Budget: 15000 UAH Deadline: 10 days
Good day. I have experience in similar projects and have various options for the form of construction. I can complete this project with visualization in SketchUP and all specified calculations in SolidWorks.
A carport project is required with a utility block made of profile pipe, calculated for snow load on the roof. The dimensions of the carport are 6x6 m on 4 supports, covered with profiled sheet. The dimensions of the utility block
are 7x3.5 m.
Budget: 15000 UAH Deadline: 10 days
Good day. I have experience in similar projects and have various options for the form of construction. I can complete this project with visualization in SketchUP and all specified calculations in SolidWorks.
Budget: 5000 UAH Deadline: 20 days
Good day! I have been working as an engineer for 9 years. I have experience in designing car canopies. I look forward to collaborating, thank you.
Budget: 5000 UAH Deadline: 14 days
Hello! 😊
I am a design engineer with experience in designing metal structures. I am ready to execute a project for a carport with a utility block, taking into account all necessary parameters:
✔️ Structural calculation of the carport 6×6 m on 4 supports made of profile pipe with a roof made of profiled sheeting.
✔️ Design of the utility block 7×3.5 m.
✔️ Calculation of snow load according to your region.
✔️ Selection of the optimal cross-section of the profile pipe for the reliability of the structure.
✔️ Drawings and diagrams for convenient installation.
I am ready to discuss details, deadlines, and costs. Please specify the construction region. I would be happy to collaborate! 😊
Budget: 3000 UAH Deadline: 10 days
Good day. I will carry out the project with calculations for all types of loads, based on sketches and the project.
Budget: 25000 UAH Deadline: 11 days
I will complete the project of a canopy with a utility block. I perform the calculation of structural elements with the selection of minimally acceptable sections using specialized calculation software, drawings in AutoCAD. The cost and deadline will be established after reviewing the assignment.
Budget: 26000 UAH Deadline: 30 days
Roman, I greet you, my name is Mykola Bohdanovych, I am a certified architect since 2009. I have been engaged in the development of urban planning, architectural, and structural solutions for my projects for 14 years. Here are examples of a project I completed --
https://www.instagram.com/p/CoLkyUfKiIu/?igsh=emIwM2NqMWFoMHZy
I will design a utility building with a carport.
From you, I need the following initial data: topographic and geodetic survey at a scale of 1:500; cadastral number and site plan, and an extract from the cadastre, geolocation; photo and video documentation of the site from different angles so that the site and the area adjacent to the site boundaries at least 15 meters in all directions are visible; links to buildings you liked; a list of wishes and requirements for the building with the carport - car model and its dimensions; a list and functions of the rooms, color of materials, texture of walls, roofing, windows, and doors, other wishes.
The cost of development is $10/m2 of the total area of all rooms of the building for such drawings: site development scheme; building plan with carport; facades; roof plan; section. Payment in parts: 40% deposit - 30% - 30%, funds are non-refundable if you decide to stop the work, you will receive the finished drawings after full payment, during the work you will receive reels to see that the work is being done and payments can be made. A contract will be concluded, and an acceptance certificate will be issued. For your building with a carport, the cost of such a set of drawings will be 26 thousand hryvnias. The development period is from 30 days, final deadlines, scope of work, and price after discussion. Please contact me.
Budget: 15000 UAH Deadline: 14 days
Good day. I am ready to complete your task. I will create visualizations and all necessary drawings of your canopy with the utility block. Freelancehunt
Budget: 4500 UAH Deadline: 10 days
Good day, I can perform the calculation and drawing, examples of similar works in the profile. The deadline and price after discussion.
A set of documentation is required to perform construction and installation works without the contractor independently making design decisions regarding: planning; height; foundations; retaining walls; entrance group; openings; embedded; engineering network passages; drainage. Based on the ENZ in .DWG format, topographic survey, and general plan. The task is to create an author's planning and height solution so that builders receive a clear set of drawings for earthworks, foundation, and monolithic works that form the basement, retaining walls, entrance group, and surface drainage systems. The work does not include the design of the metal frame of the canopy, the roof of the canopy, and KM/KMD — embedded parts, reinforced belts, etc. Heights, dimensions, and locations of their placement need to be shown. Separate complete engineering sections for HVAC, plumbing, and electrical systems are also not included, but the locations of passages and connections for these networks, channels, and technical openings need to be shown. A set of DWG + PDF is needed, sufficient for performing the work without additional solutions on the construction site. Important: the technical task (TT) is the main document that defines the subject, scope, requirements, and conditions for performing the work. All agreements, criteria for evaluating the result, scope of work, and resolution of disputed issues are carried out based on the approved TT.
Job essence: There is a sketch project of a one-story house (140 sq.m) in pdf. The wall technology (frame) has been chosen and the dimensions have been changed. The layout of non-load-bearing walls has been modified in SketchUp. The layout and concept have been approved. A professional draftsman is required to transfer the project to AutoCAD (2D) with "clean" lines from scratch, correct geometric inaccuracies, and prepare drawings for builders. Important subtask (Normalization of dimensions): The project in SketchUp was created during the creative stage, so there are inaccuracies (for example, cabinets 603 mm, openings 815 mm). The contractor needs to independently round and normalize all dimensions according to construction and furniture standards (door openings strictly according to the specifications, kitchen bases 600/450/300 mm, walls without random distortions in millimeters). What needs to be done in the First (basic) version of the project: 1. Wall layout plan without furniture (there will be a frame): taking into account the thickness of the "layers" of the walls (data will be provided). Clear dimension chains (axes, openings, piers). 2. Plan with furniture and plumbing arrangement: all furniture and plumbing must be placed on a separate layer so that they can be turned off with one button. Furniture should be tied to standard dimensions. 3. Foundation plan (top view) with embedded sewerage: executive sheet for builders. Accurate linear ties (coordinates) of the sewer pipe outlets and embedded sleeves relative to the corners of the foundation/axes. Payment and stage conditions (Important!): Stage 1 (Fixed price): Creation of a basic clean version of DWG from my source materials with normalization of dimensions (as described above). Stage 2 (Time & Material / Hourly payment): After the delivery of a quality first version, adjustments to the layout may be made according to my new requests. These corrections will be paid separately at an agreed hourly rate or for fixed packages of revisions. Please indicate two prices in your response: the cost of the First stage and your hourly rate (or the cost of one round of revisions) for the Second stage. What I provide: 1. Plan in pdf with dimensions of the house and rooms before modifications 2. Link to the SketchUp project or export of this file. 3. Thicknesses and materials of the walls. Standards for rounding (what openings are needed for doors, thickness of kitchen countertops, etc.). Technical requirements for DWG: AutoCAD version no higher than 2018/2020. Drafting strictly in "Model" at a scale of 1:1. Ideal layer hygiene: axes, walls, dimensions, furniture, text - all on strictly separate and clearly named layers. No garbage or broken blocks.
It is necessary to carry out architectural and construction solutions, which will include: 1. Replace the windows of the boiler room; 2. Foundations for equipment; 3. Floor in the boiler room: new screed, tiles; 4. Divide the boiler room into two rooms, execute the foundation and wall; 5. Finish the walls and ceiling. The building model is in Revit.
Make a project for the reconstruction of a summer house. Currently, there is a small cold house. I want to add a room. Redesign the second floor. Insulate and install heating distribution. There is gas available.
A design project for a kitchen is needed, around 20 square meters based on the provided dimensions and several generations for better understanding of the layout of the main elements. Please include an example of kitchen design projects in your proposal to understand what you have worked on, along with an estimate and timeline.