The user is responsible for his work, always in contact. Implementation of directions.
I recommend cooperation.
Budget: 5000 UAH Deadline: 5 days
Hello, I’m ready to get to work.
I work until the full approval (I am about the directions)
I always keep in touch with Skype/Telegram.
Here are examples of work (see also the adaptation)
by photobym.com.ua
by lovalova.com.ua
by primebrand.com.ua
tabletochki.org/ru
super.tabletochki.org/ru
Budget: 100 UAH Deadline: 1 day
10
I can do it on WordPress. Externally, some blocks may be slightly different from the drawn, but in general everything you want will be realised.
The cost and deadlines are agreed.
There are a few examples of work in the profile.
Go to turn.
Budget: 4500 UAH Deadline: 10 days
10
Hello to you.
Adaptive and crossbrowser.
I use Bootstrap + Sass + Gulp.
I have been working on the WP for more than a year, no complaints have been made :)
I react properly, always in contact.
I will be happy to cooperate.
A couple of work on WP and just a spell:
HTTPS://AutoCity69.rf
HTTP://mosgnb.ru
HTTPS://vitya752.github.io/rec
HTTPS://vitya752.github.io/rec/lc_index.html
HTTP://krovlyamontazh.ru
HTTP://smilovar.ru
HTTP://premiumok.ru
Budget: 6500 UAH Deadline: 10 days
10
Good day Dmitry. I am a representative of SomniumGame.
One of the areas of our team’s work is the development of websites. We have been working in this area for more than 2 years. I was interested in your offer, ready to get to work. The cost is 3500 UAH, back-end 3000 UAH.
Budget: 3000 RUB Deadline: 4 days
10
I make a front-end for 3000 rubles. The wire will be adaptive and crossbrowser.
Your site will look good on smartphones, tablets, laptops, stable computers and even on TVs.
The right display in the most popular browsers: Google Chrome, Yandex Browser, Mozilla Firefox, Internet Explorer, Opera, Apple Safari.
Knowledge: HTML5, CSS3, JavaScript, Bootstrap 4, Flex-box, and CssGrid.
My work:
1. http://eldarlebedev.kl.com.ua
2. http://foodfranchise.zzz.com.ua
3. http://ivanhello.kl.com
My contacts:
Posts by @go_Ed_Edy
Instagrame: ed_edy2.0
Phone (whatsapp, viber) : +380950703058
Budget: 9000 UAH Deadline: 10 days
Good morning, I am interested in your project, ready to help, I have a great experience of developing with WordPress. All information about me and work in the profile, please contact me.
Budget: 5000 UAH Deadline: 7 days
10
___________________________
I welcome. Ready to accomplish your task. I realize everything with ready solutions, there is nothing to invent there. Minimum plugins etc. The last work can be downloaded to L.S. Write, I will be happy to collaborate.
Budget: 5000 UAH Deadline: 6 days
I am a front-end/WordPress developer with a experience of more than 3 years, I use a steak
Git, HTML5, CSS3 (c preprocessor Scss, Flexbox), JavaScript (jQuery, plugins);
Based on the methodology of BEM.
Here is my portfolio: Freelancehunt
I do everything according to TZ.
Budget: 2000 UAH Deadline: 3 days
I’ll make it for 2000 UAH in 3 days!
I have experience and ready to cooperate.
Ready to start immediately! Work in Portfolio: Payment by Fact!
• • • • • • •
The advantages:
• • • • • • •
Support of the site throughout its lifetime 24/7 is guaranteed!
Payment on the fact of the work.
I work as a freelancer on a constant basis, there is no other job.
Advice and consultation on the site is free!
• • • • • • •
Contact for communication:
• • • • • • •
by: tsybyte
T/W/V: +380730737228
• • • • • • •
Budget: 7500 UAH Deadline: 6 days
10
Hello to Dmitry!
I am interested in your project!
Ready to make a quality, adaptive, silent, cross-browser layer, optimizing (without loss of quality) for fast charging :)
If desired, I will add an original, non-invasive animation to focus on key moments.
Responsible approach, operational communication, accurate, thoughtful code and compliance with the deadlines guaranteed.
Contact me for cooperation, I will be happy to help!
Budget: 9000 UAH Deadline: 10 days
I propose your project to be implemented on the basis of Joomla or WordPress.
It is possible to adjust the budget and deadlines after discussing the designs and functionality.
A pilot project in a week.
+(38067) 317-50-51 (Viber, Telegram)
Skype by Serglev1408
HTTP://serglev.kiev.ua/portfolio
Budget: 10000 UAH Deadline: 14 days
My name is Denis. I have been working on web design for more than 5 years (there are more than 3 years of site creation), I have been working as a webmaster (site creation) in the web studio "Ollos studio". I am ready to create a quality website for your business.
The price and time will be indicated after the preparation of the TZ.
(There is experience in this field)
0931343868 - Denis (Telegram, Wiber)
by [email protected]
Budget: 4000 UAH Deadline: 6 days
10
Hi, ready to do, remove the fields will be in admin through ACF PRO.
Budget: 3000 UAH Deadline: 7 days
10
Hello Dmitry. Ready to start your project, a period of 7 days, possible and earlier. The price indicated for all together, until the publication on the host. I will also adapt to mobile devices. I will be pleased to cooperate
Budget: 5000 UAH Deadline: 7 days
10
I met with the description. I’m developing websites on WordPress and I’m doing great work that you can get to know in my portfolio. I liked your site and I’m here to implement it. Write to me.
Budget: 9000 UAH Deadline: 5 days
10
Hello to you. I can begin the project today.
Quality clean adaptive layer with sass+gulp, c optimization by google page speed, validation(html5.validator.nu), cross-browsing, setting forms. No bootstrap (with the help of FlexBox and Grid where necessary)
Landing on WordPress on a clean template. Editing content using additional fields (ACF PRO plugin) and additional posts.
Working in the profile portfolio. If necessary, I will provide a more comprehensive portfolio.
turn to
Budget: 3000 UAH Deadline: 5 days
10
Ready to implement the project. I do everything quickly and quality.
Budget: 7000 UAH Deadline: 14 days
10
Good day ! Interested in your project. I have experience with WordPress.
Ready to develop a website. All the work will be done on our server to see the outcome of the work immediately and introduce directions to the project. Please call me, I will be happy to cooperate.
The contacts:
by: mrvlados
Posts Tagged: t.me/vpritulin
Budget: 6000 UAH Deadline: 14 days
10
Hello, and it’s not really a hard bake. Not a big project. Adaptivity will be at the highest level, up to 320 pixels, a flagship with a bum-naivation class without a bootstrap. by @predaytor.
Budget: 3000 UAH Deadline: 7 days
10
Hello, ready to implement your project.I do everything clean and in time.Payment gradually.My Skype live:ramaha1565
Сам редко использую плагины-конструкторы, готового решения нет. Все с нуля. Хороший макет, не хватает как вы заметели страниц "Отзызы", "Блог". Все нужно будет обсудить, есть опыт в этом. Ничего сверхсложного. Все карусели, как и "карусели" выбора времени будут сделаны на плагине owlcarousel. Я так понимаю есть уже указанные временные промежутки, и для каждого дня активные задают в админке. Бюджет и сроки пока не ясны наверняка.
А вы уверены, что вы найдёте прям идеального фулл стек разработчика? Просто вряд ли вам здесь ответят разработчики, которые держат самописные сайты. Лучше найдите фронт енд'чика, он сделает все анимации и тп. Потом этот проект отдаёте бек енд'чику. Итог: получается нормальный сайт.
A business website needs to be developed with several pages (about 5 typical ones). The main page will have around 11 blocks. The niche is "Modular Houses." The work includes: selecting a template deploying and configuring adjusting the necessary blocks and pages (there is currently a rough structure) adding all necessary content considering recommendations from the SEO specialist and contextual marketer The result should be a website ready to launch in advertising. Essentially, this is the work of a web developer + content creator. The performer should be sufficiently proactive, technically skilled, and not just a doer but also a thinker on the project – proposing better solutions along the way, thinking in terms of business results rather than just tasks to be completed. The task is not complicated, and there are no special design requirements. Overall, it should result in a fairly simple yet stylish website. Separately, a rate per hour for content work is needed, as we will further populate the service pages and add articles to the blog. A performer is needed who can handle similar projects on a regular basis. Usually, such tasks come with a request like "I need a small, inexpensive website based on a template" – I think everyone has encountered such clients: the business owner does not have much knowledge about websites and needs to be offered an optimal solution.
We are looking for an experienced Embedded developer to create energy-efficient firmware for a wearable device (form factor: chest strap) for monitoring psychophysiological state. The circuit design is complete, and development will be based on a development kit with subsequent transfer to a custom board.Stack and hardware base:MCU: Nordic Semiconductor nRF52840 or nRF5340.Development environment: nRF Connect SDK / Zephyr RTOS (strictly C/C++).Peripherals:Optical pulse sensor (PPG) — operates via I2C.6-axis inertial sensor (IMU accelerometer + gyroscope) — operates via SPI.Haptic motor driver (LRA 1030) — controlled via PWM.External SPI Flash memory for cyclic logging.Work scope by stagesStage 1: Bring-up, peripheral drivers, and BLE telemetryGoal: Bring the hardware to life, set up stable data collection, and transmit it to a smartphone/PC.Configure I2C and SPI buses using DMA (Direct Memory Access) to offload the processor.Write/integrate drivers for PPG and IMU (configure polling frequency, sensor FIFO buffers).Deploy a custom BLE profile (GATT service) for real-time transmission of raw data from sensors.Basic initialization of PWM for controlling the haptic LRA motor (launch test vibration patterns).Stage 2: Algorithmic layer (DSP and multi-level feedback logic)Goal: Implement mathematical signal processing directly on the chip (Edge Computing) and device reaction logic.Implement algorithms for filtering motion artifacts: clean the PPG signal using accelerometer data (IMU).Extract R-R intervals (HRV) from the cleaned PPG signal.Implement 4-level system stability logic:Drift Level: Track gradual changes in HRV and breathing.Prediction Level: Calculate a mathematical trend for deterioration.Micro-correction Level: Generate barely noticeable haptic patterns on the LRA motor when a target data pattern is detected.Hardware Reset Level: Implement safety logic (high-intensity haptic pulse at critical metrics).Stage 3: Energy saving, logging, and fault toleranceGoal: Prepare the device for autonomous operation from a miniature battery and ensure "24/7" stability.Deep optimization of energy consumption. Put the MCU into sleep mode (System ON/OFF) between measurement cycles. The processor should wake up only on interrupts from sensor FIFO buffers or a timer.Write a fault-tolerant file system in external SPI Flash (e.g., LittleFS) for autonomous cyclic log saving.Configure a hardware watchdog timer to prevent firmware hangs.Requirements for the performer:Experience in commercial development for Nordic chips (nRF52/nRF53) of at least 3 years.Proficient in Zephyr RTOS and debugging tools (Segger Embedded Studio / VS Code, J-Link).Understanding of digital signal filtering principles (DSP) and low-power design.Having your own debugging kit (nRF52840-DK or similar) for starting work is welcome.Work format:Milestone payments with results documented on GitHub. Please indicate your hourly rate or approximate cost and timeline estimates for each of the three stages.
Project Description We are looking for an experienced developer or a small team to create a modern online store for an optical salon. The goal is not just to update the design, but to create an effective online sales tool that will become the main sales channel for the company in the future. The current website is already operational and has an SEO history, so it is important to maintain Google rankings as much as possible during the transition to the new site. We will base the UX and functionality on modern global optical online stores (for example, Warby Parker), but the solutions must be adapted to the Ukrainian market.Required Functionality WordPress + WooCommerce modern responsive design product catalog with filters Mega Menu selection of frames and lenses glasses order builder ability to upload a prescription online appointment for vision check online payment integration with Nova Poshta simple administrative panel product import SEO-friendly structure possibility of further integration of an AI consultantImportant A specialist is needed who has experience in creating online stores, understands UX, SEO, conversion, and can offer their own solutions for improving the project. A detailed technical task will be provided after the preliminary selection of candidates.Please include in your response Links to 3–5 similar implemented online stores. Your experience with WooCommerce. How you plan to maintain SEO during the site transfer. What improvements you recommend to increase conversion. Estimated cost of the project. Estimated completion time.Specialization ✅ Website creation ✅ Online stores and e-commerce ✅ WordPress ✅ WooCommerce ✅ PHP
It is necessary to develop a modern online store for electric, gasoline, and battery tools with a separate B2B platform for partners, dealers, and dropshippers. At this stage, I would like to receive a preliminary estimate of the cost, development timelines, and technology recommendations. (because I have a website on the Horoshop platform)Main Site The following should be provided: a product catalog with categories, brands, filters, and search; product pages with specifications, photos, descriptions, prices, and availability; cart and order checkout; customer personal account; adaptive version for phone, tablet, and computer; SEO settings; the ability to independently add and edit products, categories, pages, and banners; integrations with payment systems, delivery services, CRM, or accounting systems; import and automatic updating of products, prices, and stock.B2B Platform After authorization, the partner should have access to a separate account where they can: see individual or wholesale prices; view current product stock; create and track orders; view order history; see order statuses; view their balance, debts, payments, and settlements; upload invoices, waybills, and other documents; submit requests for returns, warranties, or service; receive notifications about new products, promotions, and price changes. It is preferable to provide different types of partners with varying prices, discounts, credit limits, and working conditions.Administrative Part The administrator should be able to: manage products, prices, and stock; create partners and assign them individual conditions; set personal discounts and limits; view all orders, payments, and debts; generate documents; view sales statistics; manage service, return, and warranty requests; send messages to individual partners or all users of the B2B platform; distribute access rights among employees.Important Requirements The system must be fast, secure, user-friendly, and suitable for further expansion. It is important that most information can be changed through the admin panel without the intervention of a programmer. In your response, please indicate: the estimated cost of development; approximate timelines; recommended technology or CMS; what is included in the cost; which integrations can be implemented; whether you provide further technical support; examples of similar online stores or B2B systems that you have developed. I am considering both a complete development from scratch and implementation on a ready-made CMS with further refinement for the necessary functionality.
Looking for an experienced developer OpenCart / ocStore who can transfer the existing online store to a modern version of the system and make several small improvements. First, an audit of the site is necessary! https://bigbears.com.ua/ Initial Data Active site on ocStore 2.3.0.2.3 The store is operational and accepting orders. It is necessary to maintain the store's functionality. The domain and hosting remain the same.Main Task The site needs to be transferred to the current stable version of OpenCart / ocStore. During the transfer, it is necessary to preserve: all products; categories; manufacturers; photos; attributes; options; SEO URLs; customers; order history; store settings (if possible).Additionally After the transfer, some small improvements need to be made. Currently, they are minor but may be added during the work process. For example: fixing minor bugs; small changes in the admin panel; small changes on the site; module configuration; fixing the display of individual elements.Requirements Experience specifically with OpenCart / ocStore. Preferably, completed projects. Work through a test copy of the site. Make a full backup before starting. Provide a working site without data loss after completion. It is preferable that after the project is completed, the contractor can make small improvements if necessary.What Will Be Provided The contractor will be provided with: FTP access; database access; admin panel access; hosting access if necessary.Please Indicate in Your Response Experience working with OpenCart / ocStore. Which versions you have transferred. Examples of completed projects. Completion time. Cost of work. What difficulties may arise during the transfer.