WIFI 10km
45 USD The list of equipment will be purchased on the recommendation of the execution.
There is no access to the internet.
Supply system 5-12v.
We need a specialist, Mr. Dnepr.
The list of equipment will be purchased on the recommendation of the execution.
There is no access to the internet.
The transmitter (router, amplifier and antenna) will be attached to the device.
The receiver - the ordinary tablet can be at a distance of about 10km.
Supply system 5-12v. from the ACB placed on the device.
We need a specialist, Mr. Dnepr.
Нужно настроить передачу данных (видео и управляющие команды) на дистанцию 10+км.
Список оборудования будет приобретен по рекомендации исполнителя.
Доступ к интернету отсутствует.
Передатчик (роутер, усилитель и антена) будет крепится к устройству .
Приёмник - обычный планшет может находиться на дистанции около 10км.
Питание системы 5-12v. , От АКБ размещенных на устройстве.
Специалист нужен а г. Днепр.
-
1 day56 USD
3931 112 6 1 1 day56 USD
Video signal transmission system:
FPV system: For example, Fat Shark Dominator V3 FPV Goggles in combination with Fat Shark 5.8 GHz video signal transmitter.
Video signal transmission system for drones: For example, DJI FPV Air Unit and DJI FPV Goggles.
System of wireless radio control:
FrSky Taranis X9D Plus SE 2019: Controller up to 10+ km.
FlySky FS-i6X: A more affordable version of the controller with sufficient distance.
The antenna:
…
Antenna for the video signal transmitter: For example, Foxeer Lollipop or TBS Triumph.
Export antenna for the radio control system: For example, FrSky X4R-SB or FlySky FS-A8S.
Battery and charging equipment:
LiPo (Lithium Polymer) batteries: For example, 3S (11.1 V) or 4S (14.8 V) batteries with a capacity that meets your equipment requirements.
LiPo battery charging: For example, ISDT Q6 Pro or SkyRC S65.
Current freelance projects in the category Embedded Systems & Microcontrollers
Schematic and PCB design
89 USD
It is a simple fan controller schematic. I will provide a hand-drawn sketch of the schematic. You need to create the schematic in KiCad and implement the PCB design. Add the implementation of a small Buck converter to the schematic. Details will be discussed further along the… Embedded Systems & Microcontrollers, Drawings & Diagrams ∙ 8 hours 44 minutes back ∙ 3 proposals |
Telegram
164 USD
I am offering a job to restore access to a Telegram account. My Telegram account has been hacked, so I am looking for a specialist who can help solve this problem and restore access to the account. I am open to considering your proposals regarding the cost of services.… Embedded Systems & Microcontrollers, Apps for iOS (iPhone and iPad) ∙ 14 hours 22 minutes back ∙ 6 proposals |
STM32H743 + Ethernet (OpenH743I-C DevBoard)
For the DevBoard OpenH743I-C (https://arduino.ua/prod6139-plata-rozrobnika-openh743i-c-standard-stm32h7-development-board ) and the ETHERNET module based on the DP83848 chip, generate firmware to test the operation of the Ethernet module at the hardware level. Examples of the… Embedded Systems & Microcontrollers ∙ 8 days 4 hours back ∙ 5 proposals |
Development of a GPS-GSM tracker
112 USD
Hello! A GPS-GSM tracker needs to be developed. The device should be small in size. The operating range is 6-32V. It should have a built-in battery that allows it to operate for 3-4 hours without external power. The main task is location tracking. The device should have: - a… Embedded Systems & Microcontrollers, Engineering ∙ 9 days 10 hours back ∙ 2 proposals |
Need to exit Android watch from cyclical fastboot.The Mobvoi Ticwatch 3 pro GPS watch entered a cyclic fastboot mode during a firmware flashing attempt. I am looking for someone who can fix it and determine if it is possible to install the firmware. Embedded Systems & Microcontrollers ∙ 9 days 10 hours back ∙ 2 proposals |
Dnepr