Development of code for atiny13
22 USD The button (protection against the scratch is built, pin MK = 2/3)
LED (SIM output, pin MK = 5/6)
Switching (selection of the switching interval)
1 .After initialization, the IC should go into the state of "sna" (consumption < 50uA)
2ndSingle pressure (front 0 -> 1) includes the SIM output with 100% filling.It includes a timer that will turn the IC to point 3 within ~60 minutes with the removed switch or within ~30 minutes with the installed switch.ThreeThe repeated pressure (on the front 0 -> 1) translates the SHIM output to 50% absorption.The timer is removed, which will turn the IC to point 4 within ~60 minutes with the removed switch or within ~30 minutes with the installed.4 .The repeated pressure (on the front 0 -> 1) translates the SHIM output to 20% absorption.The timer is removed, which will turn the IC to point 5 within ~60 minutes with the removed switch or within ~30 minutes with the installed.and 5.Transition to the "sna" mode (consumption < 50uA), generation stop.The IC should be in this state until the button is pressed.6 .The button (front 0 -> 1) is translated to point 2 of this algorithm.Please include the following intervals (multiples or divisors) in the original code to be edited in the future:
1 .Fill (or smoothness) on the first press
2ndFill (or smoothness) of the SIM at the second pressure
ThreeFill (or smoothness) on the third pressure
4 .Time of Timer
and 5.Number of pins for the button, LED, switch.Please check the current consumption in sleep mode and make sure that the device does not have unforeseen switching/output.
Client's review of cooperation with Oleksandr Mymrikov
Development of code for atiny13Everything has been done quality and in time, the result is fully satisfied. In addition, Alexander gave a few advice on the schema engineering of the device and suggested how to do better.
Freelancer's review of cooperation with Aleksandr Pastuhov
Development of code for atiny13All in order, responsible and decent customer.
-
1 day22 USD
498 6 0 1 day22 USD
Good day . I have great experience in programming, including ATtiny13.
Ready to accomplish this task.
The code will be written in the ATmel studio in the language C.
-
5 days22 USD
274 7 2 5 days22 USD
Hello to Alexander. I get acquainted with your project. Ready to accomplish your task. Thank you for attention.
-
Winning proposal1 day22 USD
918 18 1 Winning proposal1 day22 USD
and heal.
I am engaged in the development of key electronics (design of schema -> development/tracking of the print plate -> sample manufacturing -> development of software for IC (plus development of host software for PC/gage if necessary).
at the exit you get a set of documentation for ordering production from Chinese (gerber + pnp + bom + hex), as well as one sample of the gathered iron (on agreement you can not one)
Go to the face, I will show you examples of work.
-
4 days22 USD
408 12 1 4 days22 USD
Hi, I will write the code in the language C for attiny 13 according to your specified algorithm, if there are questions write to LS, we will discuss
-
Здравствуйте, мне ваша задача полностью понята, насчёт по фронту 0-> 1 это значит , что при обычном состоянии когда кнопка не замкнута, не нажата, микроконтроллер получает сигнал 0, то есть 0 вольт, земля, а когда нажимаем кнопку получит 1, то есть 5 вольт, плюс питания??? Просто это не стандартное решение, обычно все делается наоборот с той целью, чтобы использовать внутренние подтягивающий к плюсу питания резисторы, а в вашем случае придется использовать внешние подтягивающий к земле, так как внутренних таковых нет. Это конечно не проблема, просто удобнее чтобы при норм состоянии мк получал 1 , а при нажатии 0.
-
Current freelance projects in the category Embedded Systems & Microcontrollers
Schematic and PCB design
89 USD
It is a simple fan controller schematic. I will provide a hand-drawn sketch of the schematic. You need to create the schematic in KiCad and implement the PCB design. Add the implementation of a small Buck converter to the schematic. Details will be discussed further along the… Embedded Systems & Microcontrollers, Drawings & Diagrams ∙ 5 hours 44 minutes back ∙ 3 proposals |
Telegram
164 USD
I am offering a job to restore access to a Telegram account. My Telegram account has been hacked, so I am looking for a specialist who can help solve this problem and restore access to the account. I am open to considering your proposals regarding the cost of services.… Embedded Systems & Microcontrollers, Apps for iOS (iPhone and iPad) ∙ 11 hours 22 minutes back ∙ 6 proposals |
STM32H743 + Ethernet (OpenH743I-C DevBoard)
For the DevBoard OpenH743I-C (https://arduino.ua/prod6139-plata-rozrobnika-openh743i-c-standard-stm32h7-development-board ) and the ETHERNET module based on the DP83848 chip, generate firmware to test the operation of the Ethernet module at the hardware level. Examples of the… Embedded Systems & Microcontrollers ∙ 8 days 1 hour back ∙ 5 proposals |
Development of a GPS-GSM tracker
112 USD
Hello! A GPS-GSM tracker needs to be developed. The device should be small in size. The operating range is 6-32V. It should have a built-in battery that allows it to operate for 3-4 hours without external power. The main task is location tracking. The device should have: - a… Embedded Systems & Microcontrollers, Engineering ∙ 9 days 7 hours back ∙ 2 proposals |
Need to exit Android watch from cyclical fastboot.The Mobvoi Ticwatch 3 pro GPS watch entered a cyclic fastboot mode during a firmware flashing attempt. I am looking for someone who can fix it and determine if it is possible to install the firmware. Embedded Systems & Microcontrollers ∙ 9 days 7 hours back ∙ 2 proposals |
Odessa