Project translated automatically. Log in or register, to view the original You need to make a WiFi router from the raspberry PI that leads to the TOR.On the router there will be N-Call and Node of TOR.The router will through HAProxy balance the connection between all TOR nodes for maximum performance.(Haproxy can only in socks5) (in transparent proxy then translate through redsocks or analogical solution).The Internet connection will go both by cable to the raspbery port and with the 4G modem, which will be a separate interface.The router will only operate on a frequency of 2.4 gHz.It is also necessary to provide for the use of openvpn, as the grain is blocked in Russia and can be blocked in other countries.The router will also have a web interface on the IP address (192.168.1.1 as an example), which will contain the following: - Authorization (it only asks for a password): Following the authorization of the page with the setting: 1) The security of the network The network name (SSID) Type of security / password for the network 2) Router settings - Choosing an adapter from which to stop traffic through TOR to WiFi (whether it is an internet cable, USB modem, or modem as an upgrade over raspberry pi (such as wim on Ali, checked - they work on the debian) Use a balancer and a few TOR nodes: - The field where we indicate the TOR node, between which there will be balance - text field to set the torrc config (to write to the nodes after the main config) (for example, block any page) The DNS settings.Or enter the DNS server itself, or choose from the list.If there is only 1 thorn nodes, it is possible to use the thorn DNS server.If there are several nodes, you need to indicate the IP address DNS manually.Implementation of openvpn Enable openvpn Configuration for openvpn - Password from the config (if available) Download the openvpn log (in case of problems) 4) Safety Change the password to log in to the router.

Proposals 1