Detailed drawing and 3D visualization

Technical task: Development of design documentation (DD) for thermoboxes (insectariums) Goal: To develop drawings for the production of two types of dismountable thermoboxes made of matte stainless steel for further export. GENERAL DESIGN, LOGISTICS AND QUALITY REQUIREMENTS • Operating conditions: Working temperature inside — 30°C, humidity — up to 80%. The design must be resistant to stable heating and high humidity, ensuring the tightness of joints. • Material: Stainless steel AISI 304, surface — matte. • Hygiene and smoothness: The inner surface must be as smooth as possible. Minimize the protrusion of nuts, ends of threads, or any fastening elements inside the structure. * Task for the designer: Propose fastening options (embedded parts, hidden connections, etc.) so that the inner walls are even. • Quality and appearance: Professional "commercial" appearance, absence of any gaps after assembly. • Export orientation: Assembly should be as intuitive as possible for the end user (export version). • Walls: "Sandwich" (matte stainless steel AISI 304 + basalt wool 50 mm). The thickness of the metal for the frame and cladding must be agreed upon with me. • Assembly: Easy to assemble, non-welded, with bolts (stainless steel A2/A4). • Dimensions and logistics: The basic size of the filler plates is 1000 x 600 mm. The basic dimensions of the products can be adjusted only with my approval (the customer). • Equipment and options: Legs 30 mm, lamp mounts, IR film mounts, seating places for internal racks/supports. Cable passages: Sealed, for leading wires outside. Bar for the shield. • Protective mesh: All ventilation openings are protected by stainless mesh (cell 0.8 mm, wire 0.5 mm), fixed with pressure plates without holes in the mesh itself. PRODUCT №1: Vertical box (2000 x 1200 x 800 mm) • Door construction: Double-leaf across the entire width of the facade (1200 mm), trims, rubber seal. Viewing window: Double-layer on one of the leaves, height 500 mm, pressure frames (2–5 mm). Additional "vent" at the bottom of one of the leaves. Locking — mechanical latch. • Ventilation: ◦ Lower intake: 2 openings (left and right), size 400 x 100 mm each, with dampers. ◦ Upper exhaust: Mounting place for a fan 120x120 mm on flange (M4 fastening, center distance 105 mm). The size of the opening in the "sandwich" — 200 x 200 mm. Provide for an adjustable damper. PRODUCT №2: Small box (900 x 600 x 600 mm) • Construction: Side doors across the entire panel, trims, rubber seal. Inside — removable/adjustable shelves. • Ventilation: ◦ Intake: 2 openings on the sides of 400 x 100 mm each, with dampers. ◦ Top: Mounting place for a fan 120x120 mm on flange (M4 fastening, 105 mm), opening in the "sandwich" — 200 x 200 mm. Provide for an adjustable damper. TASK FOR THE DESIGNER: Propose optimal fastening nodes, sealed passages, and a frame design without welding. Be sure to propose design options that minimize the protrusion of any fastening elements (nuts, threads) into the internal space. The goal is a reliable, sealed structure without gaps, with a professional "commercial" appearance. REQUIRED RESULT: 1. 3D models (STEP / SolidWorks) + interactive assembly (Autodesk Viewer). 2. Drawings of parts and nodes (connection diagrams, fastening of nets/glass/lights/IR film). 3. Unfoldings (DXF) taking into account bending coefficients. 4. Specification for stainless fasteners. 5. Proposals for design solutions, timelines, and costs.

Development of a mechanism for alternating the flipping of plastic cupsProject Goal It is necessary to develop only the mechanism for flipping plastic cups "every other one" for an automatic production line. The device must ensure the following sequence: 1st cup — without flipping (0°) 2nd cup — flip 180° 3rd — without flipping 4th — flip 180° and so on. As a result, the output should produce the sequence: 0° → 180° → 0° → 180° → ...What is already available The cups move along the conveyor in a single row. Before the mechanism, all cups have the same orientation (lid up). Only the flipping unit needs to be developed.Proposed Operating Principle The following scheme is considered: A dividing screw synchronizes the flow of cups. All cups gradually rotate to the position of 90°. Then, the cam mechanism acts only on every second cup. Every second cup returns from the position of 90° back to 0°. The others continue rotating to 180°. As a result, we get: 0° 180° 0° 180° If the performer offers a simpler, more reliable, or more technological solution — we are ready to consider it.Requirements1. Develop a complete 3D model in SolidWorks It is necessary to model: dividing screw; flipping mechanism; cams; guides; shafts; mountings; all necessary parts.2. Perform kinematic verification It is necessary to ensure that: the mechanism operates without jamming; there are no intersections of parts; the cups are flipped correctly; the mechanism is suitable for manufacturing.3. Conduct Simulation / Motion Study It is necessary to perform an animation of the mechanism's operation in SolidWorks Motion. It should be visible: the movement of the cups; the rotation of parts; the sequence of flipping every second cup.Work Result The performer must provide: source files SolidWorks (*.SLDPRT, *.SLDASM); assembly; Motion Study; animation video; STEP file of the assembly; drawings of the main parts.

Project Description:I am looking for an electronics engineer for a paid technical consultation on repairing network equipment.Problem Summary:There is a 4-channel GSM-VoIP gateway GoIP4. The device has started to go into a cyclic reboot (the relays click every 2 minutes, it does not accept calls, and it resets authorization).What has already been checked:The power supply has been replaced with a known working one (12V/2A) — the problem persists.SIM cards have been removed and checked — the symptoms are the same without them.The problem is 99% likely to be in the hardware (internal power circuit on the board, degraded capacitors, or a burnt-out DC-DC converter).What is required from the contractor:Consult on typical issues with this board and suggest which power circuit elements should be checked first with such symptoms.Important: If you are located in Cherkasy (or are willing to accept the board via Nova Poshta), we can arrange for physical diagnostics and re-soldering of components as part of this project.Please respond if you have experience in component-level repair of motherboards, routers, or similar telecommunications equipment.

Task: create a prototype adapter that will allow the use of tool brand A on video processor brand B. There are two brands of endoscopes (camera on a flexible tube), let's call them brand A and brand B. Each system consists of a video processing unit (video processor) and a working tool that has a CMOS sensor installed. The analog signal from the CMOS goes through wires via its own connector (each brand has its own) into the video processor, then the video is transmitted to the monitor via HDMI. Hypothesis 1. Both endoscopes use the same CMOS. We know for sure that model A uses the OV6946 sensor (https://www.ovt.com/products/ov6946/). Visually, sensor B looks similar to sensor A. Hypothesis 2. It is possible that video processor B has a different polling or synchronization protocol. Hypothesis 3. Initial experiments with simple "color-coded" wire connections did not yield results. Therefore, it may be necessary to develop a matching board. What we provide: working tools A and B (2 pieces each, can be disassembled). Video processor B (can be carefully opened). Connectors A and B. Video processor A - under question. Requirements: experience with CMOS, signal analysis using an oscilloscope, development of signal processing circuits, assembly under a microscope (the conductors are very thin, have a shield and a central core). The image quality should not noticeably suffer! The prototype must be reliably assembled and suitable for transportation. Result: working prototype on a breadboard, documentation (circuit, description). Deadline from the moment of receiving materials: 2-3 weeks Propose a cost.

Need a contractor for the development of UAV avionics of aircraft type We are looking for a specialist or team to develop the electrical schematic and prepare the equipment specifications for UAVs of aircraft type. Scope of work: development of the principle electrical schematic of the onboard system; selection and specification of all electronic components and equipment; description of connections and interfaces between components; preparation of a set of technical documentation. Requirements for the performer: experience in developing electronic systems for UAVs or robotic complexes; knowledge of modern component base and electronic design tools; experience in preparing technical documentation. Please send information about relevant experience, examples of completed projects (if possible), and estimated timelines and costs for the work.