Program for controlling two hydraulic pumps
1113 USD 
It is necessary to write a program in CODESYS for the IFM controller
CR710S.
The program receives information from the proportional joystick and transmits a signal to the proportional hydraulic valves
of the hydraulic pumps, controlling their operation based on the sensors of the rotation frequency of the hydraulic motors.
-
5 days1113 USD
238 5 days1113 USD
Dear Viktor,
I am ready to take on the development of the program for the IFM CR710S controller, which will ensure the control of two hydraulic pumps according to your requirements.
Project Tasks
The program must perform the following functions:
1. Signal processing from the proportional joystick:
• Receive data on the direction and amplitude of joystick deviation.
… 2. Control of proportional hydraulic valves:
• Generate signals to control the hydraulic pump valves depending on the joystick position.
3. Monitoring and adjusting the operation of the hydraulic pumps:
• Control the rotation frequency of the hydraulic motors using appropriate sensors.
• Perform feedback for real-time adjustment of pump operation.
Tools and Technologies
• Development will be carried out in the CODESYS environment using programming standards for PLCs.
• Internal functions and libraries of the IFM CR710S controller will be used.
Execution Stages
1. Analysis of the technical task: clarification of project details.
2. Program development: creation of the pump control algorithm.
3. Testing on the simulator: checking functionality in a virtual environment.
4. Integration and setup: implementation of the program on the equipment.
5. Final testing: verification of the correct operation of the system with real sensors and valves.
We guarantee the completion of the project within the agreed deadlines while adhering to high-quality standards. If necessary, we can provide technical support and program upgrades.
Sincerely,
Nikita Golovin
-
Добрый день.
Входные и выходные сигналы джойстика, клапанов и датчиков числа оборотов? -
Current freelance projects in the category Mechanical Engineering & Instrument Making
Technical specifications, drawings for the manufacture of NPK
557 USD
Develop a 3D model and a set of drawings for a wheeled type NRK weighing approximately 200 kg. There is a concept and basic dimensions. It is necessary to prepare documentation for the manufacture of metal structures. Drawings & Diagrams, Mechanical Engineering & Instrument Making ∙ 9 days 14 hours back ∙ 8 proposals |
We are looking for a specialist for the development of greenhouse models.
22 USD
Need a designer-drafter for developing greenhouse models We are looking for a specialist for long-term cooperation in developing new models of garden greenhouses and preparing complete production documentation. We will provide the main parameters of the future structure:… Mechanical Engineering & Instrument Making, Drawings & Diagrams ∙ 9 days 17 hours back ∙ 10 proposals |
Kharkiv