The Heater Control Module

Embedded Systems & Microcontrollers — incorrectly specified categories?

2 USD

Client's review of cooperation with Oleksandr Mymrikov

The Heater Control Module

2 USD

I’m working with Alexander for the second time and I’m going to talk to him in the future. Everything in the best way. help with the accurate formulation of the TZ, performed all the work in time and the result fully justified expectations - the performance of the received device strictly meets our requirements.
I recommend

5.0

Olga Olga

Reciprocal Feedback

3 December 2019

Freelancer's review of cooperation with Olga Olga

The Heater Control Module

2 USD

The customer is coming out quickly. The inspection of the work is also done quickly.
Requirements formulated properly
In general, everything is ok.

5.0

Oleksandr Mymrikov

Reciprocal Feedback

3 December 2019

Project translated automatically. Log in or register, to view the original It is necessary to develop a control module for two heaters and one boiling engine to provide the appropriate temperature in the hot food storage room.Heater AC 220 V 2A (2 pieces) DC 24V 2A ventilator engine (1 piece) It is necessary to implement a system (PROTOTYP) that allows to regulate power (fuel voltage) for all consumers; having a reverse connection by temperature (the simplest thermopar); working to maintain temperature with accuracy of + - 1 degrees; having input-output means (a bright screen showing two temperatures - a set/measured, buttons/encoder); connection to the network and the possibility of remote monitoring/management (the data point is not obligatory to be implemented at the current stage, it is also necessary to provide the possibility of adding this moment with simple actions (e.g. the add-on of the radio module and the change of the message) without the transfer of all devices); The prototype plate should be made in one layer, having the thickness of the conductors sufficient, for its independent manufacture in household conditions, as well as the non-specialist body components (so that our person could make it independently and quickly if necessary) .After testing on the object (during a month-two) and the final approval of the functional project will receive the continuation - the adjustment of all the moments, the transfer of the fee to the required dimensions and the preparation of the documentation for the order of the production of a set of devices on production.

Proposals 2 Discussions 1

Oleksandr Mymrikov

Winning proposal

18 1

Projects 18
Rating -
Rating 918

Budget: 100 UAH Deadline: 7 days

We make the payment and the website/application, as always, everything in the best way.

The list does not show proposals concealed by the client or freelancer with a Plus profile, as well as proposals violating rules

Current freelance projects in the category Embedded Systems & Microcontrollers

Small rotary wire camera

4 proposals 29 July

112 USD
Development and refinement of PCB based on the existing layout

Mechanical Engineering & Instrument Making 4 proposals 28 July

Not specified
Development of a flight controller for fixed-wing UAVs

5 proposals 22 July

Not specified

Olga Olga
Dnepr, Ukraine

Projects 2
Rating -
Rating 71

Olga Olga

Oleksandr Mymrikov

Oleksandr Mymrikov

Proposals are currently absent

Current freelance projects in the category Embedded Systems & Microcontrollers

Small rotary wire camera

Development and refinement of PCB based on the existing layout

Development of a flight controller for fixed-wing UAVs