Apparatus for school self-activity lessons
16 USD (I'm ready to hear your recommendations - correction)
You need to design and eventually collect a device for the demonstration of the lifting mechanics and "there's something else..." From the artist I only expect a project in drawings for production. But if there are suggestions on the collection, it is ready to hear.
The essence =
Two disks located in one flat should rotate.
The first disk is connected to the electric motor.
The disks must be touched and pressed to each other with a minimum pressure.
- the disks are hardly attached to the vals = (the vals are turned and the disks are attached to it)
The shelves must be electrically isolated from each other.
What is:
Wave for 3D printers 8mm diameter and 50mm length
lifts for vals diameter 8mm 4st
2 disks with a diameter of 120 mm and a thickness of 5 mm.
In the applied files my example of how this device may look. I hope you offer me a more compact and simple design.
Applications 2
Client's review of cooperation with Arkady Kolesnichenko
Apparatus for school self-activity lessonsOk to. The task is fulfilled.
It was good and good, quality satisfied.
Freelancer's review of cooperation with Sergey Silasveta
Apparatus for school self-activity lessonsGood customer, it's nice to have a deal with him =)
-
Winning proposal10 days16 USD
554 16 0 1 Winning proposal10 days16 USD
Good Morning Sergey
Ready to help with this task. Please contact me to agree on the project. There is an idea of how to make it more compact.
-
30 days33 USD
4419 71 0 2 30 days33 USD
You can try to work on this project. Conversation of the design in the process through the 3D model.
Budget and deadlines are discussed.
Current freelance projects in the category Object Design
Retouching / smoothing of the 3D model (STL) and preparation of vectors for CNC millingA one-time task is needed for cleaning and optimizing graphics for further CNC milling. We have a raw "dirty" STL file (obtained through automatic image tracing) with a lot of pixel noise and irregularities. The program you work in does not matter (Blender, ZBrush, Fusion 360,… 3D Modeling, Object Design ∙ 2 hours 52 minutes back ∙ 8 proposals |
Creation of a 3D model from an image.
Technical assignment: It is necessary to develop a 3D model of a trade structure in the shape of a cartoon pig for subsequent manufacturing of a master model from polystyrene (CNC milling); puttying and finishing of the master model; matrix removal; serial production of… 3D Modeling, Object Design ∙ 3 hours 58 minutes back ∙ 8 proposals |
Project of a transition plate for the installation of a bearing and shaft for a single-support generator.For a single-support generator, a project for a transition plate is required for the installation of a second bearing and a project for extending the shaft for the installation of a pulley. The diameter of the shaft is 35 mm The extension of the shaft is 150 mm Object Design, Drawings & Diagrams ∙ 18 hours 49 minutes back ∙ 2 proposals |
Designing parts (pads for a bag for 3D printing)
22 USD
A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 3 days 23 hours back ∙ 12 proposals |
Self-service vacuum cleaner
223 USD
Design development of a self-service vacuum cleaner for washing There is an old version that needs updating and redesign. A new design is needed Convenience in assembly With the placement of all parts Considering the sizes of the metal Made of stainless steel and additional… Mechanical Engineering & Instrument Making, Object Design ∙ 4 days 5 hours back ∙ 6 proposals |
Kyiv