A3188a - Development of a 3D model and 2D drawings from a point cloud
223 USD For the future architectural project, it is necessary to model the building based on the point cloud, and also to develop a 2D drawing with the main dimensions, total areas of the premises, and living areas for budget calculation.
basement with a terrace and pool – 500 m2;
1st floor – 250 m2;
2nd floor – 150 m2;
Total: 900 m2.
The detailed task (in the attachment) and the initial data (point cloud and 3D tour) can be found at the link:
https://drive.google.com/drive/folders/1EdMoDHZLQLpfwkzHFz1LRHjdU5keCr5k?usp=drive_link
Please note that there are two buildings in the point cloud and 3D tour. This project includes only one small building - marked in green, the building marked in red - is not included in the scope of work.
I am waiting for your cost and the necessary time for development!
Applications 1
Client's review of cooperation with Tatyana Gramatik
A3188a - Development of a 3D model and 2D drawings from a point cloudEverything is fine, as always! On time and with quality!
Freelancer's review of cooperation with Oleksandr Parobets
A3188a - Development of a 3D model and 2D drawings from a point cloudVery nice to collaborate!
-
Доброго дня, Олександр. Ознайомилася з вашим поставленим завданням щодо умов подачі проекту.
Є питання: «Чи буде для вас зручним, якщо проєкт я буду робити у ліцензованій офіційній версії?»
-
Доброго дня! Не розмію вашого питання. Тут всі працюють у ліцензованих офіційних версіях.
-
Прохання до всіх дивитись вихідні дані перед тим, як надсилати пропозицію!
-
Дякую за відповідь.
-
Current freelance projects in the category Architectural Design
Correction of the SketchUp model + apartment layout designASSIGNMENT — Correction of the SketchUp model + apartment layout design Hello, I am looking for someone to make corrections to the architectural project of a residential estate. What exactly needs to be done: 1. Narrowing the building volumes in SketchUp The current depth of the… Architectural Design, 3D Modeling ∙ 5 hours 57 minutes back ∙ 4 proposals |
Cottage made of SIP panelsServices of a designer are needed for the development of a project for a country house made of SIP panels. The foundation is made of concrete blocks. Architectural Design, Drawings & Diagrams ∙ 10 hours 20 minutes back ∙ 5 proposals |
Project of house AR-KR 115m
1300 USD
House with a flat roof. Duplex. Sakhalin Region, Yuzhno-Sakhalinsk Accept the height from the rough floor as 3.2 m. Provide a flat roof. Perform the slope during the roofing pie and insulation stage. Develop an option for the house box entirely made of monolithic reinforced… Architectural Design ∙ 10 hours 48 minutes back ∙ 2 proposals |
Project of a frame workshop / utility block
100 USD
It is necessary to develop a structural project for a small frame workshop (utility block) for a private house.Main parameters Size by external contour: approximately 5 × 4.5 m Planning — as per the scheme Single-storey building Foundation — concrete slab with a caisson… Architectural Design, Drawings & Diagrams ∙ 3 days 3 hours back ∙ 10 proposals |
Car canopy project
22 USD
Need to design a canopy Size 6m by 8m for 2 cars Need a visual, list of required materials Metal frame, preferably on 4 or 6 columns Trusses Profile sheet Gutter Architectural Design ∙ 3 days 15 hours back ∙ 12 proposals |
Kyiv