C++ commands for ESP32

Budget: 60 EUR Deadline: 3 days

Hello! I have significant experience working with ESP32 microcontrollers and writing stable code in C++ for automation. I have implemented similar projects using servos and various sensors (temperature, gas, humidity).
What I offer for your project:
Safety logic: I will set up instant servo activation to close the valve when critical readings from the gas or temperature sensor are reached.
Stability: I will write optimized code without blocking delays (delay) so that the system continuously monitors the state of the sensors in real time.
Flexibility: I will add the ability to calibrate the activation thresholds to your needs.
I am ready to quickly prepare the working functionality. I look forward to collaborating!

Budget: 100 EUR Deadline: 1 day

Good day.
We have experience in developing firmware for ESP32 (C/C++), working with sensors (gas, temperature), servos, and automation logic. We can prepare stable functionality for your device, taking into account safety and proper handling of emergency situations.
We are ready to discuss technical details (connection diagram, operating algorithm, protection requirements) and start implementation.

Budget: 100 EUR Deadline: 10 days

Good day. I will complete your project. To clarify the deadlines, please write in the personal account. I have experience working with ESP32. I carry out projects of any complexity on this module. I can also create a schematic, a printed circuit board for production in China, and a case for 3D printing. Thank you for your attention.

Budget: 80 EUR Deadline: 3 days

I can do this task. Do you have a DS temperature sensor or some other one? You can write to discuss the details.

Budget: 175 EUR Deadline: 20 days

Good day Jov, I have reviewed your task and am ready to start working. I have experience with ESP32 and completed projects with STM32. It will not be difficult to acquire a sensor and a servo.

Budget: 75 EUR Deadline: 5 days

Good day, I am ready to complete your task, I just need to clarify which models of sensors and servos you are using.

Budget: 1000 EUR Deadline: 7 days

Hi,
I am can make perfect C++ commands for ESP32.
Let's connect.
Best,
Jeo

Budget: 25 EUR Deadline: 1 day

Good day, I can help with the implementation of firmware for ESP32, write to me.

Budget: 100 EUR Deadline: 4 days

I have practical experience in software development in C++ for ESP32 microcontrollers and automation systems. I am ready to implement the software part of the automatic gas valve considering safety requirements and stable operation of the device.

I can prepare structured C++ code for ESP32 with support for a servo motor to control the valve, a gas sensor, and a temperature sensor. I will implement continuous monitoring of parameters, state logic (normal / warning / emergency), emergency gas shutoff when thresholds are exceeded, protection against hanging, and correct operation without blocking delays. The code will be suitable for further expansion and testing on real equipment.

I work with a clear architecture, separate modules for sensors, valve control, and safety logic. If necessary, I can add the ability to configure thresholds, event logging, support for Wi-Fi, or a web interface.

Budget: 25 EUR Deadline: 1 day

Good day, I am interested in your project. I will do everything quickly and efficiently.