Budget: 15000 UAH Deadline: 25 days
Виконаю вказаний в повідомленнях перелік робіт. Вартість 14-15 т. грн. Термін орієнтовно 25 днів. Було приємно поспілкуватися.
Budget: 15000 UAH Deadline: 25 days
Виконаю вказаний в повідомленнях перелік робіт. Вартість 14-15 т. грн. Термін орієнтовно 25 днів. Було приємно поспілкуватися.
Budget: 14000 UAH Deadline: 15 days
Виконаю конструкції, ціну вказав, великикй досвід, виконаю швидко і якісно, можу виїхати на обєкт, не так давно був обєкт біля петр. Борщагівки.
Budget: 200 UAH Deadline: 2 days
Архитектор-дизайнер❤️
Предлагаю услуги по планировочным решениям и дизайну вашего дома и обустройству мебелью.
Имею образование в плане реконструкции, реставрации, градостроительства, создание сметы,архитектурного проектирования чертежей вручную и в электронном виде,дизайн интерьера,ландшафтного дизайна и дизайна архитектурной среды,рисунка, проектирование мебели.
Знания таких предметов как:
-конструкции зданий и сооружений(конструктивные элементы зданий и сооружений)
-основы технологии(составление календарного плана)
-экономика строительства(составление сметы вручную и в АВК5)
Имею знание стандартных программ(Microsoft Office,Paint) и знание программ: AutoCad, ArchiCad, Artlantis, SketchUp, Lumion, VRay, Adobe Photoshop
Ссылка на портфолио: Google Drive
Budget: 10000 UAH Deadline: 20 days
Готові виконати ваш проект.
Досвід роботи більше 7 років, в проектуванні житлової забудови різної складності.
Виконуємо архітектурний та конструктивний розділ. Фотореалістична візуалізація.
Звертайтесь за додатковою інформацією.
Budget: 18000 UAH Deadline: 30 days
Добрый день. Сделаю весь конструктив. При необходимости могу предложить услуги инженеров внутренних сетей.
Budget: 12000 UAH Deadline: 15 days
Добрий день. Можу виконати. Є сертифікат, можливість підписати договір. Зв'яжіться зі мною для обговорення деталей.
З повагою, Олексій.
Budget: 2000 UAH Deadline: 14 days
Доброго дня! Готовий виконати конструктивну частину (фундаменти, кладочний план, перекриття, сходи, крокв"яну систему даху), приклади робіт можу скинути на пошту!
Budget: 15000 UAH Deadline: 30 days
Доброго дня, готовий виконати проект. Сертифікований інженер - проектувальник. Територіально м. Київ. Детплі в особисті повідомлення
Budget: 200 UAH Deadline: 21 days
Здравствуйте, сделаю техническую часть проекта.
Пишите, обсудим детали. Буду рад сотрудничать
https://portfolio-f37719.webflow.io/
Вітаю. Які креслення потрібні? Фундамент, перекриття, перемички, дах,...?
Такий перелік влаштує, чи потрібно щось додати або видалити?
- план фундаментів, відомість бетону та арматури, перетини фундаменту;
- план перекриття, армування, відомість бетону і арматури;
- план перемичок, специфікація перемичок з розмірами та армуванням кожної перемички (8 різновидів по розмірах дверних та віконних прорізів), відомість бетону і арматури;
- план дерев'яних елементів даху ( мауерлати, прогони, крокви, бантини), відомість деревяних елементів покрівлі (мауердати, прогони, крокви, бантини, обрешітка);
- плани та розгортки вентканалів, кількість цегли для мурування;
- схематичне просторове зображення (3D картинка в кольорі) внутрішньої каналізаційної мережі будинку і консультація щодо розміщення локальної каналізації на прибудинковій території.
Все що ви перечислили і балкон з терасою і бажано системою вентиляції
Потрібно, щоб ви написали мені приватне повідомлення або відкрийте можливість написання приватних повідомлень для вас.
Зробив ставку за вказаний перелік , якщо порядок цін влаштує, можна буде говорити про терасу, балкон та вентиляцію. Надалі пишіть в приват. Бажаю успіху.
Відкрийте можливість написання приватних повідомлень або напишіть мені повідомлення.
Task: Designing an interior magnetic lock with forced retraction of the magnetic slider.Basic analog (reference for dimensions): AGB TouchCritical difference from the analog (Essence of the mechanics):In the original AGB Touch, the slider with the magnet is retracted only by the force of the door's locking/pulling. In the developed lock, it is necessary to implement forced mechanical retraction of the magnetic slider into the housing with a slight pull of the door handle towards oneself.Mechanism operation logic:In the initial position (handle in the initial position), the slider with the neodymium magnet is pushed forward by a built-in spring (towards the strike plate of the frame).When pulling the door handle towards oneself, the internal catch (lever finger) should slightly engage the magnetic slider and forcibly pull it inside the lock housing, completely hiding the magnet in the end.Upon releasing the handle, the return spring returns the magnetic slider to the initial (extended) position.A locking device should be provided to block the movement of the door handle towards oneself. Similar to a WC lock.Output requirements: Assembly in STEP or IGES format, suitable for test 3D printing on an SLA/FDM printer.
Develop for two devices: general assembly drawing of the metal frame; general assembly drawing of the service platforms; detailed drawings of ladders; detailed drawings of railings; detailed drawings of equipment supports; specification of metal products; St3 or 09g2s As a result of the design, it is necessary to obtain: 3D model of the frame. General assembly drawing. Specification of metal products. Calculation of the load-bearing capacity of the structure (will be a plus). Description of the device:ParameterValueType of deviceVertical reactor with a stirrerWorking volume2.0 m³Total volumeabout 2.36 m³Body diameterabout 1500 mmHeight of the deviceabout 4265 mmBody materialSteel with enamel coatingType of stirrerAnchorStirrer rotation frequencyabout 85 rpmHeat carrierThermal oil
Development of a mechanism for alternating the flipping of plastic cupsProject Goal It is necessary to develop only the mechanism for flipping plastic cups "every other one" for an automatic production line. The device must ensure the following sequence: 1st cup — without flipping (0°) 2nd cup — flip 180° 3rd — without flipping 4th — flip 180° and so on. As a result, the output should produce the sequence: 0° → 180° → 0° → 180° → ...What is already available The cups move along the conveyor in a single row. Before the mechanism, all cups have the same orientation (lid up). Only the flipping unit needs to be developed.Proposed Operating Principle The following scheme is considered: A dividing screw synchronizes the flow of cups. All cups gradually rotate to the position of 90°. Then, the cam mechanism acts only on every second cup. Every second cup returns from the position of 90° back to 0°. The others continue rotating to 180°. As a result, we get: 0° 180° 0° 180° If the performer offers a simpler, more reliable, or more technological solution — we are ready to consider it.Requirements1. Develop a complete 3D model in SolidWorks It is necessary to model: dividing screw; flipping mechanism; cams; guides; shafts; mountings; all necessary parts.2. Perform kinematic verification It is necessary to ensure that: the mechanism operates without jamming; there are no intersections of parts; the cups are flipped correctly; the mechanism is suitable for manufacturing.3. Conduct Simulation / Motion Study It is necessary to perform an animation of the mechanism's operation in SolidWorks Motion. It should be visible: the movement of the cups; the rotation of parts; the sequence of flipping every second cup.Work Result The performer must provide: source files SolidWorks (*.SLDPRT, *.SLDASM); assembly; Motion Study; animation video; STEP file of the assembly; drawings of the main parts.
It is necessary to make an analysis of the project (drawing) of the advertising installation with a description. Dimensions: Width: up to 2.25 m Height: up to 2 m Depth: up to 1 m
packaging solutions / flexible packaging). It is necessary to develop a prototype of a two-chamber packaging for a food product. Idea: The packaging consists of two separate chambers with different ingredients. Upon strong compression of the packaging, the internal partition should controllably break, after which the contents of the two chambers mix. The user then shakes the packaging and opens it for consumption. Requirements: Develop the packaging design. Select materials and production technology. Create a working prototype. Prepare the packaging for mass production. If necessary, assist in finding a manufacturer. Preferred experience: Flexible packaging (sachet, doypack, flow-pack, etc.). Development of custom packaging solutions. Food products or dietary supplements. Understanding of film welding technologies and creating breakable internal partitions. Example concept — BOOMSHOT packaging (in the photo): two chambers that mix upon compression.