Budget: 650 UAH Deadline: 7 days
Добрый день. Я из Харькова. Есть опыт сотрудничества и выполнение похожих заказов. Буду рада выполнить работу . Мои проекты https://www.instagram.com/_kvikdesign_/
добрый день!
на сайт натяжных потолков требуется 2-3 изображения (3д) современного интерьера высокого качества разрешения.
матовый белый натяжной потолок, парящие участки с подсветкой, трэковое освещение, черные ниши в натяжном потолке , скрытые карнизы и пр. современные решения. от каждого элемента декора потолка ( на одной картинке не более до 5 элемента) требуется линия-сноска с описание
пример прилагаю
Budget: 650 UAH Deadline: 7 days
Добрый день. Я из Харькова. Есть опыт сотрудничества и выполнение похожих заказов. Буду рада выполнить работу . Мои проекты https://www.instagram.com/_kvikdesign_/
Budget: 1000 UAH Deadline: 3 days
Добрый день, Дмитрий! Я дизайнер интерьера, готова выполнить ваш заказ. Предоставлю изображения высокого качества. Мое портфолио: Behance
Budget: 6000 UAH Deadline: 3 days
Добрый день. Только закончил проект дома в Киеве в современном стиле. Применял трековые светильники..
Budget: 2800 UAH Deadline: 7 days
Добрый день! Приглашаю к сотрудничеству! Я дизайнер интерьера с опытом работы более 3-х лет, с реализацией в проектировании квартир по всей Украине и России. Выполню ваш проект точно в указанные сроки, в наивысшем качестве. С моими работами можете ознакомиться на сайте http://kulygindesign.com.ua
Кулыгин В.Е.
Пн.-Пт. 8:00-19:00
Budget: 678 UAH Deadline: 1 day
День добрый,Дмитрий.
Предлагаю свои услуги по 3d моделированию и визуализации вашего натяжного потолка.
Вот ссылки на мои работы:
https://www.facebook.com/architect.studio125/
https://www.instagram.com/studia125/
Behance
https://www.artstation.com/aikigek5775
С уважением,
Геннадий.
Budget: 250 UAH Deadline: 3 days
Дмитрий, здравствуйте. Делаю дизайн интерьера с натяжными потолками с дальнейшей 3д визуализацией помещения. Есть примеры реализованных работ. Работу приложу в личной переписке.
Портфолио: Behance
Работаю без предоплат. Оплата по факту выполненной работы. Всегда оперативно работаю и выхожу на связь. Отвечаю сразу.
Готов приступить к выполнению работы в ближайшее время.
Budget: 4000 UAH Deadline: 4 days
Здравствуйте, Дмитрий.
Очень заинтересовал ваш проект, хотела бы предложить свои услуги.
Я работаю дизайнером и занимаюсь архитектурной визуализацией. По образованию архитектор.
Моё портфолио:
Behance
Несколько уточнений по проекту:
1. Я так понимаю все картинки должны быть с акцентом на потолке? Ракурс в котором камера смотрит вверх.
2. Что значит "требуется линия-сноска с описанием"? Это текст с описанием на самой картинке?
3. Вы сможете указать конкретный перечень того, что должно быть на каждом фото? Я имею в виду, список деталей потолка, которые должны быть представлены.
4. Цена зависит от того, сколько всё таки фото вам необходимо 2 или 3.
Сложность и проработку изображения, готова обсудить, в особенности, размер изображения. Нужно показать весь интерьер или часть комнаты с потолком?
Я работаю в программе 3Ds max Corona render.
С удовольствием разработаю для вас несколько современных интерьеров.
Если у вас есть дополнительные вопросы, пожалуйста напишите мне в личные сообщения.
Суважением,
Виктория.
Budget: 1000 UAH Deadline: 3 days
Здраствуйте! Готова выполнить ваш заказ. Обращайтесь. Behance
Budget: 1500 UAH Deadline: 2 days
Добрый день Дмитрий. Могу Вам помочь. Цену и сроки могу подсчитать после уточнения задания/полного тз.
Мои похожие работы -
1. Behance
2. https://bodyaarchdiz.wixsite.com/archidizer/3d-modeling-beds-in-interiors
Мое портфолио-
1. Behance
2. http://bodyaarchdiz.wixsite.com/archidizer/portfolio-a54kh
С уважением
Богдан
Budget: 1500 UAH Deadline: 7 days
Добрый день
Примеры моих работ подобных заказов( для сайтов дверей и панелей): Google Drive
Budget: 3000 UAH Deadline: 3 days
Обращайтесь , сделаю и высокого качества и высокого разрешения тоже)
Budget: 2700 UAH Deadline: 14 days
Здравствуйте!Есть много готовых сцен с такими решениями а также те куда можно вписать такой потолок. Стоимость зависит от количества нужных картинок!
Обращайтесь)
Больше работ тут https://www.instagram.com/p/CGDq6bYH0n5/?igshid=i9i8rqdcn83
Budget: 2999 UAH Deadline: 3 days
+
Freelancehunt
сделаю "красивую" картинку
Budget: 2800 UAH Deadline: 3 days
Добрый вечер!!
Я так же из Харькова.
Сделаю быстро и качественно. Я сам использую у себя в проектах текстуру натяжного потолка
Примеры моих работ можно увидеть
Instagram: https://www.instagram.com/lozovoydesign_ua/
Facebook: https://www.facebook.com/lozovoydesign
Готов подъехать к Вам и в офис
Стоимость 100 долл
Предоплата 50%
Looking for a 3D modeler,制作3D模型儿童游乐场用木材,根据图纸,进行调整。
Use the existing model as a basis (I will send it to the performer). Do not change the folding mechanism, hinge, dimensions, or overall structure. The following modifications need to be made:1. Front Supports (horns) Replace the existing short supports with more modern curved horns. The horns should start slightly higher vertically relative to the current model. Keep the overall length of the horns compact (do not make them longer). Only the position relative to the base is changed. This seating should provide more free space under the bottom of the phone for connecting the charging cable without strong bending. All transitions should be smooth, without sharp angles.2. Design Update Give the product a more modern minimalist appearance in the style of Apple (Soft Minimalism). Requirements: increase the radii of rounding throughout the product; remove the feeling of "squareness"; make the transitions between all elements smoother; round the edges and outer edges of the base; maintain a simple minimalist appearance without decorative elements and textures. The product should look like a solid cast premium-level accessory.3. Logo On the inner side of the upper back, create an embossed inscription: Metalandbrassco Requirements: font Franklin Gothic Demi; the inscription should be centered on the back; make it as an indentation (engraved), not raised; depth of indentation — about 0.5–0.8 mm; letters should have sufficient thickness for quality FDM printing.4. Printing Requirements The model should be printed without supports. Do not create new overhanging elements. Maintain the strength of the structure and the existing angle adjustment mechanism. All changes must be adapted for FDM printing (PLA/PETG, 0.4 mm nozzle).What to Provide Source file (Fusion 360 / SolidWorks / Onshape or other parametric CAD). STL. STEP. All dimensions must be parametric for further editing. A few days will also be needed for test printing before closing the project.
A new version of the existing corner modular shelf for storage needs to be developed. The provided model can be used as a basis (I will send the model to the performer), but the design and construction should be changed according to the requirements below. General Concept The shelf is intended for installation in the corner of a room and should be modular. Several identical modules are installed on top of each other and securely fixed together. The main style is modern minimalism with smooth lines and large rounding radii. Dimensions Size on each side adjacent to the wall: 230 mm Height of one module: 100 mm The wall thickness should be optimized for FDM printing (approximately 2.5–3 mm).Front Part The front edge should be significantly lower than in the original model. Goal: to ensure free access to the contents; the user should be able to reach items even from the bottom shelf without removing the upper modules. The front cut should be made with a smooth arc. No sharp corners.Side and Back Walls The height of the side and back walls should remain almost full. All outer corners should have large roundings. Module Connection A hidden connection system needs to be implemented. It is currently visible. On top of each module: guides/mounting holes. On the bottom: matching pins. After installation, the module should: automatically center; not shift sideways; not rotate. The connection should be as inconspicuous as possible from the outside.Internal Part The bottom should remain flat. No partitions should be made inside for now (there is a visualization of the concept attached). (Partitions will be a separate task later.) Construction The model must be fully suitable for FDM printing. Mandatory: no supports; no overhanging elements; no complex bridges; no separate parts. The shelf should be printed as a single piece.Design No decorative textures should be used. Surfaces should be smooth. Large smooth radii are welcome. The shape should look modern and premium.What to Provide Source file (Fusion 360 / SolidWorks / Onshape or other parametric CAD). STL. STEP. All dimensions should be parametric for further editing.
A 3D model of the top part of a stove is needed, which has patterns. It consists of 8 identical segments, so only 1 segment is required, as shown in the picture below.
Visualization of a commercial property with adjacent territory and parking, a standalone café, and a large retail store. And an adjacent area for car sales.