- Projects 7
- Rating -
- Rating 600
Budget: 17500 UAH Deadline: 10 days
Two
Hi, Vladislav
The model and requirements are known.
I turn the site under all devices and browsers, using all the modern technologies. Your site will be in the green zone of Google Page Speed, I will also push on WordPress
I work until full approval, I put the directions even after submission of the project. I can also accompany the project in the future, introduce any directions and improvements on contractual terms.
Write and discuss details.
Examples of my work on WordPress:
HTTPS://vitalijkoch.de/
HTTPS://folkaflokkurin.buro.fo
HTTPS://yourcbdwhitelabel.eu
https://moiobrii.com.ua/
Budget: 7000 UAH Deadline: 6 days
Vladislav to greet. I looked at your model. I can make a slurry. I work in Galp. I write a clear, clear code. I'm hard to guide you in terms of cost and deadlines, I would like to talk to you about some details. Discuss functionality and ask some questions.
Let’s talk about the project personally. I will be happy to cooperate.
- Projects -
- Rating -
- Rating 204
Budget: 11990 UAH Deadline: 7 days
Two
Hello Vladislav, my name is Evgeny, I’m engaged in web development for more than 7 years and I have a great experience in implementing similar projects.
I was very interested in your proposal. I make for you an adaptive, valid and cross-browser edge that will be perfectly displayed on any device, in all modern browsers, as prescribed in the TZ. The images will be interchangeable and displayed adequately, not depending on permissions and proportions. Bootstrap without using Bootstrap, only a clean and reliable code. The entire structure of the popcorn will be observed, according to your TZ.
I work until full approval, for a week for free and immediately correct my errors that could be missed when receiving work and noticed later.
Vladislav, if you are willing to cooperate with me, please write in personal messages where we can discuss details with you: Freelancehunt
Budget: 8000 UAH Deadline: 7 days
Good day !
I read the checklist. Does the question only for the media request have to be submitted in a separate file? This is not convenient because the file division goes through blocks and it writes styles.
A large number of projects of such a plan
HTTPS://vpnpu.com.ua/ here is an example of my work
HTTPS://test.voodoo-agency.com/ and that’s what I’ve done
Budget: 15000 UAH Deadline: 7 days
2 Hello to you.
I’m specializing in adaptative layer and putting it on WordPress.
Create a clean, valid, compact and cross-browser code. Look at the work in my profile.
I will be happy to cooperate.
Budget: 5000 UAH Deadline: 7 days
two .
Welcome to Vladislav! Ready to implement your project in accordance with these requirements. Quality and complete completion of the project
- Projects 3
- Rating -
- Rating 281
Budget: 22000 UAH Deadline: 10 days
Go to turn. I do it quickly and efficiently on the Joomla CMS. according to all your requirements.
Clean code, BEM line, modular approach, Sass, Pug, JS.
Some of the last works:
HTTPS://med-click.ru/home.html
HTTPS://www.mcmedok.ru
by HTTPS://reloft.art
HTTPS://ensol-ltd.ru
HTTP://pama13.ru/dev-manicur/home.html
HTTP://www.correas.ru
HTTP://world-gym.com/
Budget: 1750 UAH Deadline: 7 days
Congratulations to you, Vladislav! I will help with the project line and WordPress press, without designers as you have indicated in the project description.
Budget: 15000 UAH Deadline: 7 days
Hello to you!
Ready to implement the project.
The price is 15000g
Deadline of 7 days
Budget: 2000 UAH Deadline: 5 days
Two
Hello, I will do everything quality and quickly. 5 years experience in web development.
Budget: 12000 UAH Deadline: 10 days
“Two”
I will do everything at the highest level... + I will add animation to vector drawings.
Budget: 6000 UAH Deadline: 6 days
Two
The price and deadlines are indicated. Let’s write, we’ll discuss the task. As a CMS I offer modx.
Budget: 9000 UAH Deadline: 10 days
Two
Welcome to Vladyslav!
A clean and valid code. Structure of code and tags is described under SEO requirements. I adjust the edge completely under all devices.
Integrate on WordPress with the ability to edit the content of the site with the admin panel a very convenient option.
to turn. Details will be discussed.
Projects performed by me: https://portfolio.webpanacea.com.ua
Budget: 12000 UAH Deadline: 14 days
I do it qualityly in accordance with your requirements.
I know crossbrowser, adaptivity, semanticity, optimization.
Reviews and portfolio in the profile
Budget: 7000 UAH Deadline: 10 days
Two
Welcome to Vladislav!Get acquainted with all the criteria and pattern, ready to deal with the line + landing on WordPress.I will put on the gulp setup, with minimal use of JS.My primary sphere: the line, site landing on CMS (Wordpress, Opencart, other solutions).Experience of more than 3 years.Versta will be semantic/valid
According to Google Page Speed, the download speed will be 90+ points.
I will set up hosting, set up sending applications from the site
I work to the last direction.✅✅✅Examples of time and price indicated.I hope for long-term cooperation, guarantee quality and compliance.Please call me, I'll be glad to help!My portfolio: https://bogdan-khavrych.github.io/portfolio/ru.html
My latest projects:
HTTPS://bighillsdr.com
HTTPS://artterrace.com.ua
HTTPS://caseid.com.ua
Budget: 1000 UAH Deadline: 1 day
I am ready to discuss the details of the integration of the wardrobe.
If the project is up to date, write in personal messages.
The price is based on the value of one working day.
The final price can be formulated by clarification of all requirements for implementation.
Budget: 3000 UAH Deadline: 3 days
Two
Welcome, I will make your order in time and for a minimum budget.
The site will be adaptive and stylish. I will run the landing on the WP of the required pages, optimize everything and take it out to the green zone, everything will be easily edited from the admin panel. I work on TZ with your supplements, and if you need advice with pleasure help!
I offer cooperation!
Glory to Ukraine!
Examples of my latest works:
by HTTPS://accu.in.ua
by HTTPS://kiriforum.com
Budget: 7500 UAH Deadline: 8 days
Two
Good morning, I can only set up your site, make it as optimized as possible and with the possibility to maintain it conveniently in the future style on the site. There are also contacts with people who can dress on WP or something else.
Budget: 4000 UAH Deadline: 4 days
Two
Hello to Vladislav.
With Requirements and checklist familiar, ready to cooperate with you.
I'm going to do all the tasks, taking into account the landing on the CMS.
My line is completely cross-browser, perfectly optimized under SEO and pagespeed, I use modern images, font formats.
There is no extra code, I will check the code for validity completely before submission.
I will do everything without designers, honestly and openly.
There is experience in developing a variety of projects, online stores, landings, etc. The Portfolio)
Details can be discussed in Ls.
Thank you for your attention, Vladislav!
I hope for further cooperation.
Oleh B.
Winning proposal- Projects 60
- Rating 5.0
- Rating 10 900
Budget: 7000 UAH Deadline: 5 days
Two
Hello to you!
Ready to discuss details.
WordPress is well known, with over 10 years of experience.
GULP + PUG + SCSS + JS
- Projects -
- Rating -
- Rating 115
Budget: 4000 UAH Deadline: 4 days
Hello to you. I have learned about your requirements to work and ready to start implementing right now. I will be happy to work with you. I will perform in the shortest time possible.
Example: mordyk.com_ua
Proposals concealed
Proposals are currently absent
Current freelance projects in the category Content Management Systems
A business website needs to be developed with several pages (about 5 typical ones). The main page will have around 11 blocks. The niche is "Modular Houses." The work includes: selecting a template deploying and configuring adjusting the necessary blocks and pages (there is currently a rough structure) adding all necessary content considering recommendations from the SEO specialist and contextual marketer The result should be a website ready to launch in advertising. Essentially, this is the work of a web developer + content creator. The performer should be sufficiently proactive, technically skilled, and not just a doer but also a thinker on the project – proposing better solutions along the way, thinking in terms of business results rather than just tasks to be completed. The task is not complicated, and there are no special design requirements. Overall, it should result in a fairly simple yet stylish website. Separately, a rate per hour for content work is needed, as we will further populate the service pages and add articles to the blog. A performer is needed who can handle similar projects on a regular basis. Usually, such tasks come with a request like "I need a small, inexpensive website based on a template" – I think everyone has encountered such clients: the business owner does not have much knowledge about websites and needs to be offered an optimal solution.
We are looking for an experienced Embedded developer to create energy-efficient firmware for a wearable device (form factor: chest strap) for monitoring psychophysiological state. The circuit design is complete, and development will be based on a development kit with subsequent transfer to a custom board.Stack and hardware base:MCU: Nordic Semiconductor nRF52840 or nRF5340.Development environment: nRF Connect SDK / Zephyr RTOS (strictly C/C++).Peripherals:Optical pulse sensor (PPG) — operates via I2C.6-axis inertial sensor (IMU accelerometer + gyroscope) — operates via SPI.Haptic motor driver (LRA 1030) — controlled via PWM.External SPI Flash memory for cyclic logging.Work scope by stagesStage 1: Bring-up, peripheral drivers, and BLE telemetryGoal: Bring the hardware to life, set up stable data collection, and transmit it to a smartphone/PC.Configure I2C and SPI buses using DMA (Direct Memory Access) to offload the processor.Write/integrate drivers for PPG and IMU (configure polling frequency, sensor FIFO buffers).Deploy a custom BLE profile (GATT service) for real-time transmission of raw data from sensors.Basic initialization of PWM for controlling the haptic LRA motor (launch test vibration patterns).Stage 2: Algorithmic layer (DSP and multi-level feedback logic)Goal: Implement mathematical signal processing directly on the chip (Edge Computing) and device reaction logic.Implement algorithms for filtering motion artifacts: clean the PPG signal using accelerometer data (IMU).Extract R-R intervals (HRV) from the cleaned PPG signal.Implement 4-level system stability logic:Drift Level: Track gradual changes in HRV and breathing.Prediction Level: Calculate a mathematical trend for deterioration.Micro-correction Level: Generate barely noticeable haptic patterns on the LRA motor when a target data pattern is detected.Hardware Reset Level: Implement safety logic (high-intensity haptic pulse at critical metrics).Stage 3: Energy saving, logging, and fault toleranceGoal: Prepare the device for autonomous operation from a miniature battery and ensure "24/7" stability.Deep optimization of energy consumption. Put the MCU into sleep mode (System ON/OFF) between measurement cycles. The processor should wake up only on interrupts from sensor FIFO buffers or a timer.Write a fault-tolerant file system in external SPI Flash (e.g., LittleFS) for autonomous cyclic log saving.Configure a hardware watchdog timer to prevent firmware hangs.Requirements for the performer:Experience in commercial development for Nordic chips (nRF52/nRF53) of at least 3 years.Proficient in Zephyr RTOS and debugging tools (Segger Embedded Studio / VS Code, J-Link).Understanding of digital signal filtering principles (DSP) and low-power design.Having your own debugging kit (nRF52840-DK or similar) for starting work is welcome.Work format:Milestone payments with results documented on GitHub. Please indicate your hourly rate or approximate cost and timeline estimates for each of the three stages.
Project Description We are looking for an experienced developer or a small team to create a modern online store for an optical salon. The goal is not just to update the design, but to create an effective online sales tool that will become the main sales channel for the company in the future. The current website is already operational and has an SEO history, so it is important to maintain Google rankings as much as possible during the transition to the new site. We will base the UX and functionality on modern global optical online stores (for example, Warby Parker), but the solutions must be adapted to the Ukrainian market.Required Functionality WordPress + WooCommerce modern responsive design product catalog with filters Mega Menu selection of frames and lenses glasses order builder ability to upload a prescription online appointment for vision check online payment integration with Nova Poshta simple administrative panel product import SEO-friendly structure possibility of further integration of an AI consultantImportant A specialist is needed who has experience in creating online stores, understands UX, SEO, conversion, and can offer their own solutions for improving the project. A detailed technical task will be provided after the preliminary selection of candidates.Please include in your response Links to 3–5 similar implemented online stores. Your experience with WooCommerce. How you plan to maintain SEO during the site transfer. What improvements you recommend to increase conversion. Estimated cost of the project. Estimated completion time.Specialization ✅ Website creation ✅ Online stores and e-commerce ✅ WordPress ✅ WooCommerce ✅ PHP
It is necessary to develop a modern online store for electric, gasoline, and battery tools with a separate B2B platform for partners, dealers, and dropshippers. At this stage, I would like to receive a preliminary estimate of the cost, development timelines, and technology recommendations. (because I have a website on the Horoshop platform)Main Site The following should be provided: a product catalog with categories, brands, filters, and search; product pages with specifications, photos, descriptions, prices, and availability; cart and order checkout; customer personal account; adaptive version for phone, tablet, and computer; SEO settings; the ability to independently add and edit products, categories, pages, and banners; integrations with payment systems, delivery services, CRM, or accounting systems; import and automatic updating of products, prices, and stock.B2B Platform After authorization, the partner should have access to a separate account where they can: see individual or wholesale prices; view current product stock; create and track orders; view order history; see order statuses; view their balance, debts, payments, and settlements; upload invoices, waybills, and other documents; submit requests for returns, warranties, or service; receive notifications about new products, promotions, and price changes. It is preferable to provide different types of partners with varying prices, discounts, credit limits, and working conditions.Administrative Part The administrator should be able to: manage products, prices, and stock; create partners and assign them individual conditions; set personal discounts and limits; view all orders, payments, and debts; generate documents; view sales statistics; manage service, return, and warranty requests; send messages to individual partners or all users of the B2B platform; distribute access rights among employees.Important Requirements The system must be fast, secure, user-friendly, and suitable for further expansion. It is important that most information can be changed through the admin panel without the intervention of a programmer. In your response, please indicate: the estimated cost of development; approximate timelines; recommended technology or CMS; what is included in the cost; which integrations can be implemented; whether you provide further technical support; examples of similar online stores or B2B systems that you have developed. I am considering both a complete development from scratch and implementation on a ready-made CMS with further refinement for the necessary functionality.
Looking for an experienced developer OpenCart / ocStore who can transfer the existing online store to a modern version of the system and make several small improvements. First, an audit of the site is necessary! https://bigbears.com.ua/ Initial Data Active site on ocStore 2.3.0.2.3 The store is operational and accepting orders. It is necessary to maintain the store's functionality. The domain and hosting remain the same.Main Task The site needs to be transferred to the current stable version of OpenCart / ocStore. During the transfer, it is necessary to preserve: all products; categories; manufacturers; photos; attributes; options; SEO URLs; customers; order history; store settings (if possible).Additionally After the transfer, some small improvements need to be made. Currently, they are minor but may be added during the work process. For example: fixing minor bugs; small changes in the admin panel; small changes on the site; module configuration; fixing the display of individual elements.Requirements Experience specifically with OpenCart / ocStore. Preferably, completed projects. Work through a test copy of the site. Make a full backup before starting. Provide a working site without data loss after completion. It is preferable that after the project is completed, the contractor can make small improvements if necessary.What Will Be Provided The contractor will be provided with: FTP access; database access; admin panel access; hosting access if necessary.Please Indicate in Your Response Experience working with OpenCart / ocStore. Which versions you have transferred. Examples of completed projects. Completion time. Cost of work. What difficulties may arise during the transfer.