Product / Industrial Designer for modular shelf for 3D printing

It is necessary to design a beautiful and functional modular bedside shelf for 3D printing on the Bambu Lab P1S.

I am looking for not just a technical CAD modeler, but a person with a sense of design: so that the model looks like a normal finished product, not just a simple set of rectangles.

The essence of the product:

The shelf is to be placed behind the bed. A large tall flat back panel goes between the bed and the wall, after which the bed presses it against the wall. That is, no drilling, no fastening to the wall.

A modular system with 6 main parts needs to be made:

1. Lower starting section

2. Lower middle section

3. Lower end section

4. Upper starting section

5. Upper middle section

6. Upper end section

The middle sections should be repeatable so that I can increase the overall length of the shelf.

Basic dimensions:

- shelf depth: 80 mm

- all parts must fit on the Bambu Lab P1S table: 256×256×256 mm

Design requirements:

- the lower shelf must be an open tray, without windows, holes, and closed cubes

- there must be a solid edge on the side of the bed so that nothing falls onto the bed

- there must also be a solid wall/edge on the side of the wall

- the upper level must be sturdy, with ribs of stiffness or beautiful brackets

- the shape must be neat: chamfers, rounding, normal aesthetics

- preferably minimal supports during printing

- simple connection between modules: tongue-and-groove, dovetail, clips, or another simple solution

- the model must open and check properly in Bambu Studio

Required result:

- STL for each part

- STEP or source file from Fusion 360 / Onshape / SolidWorks

- preferably 3MF with correct orientation of parts for printing

- a short assembly instruction

The cost can be discussed separately