Switch to English?
Yes
Переключитись на українську?
Так
Переключиться на русскую?
Да
Przełączyć się na polską?
Tak

Sergey Didychuk

Offer Sergey work on your next project.

Ukraine Kahovka, Ukraine
6 hours 45 minutes back
A little busy a little busy
15 Safes completed
1 year back
13 clients
2 proposals made
on the service 5 years

Rating

Successful projects
89%
Average rating
No data
Rating
342
Embedded Systems & Microcontrollers
154 place out of 197
C & C++ 1
472 place out of 1374
8 projects
Embedded Systems & Microcontrollers
7 projects
C & C++
3 projects
Desktop Apps

Skills and abilities

Programming

Mobile development

Portfolio


  • Motherboard of the wheeled drone

    Embedded Systems & Microcontrollers
    A remote-controlled drone delivers mail or goods around the city...
  • System for monitoring the loading of chemical reagent rods into the well.

    Embedded Systems & Microcontrollers
    The main task of the system is to count the unloads (successful, stuck, empty) of reagent rods into the gas well (removal of water from the bottom of the wells using the reagent), maintaining a log of unloads, with the determination of the time and place (GPS data) of the unload, the ability to transfer the data log from the control device to the shift master's smartphone with the appropriate software via Bluetooth.
  • System for measuring the flow of chemical reagent by weight method

    Embedded Systems & Microcontrollers
    The system doses the supply of liquid reagent into the gas well.
  • Control system of granulation

    Embedded Systems & Microcontrollers
    The creation of the ASU of the granulation plant (mast extraction plant). Description of the software for the Siemens Simatic S7-400 controller and the implementation of the SCADA visualization system (WinCC).
  • Apparatus for Wending Automatic

    Embedded Systems & Microcontrollers
    The system reads the RFID card, sends a PUT request to the server( via media or WiFi), with a positive response on the balance connects with the automatic controller (MDB) and gives the command to the vacation. receiving feedback - manages to the server data on the operation...
  • Equipment for the City Questa

    Embedded Systems & Microcontrollers
    The device is programmed and memorizes the coordinates of 6 points on the locations (GPS module), then when enabled is no longer in the programming mode, but in the state - indicates the indication from 4 LEDs the direction of the movement in parallel to each of the recorded points in the memory (work synchronically GPS modules and magnetometers ("digital compass")). When players enter the right point, the device disable the indication of the direction, includes the record of the voice clue, awaits the password input (keyboard) and with the right input - leads players to the next point.
  • System of Automated Drying

    Embedded Systems & Microcontrollers
    The system is controlled both locally (click on the controller body) and remotely from any Android device (from the application). In the controller is installed a GSM module, for connection with the server, through which it is the exchange of data with the application. There is the possibility to choose the amount of the irrigation zones, the time of irrigation of each zone in the cycle until the moment when the moisture of the soil reaches the given level. The humidity is measured by the sensors of the emcostic type.
  • The flexible system of control

    Embedded Systems & Microcontrollers
    Control of the machine through a touchscreen display. The ability to ask: the number of iterations, the angles and their quantity in each iteration, the angle of the stretch and so on. The number of iterations is traced and displayed in the separate menu, the passes are stored in the energy-dependent memory. The drive of the engine is implemented on the step engine.

Reviews and compliments on completed projects 16 2

2 October 2024 23 USD
Control device

Quality
Professionalism
Cost
Contactability
Deadlines

Sergiy completed the work quickly and competently.
During the discussion, he showed interest in the project and suggested alternative solutions that helped in the implementation process.
I will continue to collaborate with Sergiy.
I recommend him to everyone!

3 December 2023 902 USD
Laser labyrinth: Part 2

Quality
Professionalism
Cost
Contactability
Deadlines

Good day .Unfortunately, they are forced to close the order and leave a negative feedback, as the project was not and will not be completed by this executor.Chronology of events:
On April 18, 2023 the project was initiated.Duration of work: 2 calendar months.The cost of the work: 80 thousand SEK (the commission for "Safe" is paid by the customer).Due to the impossibility of entering 80 thousand by one payment, the project was formally divided into 2 parts by 40 thousand SEK.- On 1 June, the executive informed the customer that "can't guarantee that it will be invested (in time)", as there are "a lot of nuances",
which he could not foresee at the planning stage.On June 18, the executive sent a video with a demonstration of the work of the system.On the question asked on June 19, whether the system was checked with laser rather than LEDs (but we have the "Laser" labyrinth project), the answer was: "Welcome.I didn’t buy the laser and I didn’t have them in the stock, I check on the diodes.”We were contacted via telegram: there was a need to discuss the situation by voice, not by text.The executive warned us that despite the difficulties he will be able to complete the project.I apologized for the broken deadlines.On 25 August, nine weeks after the deal was agreed at the very beginning of the deedline, the executive announced that the project was ready and that he sent it to the customer by mail.On August 29 the mail was received by the customer.- September 12 after the system was collected in accordance with the scheme sent by the executive.Unfortunately, it didn’t work, about which the customer informed the executor.For the next 10 days, the customer was in constant contact with the executive, trying to solve the problem.On 22 September, the customer addressed the executive through the platform with a number of specific questions to which he did not receive answers.During the next 10 weeks, numerous attempts were made to force the system to work, which cost the customer funds (payment of the work of specialists) and time (according to the agreement, the system should have been working for more than 5 months).These attempts did not lead to the system's work.The end:
- 33 weeks later (with a period of 8 weeks) the customer has not yet received the work system,
The amount of funds (basic fee, additional purchases, the payment of the work of the specialists) and time (lost profit) are spent in order to come to understanding with the executor.The executive did not perform his work neither in the period nor in 25 weeks after the deadline.The customer requires the full refund of the funds entered in the seafood.

L K | Personal

3 December 2023 902 USD
Laser labyrinth

Quality
Professionalism
Cost
Contactability
Deadlines

Good day .Unfortunately, they are forced to close the order and leave a negative feedback, as the project was not and will not be completed by this executor.Chronology of events:
On April 18, 2023 the project was initiated.Duration of work: 2 calendar months.The cost of the work: 80 thousand SEK (the commission for "Safe" is paid by the customer).Due to the impossibility of entering 80 thousand by one payment, the project was formally divided into 2 parts by 40 thousand SEK.- On 1 June, the executive informed the customer that "can't guarantee that it will be invested (in time)", as there are "a lot of nuances",
which he could not foresee at the planning stage.On June 18, the executive sent a video with a demonstration of the work of the system.On the question asked on June 19, whether the system was checked with laser rather than LEDs (but we have the "Laser" labyrinth project), the answer was: "Welcome.I didn’t buy the laser and I didn’t have them in the stock, I check on the diodes.”We were contacted via telegram: there was a need to discuss the situation by voice, not by text.The executive warned us that despite the difficulties he will be able to complete the project.I apologized for the broken deadlines.On 25 August, nine weeks after the deal was agreed at the very beginning of the deedline, the executive announced that the project was ready and that he sent it to the customer by mail.On August 29 the mail was received by the customer.- September 12 after the system was collected in accordance with the scheme sent by the executive.Unfortunately, it didn’t work, about which the customer informed the executor.For the next 10 days, the customer was in constant contact with the executive, trying to solve the problem.On 22 September, the customer addressed the executive through the platform with a number of specific questions to which he did not receive answers.During the next 10 weeks, numerous attempts were made to force the system to work, which cost the customer funds (payment of the work of specialists) and time (according to the agreement, the system should have been working for more than 5 months).These attempts did not lead to the system's work.The end:
- 33 weeks later (with a period of 8 weeks) the customer has not yet received the work system,
The amount of funds (basic fee, additional purchases, the payment of the work of the specialists) and time (lost profit) are spent in order to come to understanding with the executor.The executive did not perform his work neither in the period nor in 25 weeks after the deadline.The customer requires the full refund of the funds entered in the seafood.

10 August 2023 11 USD
Consulting on Electronic Devices

Quality
Professionalism
Cost
Contactability
Deadlines

I got a consultation. For further cooperation, it is necessary to identify with the questions raised in the process of conversation.

Quality
Professionalism
Cost
Contactability
Deadlines

Professionally within the time limit.

Quality
Professionalism
Cost
Contactability
Deadlines

OK, thank you, I am happy to collaborate.

10 November 2021 90 USD
Нужна помощь с электроникой машинки на автономной системе управл. ч2

Quality
Professionalism
Cost
Contactability
Deadlines

Все супер! )) Рекомендую!

Quality
Professionalism
Cost
Contactability
Deadlines

A wonderful performer! He knows his work very well, works efficiently and efficiently. I definitely recommend! and 🙂

27 September 2021 56 USD
Создание системы связи на основе микроконтроллераESP8266

Quality
Professionalism
Cost
Contactability
Deadlines

Работа выполненна раньше установленного срока и качественно.

15 September 2021 68 USD
Интерфейс для проекта на четырех энкодерах и stm32

Quality
Professionalism
Cost
Contactability
Deadlines

Адекватный специалист, проект сделал хорошо. Работать можно, но нужно держать руку на пульсе)

9 September 2021 11 USD
Simple task for managing the arduino

Quality
Professionalism
Cost
Contactability
Deadlines

Proficiently and professionally, I advise

Quality
Professionalism
Cost
Contactability
Deadlines

The work was done, no comments.

15 July 2021 29 USD
SP32+GPS

Quality
Professionalism
Cost
Contactability
Deadlines

The task is resolved in a short time.Optimal way and with the understanding of the question!There were additional incentives for further interaction!I recommend!

Profile deleted | Safe Safe | Response review

26 June 2021 182 USD
Prototype of the device

Quality
Professionalism
Cost
Contactability
Deadlines

Excellent execution, made the work clear and fast, there was a lot of corrections made everything great !!The !

16 May 2021 20 USD
Доработать код для ESP32 по ТЗ

Quality
Professionalism
Cost
Contactability
Deadlines

Задача выполнена в четком соответствии с техническим заданием.
Срок выполнения раньше оговоренного.

Profile deleted | Personal | Response review

2 May 2021 6 USD
Доработать код программы на ESP32

Quality
Professionalism
Cost
Contactability
Deadlines

Доработал ранее написанную программу как было оговорено в ТЗ.
Благодарность и рекомендации!

Profile deleted | Personal | Response review

Quality
Professionalism
Cost
Contactability
Deadlines

Everything was done as they agreed on the TZ, made the code for a day, was in contact, during the check of the program explained and launch the code on my iron. Specialist in his business. I recommend !

Profile deleted | Safe Safe | Response review

10 April 2021 6 USD
Нсписать скетч на Arduino Nano

Quality
Professionalism
Cost
Contactability
Deadlines

Спасибо очень огромное Сергею, очень профессионально отнёсся к Моему проекту за что отдельное Спасибо. Были проблемы не со стыковкой железа, человек переписал программу под мой дисплей и очень внимательно меня выслушал, что требовалось сделать по моему описанию над проектом. Заказ был выполнен в оговорённые сроки еще порадовала цена в итоге Я получил то что хотел за разумные деньги что не может не радовать. Если будут еще проекты буду всегда обращаться к Сергею, надеюсь это мой не последний проект. В итоге Я получил то что хотел.

Activity

  Latest proposals 10
Air solar collector controller
564 USD
Development of a water dispenser controller from scratch
28 USD
Development of a wifi module
609 USD
LiDAR scanning
564 USD
Need an industrial automation engineer
50 USD
Specialist in Tia Portal V18 Siemens
34 USD
Need a specialist in Siemens TIA Portal V18
34 USD
Development of a controller for a water dispenser
609 USD
Development of the interface for ESP32
28 USD
Creation and programming of an ant farm management system + mobile application.
28 USD