Budget: 1000 UAH Deadline: 1 day
Здравствуйте Павел, готов подключить оплату частями к Вашему проекту. Работаю с Opencart более 6 лет, пишите обсудим.
Необходимо установить модуль сервиса "Онлайн оплата частями" от приват банк на сайт OpenCart
- Принимается как установка и настройка готового решения так и написание с ноля
- Возможно установка на 2 сайта
- Сумма в бюджете за 1 сайт
Budget: 1000 UAH Deadline: 1 day
Здравствуйте Павел, готов подключить оплату частями к Вашему проекту. Работаю с Opencart более 6 лет, пишите обсудим.
Budget: 500 UAH Deadline: 1 day
Добрый день готов выполнить ваше задание. Есть готовые решения
Budget: 1300 UAH Deadline: 4 days
Здравствуйте. Имею большой опыт работы с апи ПриватБанка. Подобные задачи выполнял многократно (смотрите отзывы).
Примеры могу предоставить в личных сообщениях.
Выполню качественно, учту все пожелания.
1 сайт - 1300 грн
2 сайта -2000 грн
Budget: 800 UAH Deadline: 1 day
добрый день!
специализируюсь на opencart.
готов выполнить Ваше задание.
Budget: 600 UAH Deadline: 1 day
обращайтесь
Мое портфолио - Freelancehunt
Мои отзывы - Freelancehunt
Budget: 400 UAH Deadline: 1 day
Здравствуйте.
Имею опыт работы с Opencart. Если нужны отзывы - пишите в ЛС, есть на другой бирже.
Установлю и настрою готовый модуль от Neoseo - Оплата частями через ПриватБанк.
В стоимость включена бесконечная лицензия для модуля на домен и все его субдомены.
Работу сделаю за час.
The goal of the project is to create two devices that will communicate with each other via cable (485). 1) The first device is a metal casing with connectors, it is a switching block with 16 relays + Ebyte-400M2213S which will check for the presence of a signal at specified frequencies. 2) This is a control panel on esp32 mcu2.8 smart display. Its purpose is to control the load and receive data from the switching block about the presence of a signal at specified frequencies. A specialist or specialists are needed who have experience in such work. Circuit design and programming. All technical resources will be provided. We discuss the project, possible changes, etc... and we work.
Development of a Flight Controller for Fixed-Wing UAVs An experienced Embedded Hardware Engineer is needed to develop a flight controller for fixed-wing UAVs. Tasks: develop the electrical schematic; design a multilayer PCB; select the component base; prepare Gerber, BOM, and Pick&Place for mass production. Main requirements: microcontroller STM32H743 or equivalent class; functionality similar to Matek H743-Wing V3 (without copying); compatibility with PX4 or ArduPilot; interfaces: CAN, UART, SPI, I2C, USB, PWM; support for connecting GPS, IMU, barometer, telemetry, and other peripherals; maximum use of components that meet NDAA requirements (without using Chinese components where possible). Mandatory when responding: describe your experience in developing Flight Controllers or other Embedded platforms; provide examples of completed projects; indicate which CAD systems you use (Altium, KiCad, etc.); specify estimated timelines and costs for completion. Preference will be given to contractors with experience in developing electronics for UAVs, robotics, or avionics.
There is a board with esp32, sim800l, mini 560pro 5v. It has two pulse inputs (coin, bill). 1. A 6-pin connector (mdb) needs to be made. 2. Integrate power into the board, it can be replaced with ti, Pololu D24V5F3 6-30V 3.3V / 1.5A, as a choice or integrate the existing module into the board. 3. Replace sim 800l with another module (the pins fit, but differ in places). Gerber files are available, there are no schematics, base jlpcb.