Sergey Didychuk

Embedded Systems & Microcontrollers · C & C++

16 2
54
Go to profile
Motherboard of the wheeled drone
353
Motherboard of the wheeled drone
Embedded Systems & Microcontrollers
A remote-controlled drone delivers mail or goods around the city...
System for monitoring the loading of chemical reagent rods into the well.
303
System for monitoring the loading of chemical reagent rods into the well.
Embedded Systems & Microcontrollers
The main task of the system is to count the unloads (successful, stuck, empty) of reagent rods into the gas well (removal of water from the bottom of the wells using the reagent), maintaining a log of unloads, with the determination of the time and…
System for measuring the flow of chemical reagent by weight method
334
System for measuring the flow of chemical reagent by weight method
Embedded Systems & Microcontrollers
The system doses the supply of liquid reagent into the gas well.
Control system of granulation
1 329
Control system of granulation
Embedded Systems & Microcontrollers
The creation of the ASU of the granulation plant (mast extraction plant). Description of the software for the Siemens Simatic S7-400 controller and the implementation of the SCADA visualization system (WinCC).
Apparatus for Wending Automatic
1 439
Apparatus for Wending Automatic
Embedded Systems & Microcontrollers
The system reads the RFID card, sends a PUT request to the server( via media or WiFi), with a positive response on the balance connects with the automatic controller (MDB) and gives the command to the vacation. receiving feedback - manages to the…
Dmitro

Embedded Systems & Microcontrollers · Engineering

0 0
183
Go to profile
Technical Lead and System Architect for mission-critical embedded and communications infrastructure deployed under real operational field conditions. Scope of work: - Design and deployment of distributed autonomous systems with high-reliability requirements (99.9%+ operational uptime) - Power management system architecture: autonomous operation, battery life optimization, failover logic - Firmware and hardware integration for real-time embedded systems (bare-metal + RTOS-based, C/C++) - Security architecture: cryptographic protocol implementation, authentication systems, encrypted…
Kostiantyn Chernyshov

Embedded Systems & Microcontrollers · Interface Design (UI/UX)

2 2
122
Go to profile
Two-controller STM32 + STM8 control module
261
Two-controller STM32 + STM8 control module
Embedded Systems & Microcontrollers
Completed two-controller STM32 + STM8 (SOP20) control module designed for receiving commands and sending status (information, temperature) to the central control console. The actuator device is a bistable relay. The second controller (STM8) is a…
Payment for the executive device according to the RS-485 Modbus protocol
217
Payment for the executive device according to the RS-485 Modbus protocol
Embedded Systems & Microcontrollers
Prototype STM32 (SOP20) control module designed for receiving commands and sending status (information, temperature) to the central control console. A DC-DC converter up to 40 volts is used for power supply, with an RJ-45 connector, and the Modbus…
6-channel relay control board
256
6-channel relay control board
Embedded Systems & Microcontrollers
Implemented using shift registers, meaning it can scale up to 64 relay channels. The board for placing the controller is universal-modular, designed for 20 contacts, for soldering STM32 (LQFP32). Connectors, fuses for each channel, and a pulse DC-DC…
Wiring for SOP-20 package (STM8/STM32)
203
Wiring for SOP-20 package (STM8/STM32)
Embedded Systems & Microcontrollers
Soldering adapter for SOP-20 package. The printed circuit board has a solder mask applied. Tinning is possible both chemically (cold) and with various types of low- and high-temperature solders (and solder pastes of the BGA type). In the photo -…
STM32 control board
245
STM32 control board
Embedded Systems & Microcontrollers
On the right - the board on STM32 (SSOP-20). On the left - similar functionality on ATTINY13 (DIP-8). The test board is a worn-out, soldered-resoldered 10 times sample, on which characteristics, logic, load, etc. are tested. The final version is…
Vitaly Savchenko

Embedded Systems & Microcontrollers · C & C++

0 0
153
Go to profile
Clock on lamps with accelerometer.
29
Clock on lamps with accelerometer.
Embedded Systems & Microcontrollers
It was necessary to repeat the design of the clock on the gas discharge lamps with some additions. For the project was developed its own fee, the selection of components was made to minimize electricity consumption. The basis was two chips…