Control of the engine on STM32
Processor block stm32f103
Low power electric motor
Block of the engine
A scale optical sensor.
You need to write the engine management program on FreeRTOS. Start the engine by a button on the processor block. Stop overload and from the sensor. After overload, the red LED is burned, and the sensor is green.
Client's review of cooperation with Oleksandr Mymrikov
Control of the engine on STM32Everything is done well and quality.
![]()
Freelancer's review of cooperation with client
Control of the engine on STM32Everything is OK.
easy to communicate, technically skilled and adequate customer. The TZ was made clear and clear from the first time.
Exit to contact is operational
-
918 18 1 Hello, you are ready to accomplish this task. I can do it on the modules you have brought, and I can also develop a single-payment solution (with one sample).
The DDA channel of the operational transmission of the rail to Russia is available (with open borders)
Contact the LS.
-
541 9 2 Good day .
I will implement this project with all the requirements. It works with STM32F407.
The transfer of modules will be expensive, so I will do on similar, only purchased from me.
-
128 Hello to you!
Ready to perform.
There is experience in developing under STM32.
I do everything in good quality, taking into account all wishes.
Write, I will be happy to collaborate!
-
Добрый день.
"Нужно смонтировать тестовое устройство на макетке из предоставляемых заказчиком модулей" - нужна сборка модулей или возможна некая их доработка (stm32 требует ~3.3В, а даже маломощные двигатели могут потреблять 12-24В и ток намного больше)?
Если возможно напишите список модулей, что есть у заказчика (можно в приват). -
Current freelance projects in the category Embedded Systems & Microcontrollers
STM32H743 + Ethernet (OpenH743I-C DevBoard)For the DevBoard OpenH743I-C (https://arduino.ua/prod6139-plata-rozrobnika-openh743i-c-standard-stm32h7-development-board ) and the ETHERNET module based on the DP83848 chip, generate firmware to test the operation of the Ethernet module at the hardware level. Examples of the… Embedded Systems & Microcontrollers ∙ 6 days 22 hours back ∙ 5 proposals |
Development of a GPS-GSM tracker
112 USD
Hello! A GPS-GSM tracker needs to be developed. The device should be small in size. The operating range is 6-32V. It should have a built-in battery that allows it to operate for 3-4 hours without external power. The main task is location tracking. The device should have: - a… Embedded Systems & Microcontrollers, Engineering ∙ 8 days 4 hours back ∙ 2 proposals |
Need to exit Android watch from cyclical fastboot.The Mobvoi Ticwatch 3 pro GPS watch entered a cyclic fastboot mode during a firmware flashing attempt. I am looking for someone who can fix it and determine if it is possible to install the firmware. Embedded Systems & Microcontrollers ∙ 8 days 4 hours back ∙ 2 proposals |
Tuya smart projectFor a Wi-Fi device. Looking for a specialist with Tuya IoT Platform / Tuya Panel Studio experience, working with CBU is a must! Tasks to be completed: Account registration 1. Product configuration in Tuya IoT Platform 2. Configuration of Data Points (DP) 3. Interface development… Embedded Systems & Microcontrollers, Hybrid Mobile Apps ∙ 9 days back ∙ 4 proposals |
Software development for Arduino (RF modules 3–7.5 GHz, automatic frequency scanning)It is necessary to develop a system on Arduino for the automatic search of active analog video signals and the automatic tuning of the transmitter to the detected frequency.It is planned to use three separate transceiver modules: 3000–4200 MHz; 4900–6000 MHz; 6100–7500… C & C++, Embedded Systems & Microcontrollers ∙ 10 days 11 hours back ∙ 4 proposals |
