- Projects -
- Rating -
- Rating 245
Budget: 3000 UAH Deadline: 3 days
Hello, ready to complete your order, you have experience in this work. I can also offer the design of electricity, for residential and administrative buildings.
Budget: 4000 UAH Deadline: 6 days
Ready to fulfill your task. It is necessary to specify the large consumers, the type of converters, boiler, air conditioners, steering machines, plate, spoof and can be accessed
Budget: 8000 UAH Deadline: 20 days
Good time of day.
I am an electricity engineer-designer.
I will be happy to cooperate.
Deadlines and prices - after learning about the details of the task.
Budget: 5000 UAH Deadline: 7 days
Good day, I can do, the cost can change depending on the availability of electricity by the system "smart home".
Budget: 15000 UAH Deadline: 15 days
The cost and deadlines are indicated orientatively, requires clarification after the detailed TZ is studied.
“All questions in the face...”
Your face is closed :)
Kirill P.
Winning proposal- Projects 15
- Rating 5.0
- Rating 885
Budget: 1000 UAH Deadline: 10 days
Good night, ready to perform in AutoCAD after clarification:
1 . What does “electricity” mean? Only 220V or all the weak precision networks too?
2nd "Electricity" ordinary or with smart management by design project?
Three Is there or should we be with you? Or do you want to fill out the list?
In general, please send to my address all the source data you have.
The price and deadlines for this stage in the proposal are conditional.
Budget: 4000 UAH Deadline: 3 days
Good day . I was interested in the offer. I have experience working with similar projects, I work as an engineer - designer for more than 5 years. I’m happy to do my job.
Budget: 5000 UAH Deadline: 2 days
Architect-Designer
I offer services on planning solutions and the design of your home and furniture.❤I offer services in the field of reconstruction, restoration, urban construction, creation of the rubber, architectural design of drawings manually and in electronic form, interior design, landscape design and design of the architectural environment, drawing, design of furniture.We offer services such as:
Design - Interior Project
Design of furniture and constructive design of furniture
Landscape Design
Design of cottage
Author supervision
What is included in the full interior project:
1 .A large draw.2ndPlan of dismantling / installation of prey and engineering communications.ThreePlan of functional zone.4 .Plan with the furniture.and 5.Planning of premises with the explanation of premises.6 .Plan of roofs.Cutting on the roofs.7 .The lighting plan.Specification of lighting elements.8 .Planning of lighting on the switch.The 9.Planning of switching and switching.The 10.A plan of seeds with indication of the type of cover.11 of 11.The walls with a plate.12 .nodes and details.13 .Knowledge of the decoration of rooms.14 .The ability to fill the door and window proems.15 .Knowledge of the sources of light.16 .3D visualization of rooms (2-3 types for each room).What is included in the full landscape design project:
1 .Size of drawings.Functional Zone of the General Plan.3D visualization.4 .Plan of the area.The 5th edition of the green.Plan of mounting (with cuts and indications of types of cover).Development of individual small forms.Development and selection of landscape details.
Proposals concealed
Proposals are currently absent
-
Oleg Aleksandrovich
8 December 2021
Разработать проект системы электроснабжения и электроосвещения жилого частного дома в одну стадию
-
Aleksandr Hrichikov 8 December 2021Здравствуйте. Не совсем понятно, какой объем работ требуется выполнить. Монтажная и принципиальная схема это понятно. Но что-то сверху нужно? Проект щитов, документация о том, какой кабель куда, высоты розеток и выключателей и т.д.
Current freelance projects in the category Object Design
Furniture for the laundry room
I'm looking for a furniture designer for a small project. I need to develop furniture for a laundry room in a private house. What is needed: to propose practical furniture layout; to consider the placement of the washing and drying machines; to provide storage spaces for household chemicals, a laundry basket, an ironing board, and other items; to prepare drawings or a scheme for manufacturing the furniture. Available: dimensions of the room; an example of how the furniture should approximately look. Experience in designing built-in furniture (kitchens, wardrobes, etc.) will be an advantage. When responding, please send: examples of similar works; an estimated cost; the completion time. If everything goes well, we plan to establish a long-term collaboration.
It is necessary to design a cabinet with two drawers for the bathroom. White color. The drawers should have soft-close mechanisms. We will assemble it ourselves. The cabinet stands on legs.
Task: Designing an interior magnetic lock with forced retraction of the magnetic slider.Basic analog (reference for dimensions): AGB TouchCritical difference from the analog (Essence of the mechanics):In the original AGB Touch, the slider with the magnet is retracted only by the force of the door's locking/pulling. In the developed lock, it is necessary to implement forced mechanical retraction of the magnetic slider into the housing with a slight pull of the door handle towards oneself.Mechanism operation logic:In the initial position (handle in the initial position), the slider with the neodymium magnet is pushed forward by a built-in spring (towards the strike plate of the frame).When pulling the door handle towards oneself, the internal catch (lever finger) should slightly engage the magnetic slider and forcibly pull it inside the lock housing, completely hiding the magnet in the end.Upon releasing the handle, the return spring returns the magnetic slider to the initial (extended) position.A locking device should be provided to block the movement of the door handle towards oneself. Similar to a WC lock.Output requirements: Assembly in STEP or IGES format, suitable for test 3D printing on an SLA/FDM printer.
Develop for two devices: general assembly drawing of the metal frame; general assembly drawing of the service platforms; detailed drawings of ladders; detailed drawings of railings; detailed drawings of equipment supports; specification of metal products; St3 or 09g2s As a result of the design, it is necessary to obtain: 3D model of the frame. General assembly drawing. Specification of metal products. Calculation of the load-bearing capacity of the structure (will be a plus). Description of the device:ParameterValueType of deviceVertical reactor with a stirrerWorking volume2.0 m³Total volumeabout 2.36 m³Body diameterabout 1500 mmHeight of the deviceabout 4265 mmBody materialSteel with enamel coatingType of stirrerAnchorStirrer rotation frequencyabout 85 rpmHeat carrierThermal oil
Development of a mechanism for alternating the flipping of plastic cupsProject Goal It is necessary to develop only the mechanism for flipping plastic cups "every other one" for an automatic production line. The device must ensure the following sequence: 1st cup — without flipping (0°) 2nd cup — flip 180° 3rd — without flipping 4th — flip 180° and so on. As a result, the output should produce the sequence: 0° → 180° → 0° → 180° → ...What is already available The cups move along the conveyor in a single row. Before the mechanism, all cups have the same orientation (lid up). Only the flipping unit needs to be developed.Proposed Operating Principle The following scheme is considered: A dividing screw synchronizes the flow of cups. All cups gradually rotate to the position of 90°. Then, the cam mechanism acts only on every second cup. Every second cup returns from the position of 90° back to 0°. The others continue rotating to 180°. As a result, we get: 0° 180° 0° 180° If the performer offers a simpler, more reliable, or more technological solution — we are ready to consider it.Requirements1. Develop a complete 3D model in SolidWorks It is necessary to model: dividing screw; flipping mechanism; cams; guides; shafts; mountings; all necessary parts.2. Perform kinematic verification It is necessary to ensure that: the mechanism operates without jamming; there are no intersections of parts; the cups are flipped correctly; the mechanism is suitable for manufacturing.3. Conduct Simulation / Motion Study It is necessary to perform an animation of the mechanism's operation in SolidWorks Motion. It should be visible: the movement of the cups; the rotation of parts; the sequence of flipping every second cup.Work Result The performer must provide: source files SolidWorks (*.SLDPRT, *.SLDASM); assembly; Motion Study; animation video; STEP file of the assembly; drawings of the main parts.