Calculation of the nodes of the frame house

Good day . I will fulfill your order.
I have experience. Portfolio in the profile.
The cost and time of completion of the task will be finally agreed on the specific TZ

Show original

Translate

1 .It all depends on the type of material and the shape of the straw you will use.(it should be understood that there are general standards for example on the size of the module itself for transportation, roof leaks, height notes other)
The 2ndIt all depends on what you are planning to cover the roof (proflist, metal scrap, bitum can be simply a membrane.)3 .All materials are different and such inserts are difficult to count ( you can put it as a wood material and count it as a wood but this is not quite true because it is a wooden layer with a stick and a different technology can differ, this all leads to weakening and difficulty of placing flexibility modules and mathematical characteristics)The thickness of the insert will be stumbled from the presence of what is on the market.and 4.Specifications are made on a ready module and not on a separate frame.and 5.I recommend you to make them from metal and they will not be affected because above you will still have some type of drainage structures that will break down this "cold place" and will not be touched with the external curves through a profile.If you do it for yourself, it’s okay.If this is a commercial offer and you want to go to the market then I recommend starting with an architect.And then the construction.First the appearance and awareness and then the frame and constructive solutions.

Show original

Translate

Good Morning, Vitaly
Such calculations are not complicated and described in the DBN and manuals from wooden structures. I would like to clarify for which extreme conditions this calculation should be done, taking into account that there are already a lot of solutions ready and even in the cross-building supermarket a similar product is sold both by the immense manufacturers and with China. For example, go to the site Metalvis, to the section of the plate for fixing. There you will find both under the bullet combination / self-cutting as well as the toothpaste for the frame and farm.
With respect, Arthur.

Show original

Translate

I will make a 3D model of possible connections in SolidWorks with the possibility of viewing in eDrawings. After the arrangement of the options, I will conduct a load modeling that will show the effectiveness of the decisions taken.
Final deadlines and cost - after discussing the details of the project (the number of options and time expenditure for each option).

Show original

Translate