A graphic designer is needed.

BRIEF FOR NAVIGATION CHILDREN'S HOSPITAL

1. Initial Data

• Basis: architectural drawings of the premises.

 • Task:

• Raise the walls according to the drawings and create wall elevations.

• Indicate the boundaries of the walls with a dashed line on the elevations.

• Do not display the drawing in door and window openings.

⸻

2. Color Palette

Use the following basic RAL colors:

• RAL 3012 - pink-beige

• RAL 5024 - pastel blue

• RAL 3017 - coral-pink

• RAL 6021 - light green

Additionally, select 4 more companions (in pastel shades, tone-consistent).

All colors must be specified in RAL and HEX.

⸻

3. Floor Navigation

• Material: self-adhesive film ORACAL Floor Graphic Film (or equivalent).

• Lamination: anti-slip Oraguard 250 or similar.

• The film is applied over the tiles.

 • Colored lines indicate routes to the wards and offices.

• Each group of wards has its own route color.

 • At turns - arrows and pictograms.

 • In front of each ward - a colored square or marker of the corresponding route color.

⸻

4. Navigation and Signs on Walls

4.1. Ward Number

• Located next to the door on the wall.

• Shape: rectangular sign made of HPL. Size????

 • On the sign:

 • ward number;

• Braille font (raised dots).

• Material of numbers: PVC, height of numbers - 20–25 cm.

• Height of sign placement (center): at a level of 120–130 cm from the floor, which corresponds to ergonomics for children and adults.

• Braille is applied to the lower part of the sign, height of raised dots - 0.5–0.6 mm, diameter of dot - 1.5 mm (standard DIN 32976).

4.2. Upper Sign Above the Door

• Shape: rectangular across the width of the door (will it be PVC or HPL?)

• Material: acrylic with backlighting along the upper perimeter (LED strip).

 • On the sign - ward number (the same font and color as on the wall).

4.3. Side Sign

• Located perpendicular to the wall, protruding.

• Shape: rectangular.

• Material: acrylic / PVC.

 • It duplicates the ward number.

⸻

5. Backlighting of Signs

Light signs (LED backlighting) to be installed for the following premises:

 • Reception Department

 • Manipulation Room

 • Procedure Room

 • X-ray

 • Operating Room

 • Intensive Care

 • Laboratory

 • Exit / evacuation doors

⸻

6. Additional Elements

• A decorative composition of large PVC elements is planned on one of the walls (according to the provided photo example).

 • Elements are flush-mounted

 • Color logic - within the main palette.

In the main theme, there are graphic characters that correspond to the colors of the lines leading to the wards.

⸻

7. Output Format

• Working files: .CDR (CorelDRAW).

• Export: PDF + JPG/PNG for approval.

• All colors - in RAL + HEX.

 • On each sheet - zone labels and color designations.