Development of the board and its specifications
Good day. We have a finished product. The manufacturer who previously supplied it to us lost all technical documentation and the person who handled it. We have a working prototype that needs to be roughly copied, and if possible, improved if necessary.
This device receives a GPS signal using a standard GPS antenna, and this signal is converted into pulses by the circuit board. In simple terms, it is a GPS speedometer. It provides signals to a terminal that converts pulses into speed. On average, this device converts about 200-400 pulses per meter.
We can send this product to the developer by mail
Applications 6
-
20 days223 USD
721 6 0 20 days223 USD
Copying is not a problem, but it is preferable to have the board on hand for study under a microscope. As a result of the work, I will provide a complete set of files for production (GBR/BOM and others).
-
18 days345 USD
1184 9 0 18 days345 USD
Good afternoon, if there is a program for the microcontroller, I can repeat one-to-one.
If there is no program, I will do it in the same form factor, but on STM32
Current freelance projects in the category Engineering
Need an engineer for numerical modeling (ANSYS Autodyn / LS-DYNA)We are looking for a specialist to carry out project work on numerical modeling of transient dynamic processes. At the first stage, it is necessary to assess the feasibility of performing calculations, determine the scope of work, and form the project cost. Detailed technical… 3D Modeling, Engineering ∙ 1 hour 54 minutes back ∙ 1 proposal |
Sheet metal cabinet 0.8 mm
22 USD
Design of a Metal Locker CabinetGeneral Information It is necessary to develop a complete set of drawings and a 3D model of the locker cabinet for further production from sheet metal.Dimensions of the Product Height — 2100 mm. Width — 600 mm. Depth — 485 mm.Construction Two… Engineering, Drawings & Diagrams ∙ 3 days 13 hours back ∙ 11 proposals |
I am looking for a design engineer to develop a compact mechanism with electric drive.There is a preliminary concept for the lifting mechanism of a compact product. Since I am not a design engineer, I cannot assess how optimal the chosen scheme is. It is necessary to: evaluate the proposed concept; if it is viable — refine it; if there is a better solution —… Engineering, Object Design ∙ 4 days 8 hours back ∙ 7 proposals |
Lead PCB Designer Needed: 6-Layer HDI/Mixed-Signal Industrial Wearable (Strict IPC Class 3
267 USD
Project Overview: We are finalizing the SHIELD Core V1.2 — a compact (50×40×10 mm) industrial/tactical wearable device. We have a validated engineering architecture, an exploded 3D CAD model, and a finalized component list. We are looking for a senior-level PCB designer who… Engineering, Drawings & Diagrams ∙ 5 days 3 hours back |
Development of a working project for engineering networks of a private house 300 sq.m.
601 USD
Looking for an engineer/company to develop a working project for the engineering networks of a private house in the village of Lisnyky (Kyiv region). Necessary sections of the project: EO (Electricity): power networks, lighting, panels, grounding. HVAC (Heating and… Engineering, Architectural Design ∙ 5 days 14 hours back ∙ 3 proposals |
Kyiv