disabled: - forced (including 1) - power to the breakdown of the ACB (bms), while if there is one of the two sources of external power then the breakdown will not occur, therefore constant work.- automatic (including 2) - permanent power, and in the event of the disappearance of one of the external power sources - another X minute power (to be charged with jumpers 5-10-15-30-45 minutes), then 3 seconds and disconnect.When the source disappears, it takes 1 second to warn.The disconnected mode allows only to charge the acb, without the output of energy.3 .Priority, with the presence of 12v dc and 220v AS is 220v.and 4.Indications on the plate (smd led) The presence of food by type Inclusion by Types Mode of 1/2 The charge - on (from the tension on the system) and 5.Self-test - indication of all LEDs, power 12v 5s, power 220v 5s, external power disconnection and 10 seconds of work from the acb, zoomer and disconnection, return to normal mode.The system can operate in the DC 12-28V range. The consumer is 80-140 watts. Dc - the vehicle network As - 220v 50Hz, then convert through meanwell to 14 volt for the battery charging and power system Further development of the project: Monitoring and control from application via bluetooth, with the possibility of disconnecting bluetooth by physical button The task: Create and dissolve the pay. Create a microprogram. Preparing a prototype

Proposals 2 Discussions 1

Igor Dobryansky

4 1

Projects 4
Rating -
Rating 187

Budget: 25000 UAH Deadline: 20 days

Welcome to!
I propose to make a project on one controller "Malinci"
It has more possibilities to perform and complex processes resolve, has its own blitz, you can connect the display simplifies many tasks.
I have a personal project. I recommend it.

The list does not show proposals concealed by the client or freelancer with a Plus profile, as well as proposals violating rules

Current freelance projects in the category Drawings & Diagrams

Technical assignment for the design of electrical supply for a residential building

Engineering 0 proposals 23:24

Not specified
Development of assembly diagrams for furniture

8 proposals 16:49

603 USD
Site layout plan scheme

Infographics 8 proposals 11:28

Not specified
Technical project drawings for apartment renovation.

Interior Design 33 proposals 4 August

Not specified
Minimum technical project for apartment renovation

Interior Design 30 proposals 4 August

Not specified

Dmitro Stetsenko
Kyiv, Ukraine

Projects -
Rating -
Rating 45

Igor Dobryansky

Proposals are currently absent

Current freelance projects in the category Drawings & Diagrams

Technical assignment for the design of electrical supply for a residential building

Development of assembly diagrams for furniture

Site layout plan scheme

Technical project drawings for apartment renovation.

Minimum technical project for apartment renovation