Technical Drawing
1. GENERAL INFORMATION AND PURPOSE
Product type: Large demonstration aquarium of frame type.
Frame made of 100x100 profile, 80x80 angle
2. GEOMETRIC AND WEIGHT PARAMETERS
External dimensions of the structure (L×W×H): 3250 × 1800 × 1300mm.
Height of water column (maximum): To be structurally accepted as 1100 mm (taking into account technological underfilling).
Configuration: Rectangular basin with a 360° view (all 4 vertical sides — transparent glazing).
3. TECHNICAL REQUIREMENTS FOR CONSTRUCTIVE ELEMENTS
3.1. Metal Frame (Structure)
Type of structure: Spatial welded frame made of steel profile with a solid perimeter for fixing each glass. Each of the 4 glasses is a separate panel glued into the quarter (groove) of the metal frame on all 4 sides.
3.3. Bottom of the Aquarium and Transport Nodes
Base construction: Rigid frame base of the metal structure, covered with moisture-resistant sheet material.
Bottom waterproofing: Finish coating with specialized PVC membrane ("pool foil").
Clearance for forklift (ground clearance): The lower belt of the frame must have a structural clearance from the floor of at least 100–120 mm for unobstructed entry of forks.
Forklift pockets: Design through guide pockets (slots) in the structure of the pallet for standard dimensions of heavy forklift forks. The pockets must pass through the entire frame for the possibility of lifting the product from either of the two long sides.
