Cyberpunk skyscraper model with lighting in Blender
60 USD A building model needs to be created with a height of ~10 meters and levels of 50 cm each. (There should be a total of 18 residential levels + a foyer + space under the roof for a sign installation)
Inside, there should be a schematic elevator shaft (50x30cm), which is placed in the center of the building. No detailed design is required. 
The size of the building is 2 meters by 1 meter (height 10)
Inside, there is one partition that divides the level into 4 equal units.
The first floor is the foyer, and division into units is not needed.
The side of the building (1 meter) can be solid, but the front (2 meters) cannot, due to the risk of wind load. The front side is made of a grid (to allow the wind to pass through) and acrylic in the center of the unit, which serves as a window. The width of the window is 30 cm. 
The main focus during creation is on lighting. It will be made from existing neon strips of one color
and addressable LED strips that can light up in different colors and blink as desired.
Other LED lights can also be used, but not exceeding 12 volts and must be IP65 (67)
The placement of the lights is at the discretion of the modeler, but it is essential to highlight the contours of the floors.
At the top of the building, there should be a neon glowing logo of BambuLab installed on a frame or directly on the building (at your discretion)
The building should be stylish, cool, but realistic for assembly on the ground. It is planned to be lifted by a crane for installation. A metal square (50mm*50mm) is planned to be used for the base.
No detailing for assembly is required - the main goal is to create a demo model and visualization.
The model needs to be assembled in Blender, as my overall scene is in Blender. I plan to import the model with the configured lighting.
References are available at the link, but in general, the building can be approximately in this style
Рефы есть по ссылке, но в целом здание может быть примерно в этом стиле
Applications 1
-
3 days800 USD
2682 35 0 3 days800 USDGreetings!
The main task here is to skillfully arrange the lighting and contours so that the object looks like a real cyberpunk skyscraper, not just an ordinary box with neon.
Here are some of my works, where you can clearly see what I mean:
https://freelancehunt.com/showcase/work/value-exchange/2002925.html
https://freelancehunt.com/showcase/work/seequence/1996061.html
https://freelancehunt.com/showcase/work/upstate/2013111.html
If the result is important - write to me, we will discuss.
-
2 days100 USD
1341 5 0 2 days100 USDGood day to you! My name is Bohdan, I am the founder of the company High Digital League 🙂 A team that already has 16 active members with 5+ years of experience
We can implement designs of any complexity! Please write to us in private to discuss the details of the project
We will send examples of completed works in private 🤝
-
2 days60 USD
755 9 0 2 days60 USDHello😌
We have experience in 3D modeling of architectural objects. We can develop a model of a building 10 m tall with levels divided by 50 cm, featuring a central elevator shaft and internal zoning. We will consider the cyberpunk style and a design suitable for real manufacturing using metal profiles, acrylic, and composite materials, as well as a lattice facade part to reduce wind load.
We will prepare a neat 3D model without excessive detailing, with correct geometry for further implementation. We are ready to discuss the details and start working😊
-
5 days100 USD
175 5 days100 USDHello!
I have reviewed your technical assignment for the development of a 10-meter structure, the project is interesting. I have experience in 3D modeling of objects and environments, I will execute it clearly according to the specified task.
I will be happy to collaborate!
-
1 day60 USD
2259 5 1 1 day60 USDHello! I have reviewed your assignment and believe that I can successfully complete it. I would be happy to collaborate, please write to me personally for further details.
-
5 days999 USD
475 2 0 5 days999 USDready to help you out
-------------------------------------------------------------------------------------------
-
6 days600 USD
8329 46 1 6 days600 USDHello! I am Volodymyr, 10 years in 3D (Blender, UE5). I will create a stylish cyberpunk object, adapted to real materials. 🦾
### What you will receive:
.blend file: Fully ready for import into your scene with configured lighting. 📂
Construction: I will consider a profile of 50x50, wind grids, and level sizes of 50 cm. 🧱
Lighting: Realistic neon and address strips through Emission materials. ✨
Details: Elevator shaft, acrylic windows, and BambuLab logo on the roof.
### Portfolio:
[
Freelancehunt]🎥
Ready to start. Shall we discuss the deadlines? 🤝
Current freelance projects in the category 3D Modeling
Backpack design*Backpack design: visualization and 3D model** Looking for a product designer or industrial designer with experience in accessories, bags, or gear. **What needs to be done:** — Develop the appearance of the backpack based on my references and wishes — Prepare high-quality… 3D Modeling, AI Art ∙ 6 hours 5 minutes back ∙ 2 proposals |
Designing parts (pads for a bag for 3D printing)
22 USD
A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 14 hours 7 minutes back ∙ 8 proposals |
Visualization of a chair
45 USD
There is a 3D model of a chair. Changes need to be made to the backrest and the fabric on the seat needs to be replaced. It should be made as similar as possible to the photo. I am attaching the photo. I will provide more detailed specifications with links to the fabric textures… 3D Modeling ∙ 1 day 15 hours back ∙ 45 proposals |
3D model of a "banana" bag with a die-cut handleTask: 3D model of a "banana" bag with a die-cut handle (for interactive mockup)1. Purpose A parametric 3D model of a polyethylene "banana" bag with a die-cut handle. The model will be used in a web viewer (Three.js / glTF) for an interactive mockup: the client's print layout is… 3D Modeling ∙ 1 day 15 hours back ∙ 2 proposals |
3D Model of the HOTAS Handle
100 USD
A 3D modeler with experience in Rhino or Plasticity is needed to create an ergonomic CAD model of a HOTAS grip (joystick handle). The basis should be the Virpil Constellation Alpha, and its external shape and ergonomics should be reproduced as accurately as possible based on the… 3D Modeling ∙ 2 days 15 hours back ∙ 2 proposals |
Nha Trang