Freelance projects

Freelance projects

3D project of a convertiplane

3D Modeling — incorrectly specified categories?

22 USD

Project translated automatically. Log in or register, to view the original

Technical Task for 3D Prototype of a Tiltrotor

1. General Information about the Project

Project Goal: Creation of an interactive 3D prototype of a tiltrotor with animation of key elements to demonstrate the principles of operation of the aircraft.

Purpose: Visualization of the functionality of the tiltrotor, demonstration of flight modes and mechanical elements.

2. Requirements for the 3D Model

2.1 Geometry and Detailing

Create a 3D model of the tiltrotor based on the attached diagrams and drawings
Detailing: medium (sufficient for demonstrating the structure, but optimized for animation)

3. Requirements for Animation

3.1 Animation #1: Takeoff from the Runway (Airplane Mode)

Duration: 10-15 seconds

Sequence:

The tiltrotor is standing on the runway
The propellers start to spin (gradual acceleration)
The aircraft begins to run along the runway
Lift-off from the ground (angle of attack ~10-15°)
Climb in airplane mode

Technical Parameters:

Propeller rotation speed: gradual increase from 0 to maximum RPM
Movement along the runway: linear acceleration
Landing gear retraction (optional, if the design allows)

3.2 Animation #2: Vertical Takeoff (Helicopter Mode)

Duration: 10-15 seconds

Sequence:

The tiltrotor on the ground, propellers in vertical position (if there is a gondola rotation)
The propellers start to spin
Smooth vertical climb without a run-up
Hovering at a height of 5-10 meters
Optional: transition to horizontal flight (gondola rotation of the rotors)

3.3 Animation #3: Landing

Duration: 10-15 seconds

Options:

Landing like an airplane: descent, leveling, touch down on the runway, rollout
Vertical landing: hovering, smooth vertical descent, touch down on the ground

3.4 Animation #4: Opening the Hatch on the Roof

Duration: 3-5 seconds

Sequence:

The hatch is closed (initial position)
The opening mechanism is activated
The hatch opens (sliding, tilting, or combined mechanism)
The hatch is fully open
Optional: reverse animation of closing

Technical Parameters:

Opening speed: smooth, realistic

Please provide deadlines and pricing. The budget is not final.
If possible, send similar projects.

Proposals 13 Discussions 5

Anna Burda

7 0

Projects 7
Rating -
Rating 634

Budget: 15000 UAH Deadline: 14 days

Good evening, Vladislav!
This is a very complex and interesting project; I would like to create such a convertiplane.
The estimated completion time is 2 weeks. I will do the animation in Cinema 4D, and I will render in Octane for greater realism.
Examples of my work: Freelancehunt

Ihor P.

11 0

Budget: 7000 UAH Deadline: 4 days

Thank you for the detailed project brief — the format is very clear and structured 👌
I am ready to take on the project.

✅ Proposal:

🎨 3D model of a tiltrotor aircraft — medium detail, optimized for smooth animation

🎥 4 animations (takeoff like an airplane, vertical takeoff, landing, opening of the hatch)

📦 Output files: video/render frames + source 3D file (FBX/Blend/Max — to be specified)

🧩 Optional: separate cameras for demonstration (cinematic presentation)

💰 Estimated cost: from 6,500 to 8,500 UAH

(it can be adjusted after clarifying the format of the final result — video or real 3D viewer)

⏱ Deadline: 4–6 days

(I will divide it into stages: model → draft animation → final renders/export)

If convenient — please send:

📌 Schematics/drawings we are basing on

📌 Desired style of presentation (realism or technical demonstration graphics)

📌 Format of the final result (video / interactive / separate animation clips)

🎯 If needed — I can also create a short previz before the final execution, so you can immediately see the direction.

Is this format suitable? 🚀

Vitalii Tretyakov

21 0

Budget: 7800 UAH Deadline: 7 days

Hello! I am ready to collaborate and create a 3D model and animation according to your wishes. Let's discuss the details!

Vadim Chervenyak

23 0

Budget: 14000 UAH Deadline: 10 days

Hello Vladislav!
I am ready to create a model with all the necessary moving elements and produce high-quality animations as per the task.
The final price depends on the style in which the animation is done (it is preferable to provide references).

Leonid Naku

0 0

Projects -
Rating -
Rating 508

Budget: 27000 UAH Deadline: 5 days

The base price of the project is from 2000 to 3000 euros. This is the cost on the condition that the development process will proceed without significant revisions, and the result will be accepted immediately after the completion of the main stages. The estimated completion time is 15–20 days. As practice shows, such projects require numerous approvals, revisions, and clarifications during the work process. Because of this, the actual duration and scope of work may increase by 2–3 times. In this case, the final cost may range from 4000 to 7000 euros, depending on the number and complexity of edits, approvals, and additional tasks. You should at least show some examples regarding the quality of the video, image resolution, etc. — as this also affects the price. It is also important to clarify how many frames per second should be in the final animation.

*Since it is impossible to specify an amount greater than 27,000 UAH on the site, I indicate an estimated price of 27,000 UAH (approximately 550 euros). Accordingly, the completion time is about 5 days.

Volodymyr Bilousko

46 1

Budget: 27000 UAH Deadline: 14 days

✈️ Ready to create a 3D prototype of a tiltrotor with animation!

- 3D model based on your drawings.
- Animations: takeoff, vertical climb, landing, opening hatch.

💰 Cost: $1500.
⏳ Deadline: 10–14 days.

Portfolio:
Freelancehunt
Google Drive

Send the drawings — let's get started! 🚀

Mihaylo P.

18 0

Budget: 27000 UAH Deadline: 12 days

Hello.
3D Specialist and UI/UX Designer with 10+ years of experience.
My background in 3D engineering ensures the logic and technical perfection of designs and prototypes.
Design: UI/UX from scratch (experience in innovative startups), branding.
3D: From complex CAD to digital sculpture. Experience working with aviation industry requirements for maximum accuracy.
Ready for complex, multifaceted tasks that require both creativity and an engineering approach.
Proficient in a wide range of software (Figma, Blender, ZBrush, Photoshop, Illustrator, Rhino, SketchUp, ArtCAM, etc.).

Serhii Zinoviev

2 0

Projects -
Rating -
Rating 319

Budget: 10000 UAH Deadline: 10 days

Hello! I am ready to do the work, write to discuss the details in private messages.

Andrii Biletsky

7 0

Budget: 27000 UAH Deadline: 14 days

Hello.
Examples of work.
https://youtu.be/qCc0rTAHn4Y
https://youtu.be/mpushpsBFh0
https://youtu.be/Z-XpdGP_eyY
https://youtu.be/UJGdZHzLD7Y
https://youtube.com/shorts/OuZFmT2PVi8?feature=share

Approximate price 28,000 UAH.
Deadline 10 - 14 days.

Aleksandr G.

57 0

Budget: 8000 UAH Deadline: 7 days

Good day!
I will create a high-quality detailed 3D model and realistic animations in high resolution.
The deadline is up to 7 days.
Write to me, I will be happy to help!