Testing stand
It is necessary to develop software for the stand and configure the electronic components.
List of components:
- STM32 microcontroller
- Two beam strain gauges (weight up to 20 kg.)
- Two current and voltage sensors of choice (voltage 15-60V, current up to 200A peak, normal test up to 80A)
- Two non-locking buttons to start the test.
- Monitor for configuring test parameters
- Matrix keyboard for configuring test parameters (5 buttons)
- Red/green LEDs, or RGB for result indication
- Buzzer for result indication.
Applications 1
Current freelance projects in the category Embedded Systems & Microcontrollers
STM32H743 + Ethernet (OpenH743I-C DevBoard)
For the DevBoard OpenH743I-C (https://arduino.ua/prod6139-plata-rozrobnika-openh743i-c-standard-stm32h7-development-board ) and the ETHERNET module based on the DP83848 chip, generate firmware to test the operation of the Ethernet module at the hardware level. Examples of the… Embedded Systems & Microcontrollers ∙ 1 day 5 hours back ∙ 4 proposals |
Development of a GPS-GSM tracker
112 USD
Hello! A GPS-GSM tracker needs to be developed. The device should be small in size. The operating range is 6-32V. It should have a built-in battery that allows it to operate for 3-4 hours without external power. The main task is location tracking. The device should have: - a… Embedded Systems & Microcontrollers, Engineering ∙ 2 days 11 hours back ∙ 1 proposal |
Need to exit Android watch from cyclical fastboot.The Mobvoi Ticwatch 3 pro GPS watch entered a cyclic fastboot mode during a firmware flashing attempt. I am looking for someone who can fix it and determine if it is possible to install the firmware. Embedded Systems & Microcontrollers ∙ 2 days 12 hours back ∙ 2 proposals |
Tuya smart projectFor a Wi-Fi device. Looking for a specialist with Tuya IoT Platform / Tuya Panel Studio experience, working with CBU is a must! Tasks to be completed: Account registration 1. Product configuration in Tuya IoT Platform 2. Configuration of Data Points (DP) 3. Interface development… Embedded Systems & Microcontrollers, Hybrid Mobile Apps ∙ 3 days 7 hours back ∙ 4 proposals |
Software development for Arduino (RF modules 3–7.5 GHz, automatic frequency scanning)It is necessary to develop a system on Arduino for the automatic search of active analog video signals and the automatic tuning of the transmitter to the detected frequency.It is planned to use three separate transceiver modules: 3000–4200 MHz; 4900–6000 MHz; 6100–7500… C & C++, Embedded Systems & Microcontrollers ∙ 4 days 19 hours back ∙ 4 proposals |
Kyiv