Project translated automatically. Log in or register, to view the original For the constant current power system, you need to apply a battery group of 17 pieces of 12V 100Ah AGM batteries.It is necessary to create a drawing of the stallage (not the closet), namely the stallage for the placement of the batteries.It is important to note that the batteries are heavy enough, i.e.The frame must be sufficient so that the steelage remains monolithic under the influence of the battery weight.Initially, they are interested in the basic sizes, the appearance, the location of the batteries on the plate, the high detail is not required yet.Data on the weight and attachment sizes of the batteries and example in the insert.Between the batteries you need to provide a distance for natural air circulation of 20-30 mm, above the batteries leave at least 100-120 mm for the convenience of the installation of connective locks.Pre-ordinated installation of batteries on the plate 5 x 3 plate + 2 x 1 plate = 17 plate on 4 plate.The battery length is 305 mm, i.e.The depth of the plate will be 350 mm width of the battery 168 mm in a series of 5 pieces with a stock of 30 mm on each side of the battery = 30+168+30+168+30+168+30+168 ≈ 990 mm height (215 mm + 120 mm) x 4 plate ≈ 1400 mm.Therefore, the example size of the plate should be: 380*990*1300 mm.The calculated load on the plate up to 200 kg, the actual 155 kg.So on the plate itself please display the location of the battery.Thank you!

Proposals 1 Discussions 1

Sergey Garachuk

Winning proposal

1 0

Projects -
Rating -
Rating 85

Budget: 200 UAH Deadline: 2 days

Ready to do the job! Are there requirements for the selection of material?

Current freelance projects in the category Drawings & Diagrams

Development of assembly diagrams for furniture

5 proposals 16:49

603 USD
Site layout plan scheme

Infographics 7 proposals 11:28

Not specified
Technical project drawings for apartment renovation.

Interior Design 32 proposals 4 August

Not specified
Minimum technical project for apartment renovation

Interior Design 29 proposals 4 August

Not specified
3D model in ArchiCAD and facade design.

Architectural Design 10 proposals 3 August

156 USD

Artem A.
Kyiv, Ukraine
ТОВ "Тотал-Енерго"

Projects 15
Rating 5.0
Rating 650

Artem A.

Sergey Garachuk

Sergey Garachuk

Proposals are currently absent

Current freelance projects in the category Drawings & Diagrams

Development of assembly diagrams for furniture

Site layout plan scheme

Technical project drawings for apartment renovation.

Minimum technical project for apartment renovation

3D model in ArchiCAD and facade design.