Divorce of the print pay. Easyed
31 USD The payment must be:
3st – Rally
The tension stabilizer
- Clemm boil with wire compressors for convenient connectivity of the wires.
The scheme is there, but because it is simple (activated up to 10 conclusions of the IC) and we can programmingly flexibly change the designation of the conclusions on the main controller, so we will retreat from the convenience of dispersing the plate and redirect the pins under dispersing.
Client's review of cooperation with freelancer
Divorce of the print pay. EasyedEugene, very detailedly approached the solution of the question, all the wishes studied. The package brought. thank you.
Freelancer's review of cooperation with Ivan Zaharov
Divorce of the print pay. EasyedAlways in contact. provided the information as detailed as possible. I recommend it.
-
20 days33 USD
121 20 days33 USD
I can do it in EasyEDA or in Eagle or SprintLayout. If necessary, order the production.
-
2 days45 USD
97 2 days45 USD
Hello to you. I can make a fee and if you need to order the manufacturing on pcbway.
-
4 days45 USD
408 12 1 4 days45 USD
Hello, I’m interested in your project, I’m ready to discuss it with you. There is experience in the breakdown of plates on the EasyEda service. I will be happy to cooperate.
-
Сколько такая работа стоит хоть примерно? 🙂
-
Current freelance projects in the category Embedded Systems & Microcontrollers
STM32H743 + Ethernet (OpenH743I-C DevBoard)
For the DevBoard OpenH743I-C (https://arduino.ua/prod6139-plata-rozrobnika-openh743i-c-standard-stm32h7-development-board ) and the ETHERNET module based on the DP83848 chip, generate firmware to test the operation of the Ethernet module at the hardware level. Examples of the… Embedded Systems & Microcontrollers ∙ 5 days 4 hours back ∙ 5 proposals |
Development of a GPS-GSM tracker
111 USD
Hello! A GPS-GSM tracker needs to be developed. The device should be small in size. The operating range is 6-32V. It should have a built-in battery that allows it to operate for 3-4 hours without external power. The main task is location tracking. The device should have: - a… Embedded Systems & Microcontrollers, Engineering ∙ 6 days 10 hours back ∙ 2 proposals |
Need to exit Android watch from cyclical fastboot.The Mobvoi Ticwatch 3 pro GPS watch entered a cyclic fastboot mode during a firmware flashing attempt. I am looking for someone who can fix it and determine if it is possible to install the firmware. Embedded Systems & Microcontrollers ∙ 6 days 11 hours back ∙ 2 proposals |
Tuya smart projectFor a Wi-Fi device. Looking for a specialist with Tuya IoT Platform / Tuya Panel Studio experience, working with CBU is a must! Tasks to be completed: Account registration 1. Product configuration in Tuya IoT Platform 2. Configuration of Data Points (DP) 3. Interface development… Embedded Systems & Microcontrollers, Hybrid Mobile Apps ∙ 7 days 7 hours back ∙ 4 proposals |
Software development for Arduino (RF modules 3–7.5 GHz, automatic frequency scanning)It is necessary to develop a system on Arduino for the automatic search of active analog video signals and the automatic tuning of the transmitter to the detected frequency.It is planned to use three separate transceiver modules: 3000–4200 MHz; 4900–6000 MHz; 6100–7500… C & C++, Embedded Systems & Microcontrollers ∙ 8 days 18 hours back ∙ 4 proposals |
Zaporizhzhia