Budget: 3000 PLN Deadline: 6 days
Good day! I am ready to professionally complete this project, I have extensive experience working with beauty salons, last year we implemented a project. There are works of beauty salons. 7 euros per square meter.
To develop a universal design concept for a beauty salon with an area of 40–45 m²,
not tied to a specific location, with the possibility of quick launch during rental holidays.
Segment: premium (not luxury)
Goal: high revenue per m² while maintaining comfort for clients and staff
Principle:
minimum investment in capital elements / focus on movable
Important:
The space should look expensive and unusual,
but be as economical as possible in implementation.
Industrial / electro-aesthetic
Concrete, gray surfaces, microcement, imitations
Contrast:
rough base
premium light
expressive furniture and details
Minimalism, order, sense of control
Cozy
The finished project of an existing salon should not be copied.
It is acceptable to take an accent color.
The interior should:
be visually diverse,
not look like “one gray room”,
evoke a desire to photograph each area.
Requirements:
several visually different zones in one open space,
contrasts of materials, shapes, and light,
each zone = potential photo point.
Diversity is achieved:
through light, composition, and details,
not through expensive materials.
Spaces after builders are considered:
concrete walls
concrete ceiling
concrete floor
Floor
concrete + transparent protective coating (varnish / epoxy)
Ceiling (suggestion)
leave open
without drywall
focus on lighting
Walls (suggestion)
gray / concrete
local accents (painting, minimal drywall)
Principle:
everything that remains in the room — minimal investments
everything valuable — movable
Must include:
Manicure — 3-5 workstations
width of one ≥ 80 cm
tables easy to clean, resistant to acetone
Pedicure — 1-2 places
podium + water supply and drainage
Brows — 1-2 places
Reception + waiting area
Sterilization area — ≈ 2 m², isolated
Kitchen / staff area
Client toilet
Storage / warehouse (cabinet)
(combination with kitchen is allowed)
Open access to the sink (SanPiD standards)
Furniture:
chairs and armchairs that are easy to disinfect and wipe
(no velvet or complex fabrics).
Format:
open space
visual zoning
(light, furniture, glass, mirrors — without unnecessary doors)
The project must consider ergonomics, comfort, and safe distances between zones.
Mandatory:
sufficient passageways between workstations,
absence of a feeling of tightness,
comfortable movement for clients and staff,
correct door and passage dimensions,
absence of flow intersections.
The pedicure area should be visually isolated so that:
the client's legs are not visible to other visitors,
there is no discomfort or awkwardness.
Acceptable solutions:
partitions without doors,
zoning
Lighting:
working (quality of services),
general,
accent (premium effect).
Light is a key tool for creating an “expensive” feeling.
Simple and inexpensive solution
Minimalist branding
Stickers / graphics on glass are allowed
The project is developed with a focus on minimal CAPEX.
Guidelines (upper limits):
Repair: 600–800 PLN / m²
(goal — closer to the lower limit)
Furniture and accessories: 400–900 PLN / m²
(movable elements)
Lighting: up to 10,000 PLN (maximum)
Priority:
if it can be done cheaper — this is an advantage,
the project must be implemented without exceeding these guidelines.
Additionally:
the concept should allow for partially shifting capital works to the landlord
(floor, restroom, basic engineering).
At the output:
interior concept (PDF / presentation),
list of materials with prices and links (Poland),
furniture and light with sources of purchase
(if not custom items).
the concept can be adapted to any space of 40–45 m²,
the real opening budget is clear,
ergonomics, passage, and distance standards are met,
the pedicure area is comfortable and visually isolated,
the interior looks more expensive than it costs,
the space is desirable to photograph.
The design concept should be developed in such a way that it can be adapted to any space of 40–45 m², regardless of:
the configuration and location of load-bearing and non-load-bearing walls,
the shape of the room,
the location of the entrance group,
existing engineering points.
Solutions for layout, zoning, furniture, and light should be flexible and modular,
allowing for quick adjustments of the concept to a specific space without reworking the overall idea and without significantly increasing the budget.
As part of the work, I provide:
references of design solutions that reflect the desired direction, atmosphere, and approach,
examples of interiors and details that are liked and can be used as a guideline,
the design of the existing salon, from which only the accent color can be taken
It is allowed and welcomed:
the use of warm accents in the interior,
inserts of brown shades,
the use of dark wood or its quality imitation
(in furniture, details, accessories).
References are provided for understanding the stylistic direction and logic.
also open to suggestions that are relevant in 2026 and will be relevant for the next 5 years.
Develop a universal design concept for a beauty salon with an area of 40–45 m²,
not tied to a specific location, with the possibility of quick launch during rental holidays.
Segment: premium (not luxury)
Goal: high revenue per m² while maintaining comfort for clients and staff
Principle:
minimum investment in capital elements / focus on movable
Important:
The space should look expensive and unusual,
but be as economical as possible in implementation.
Industrial / electro-aesthetic
Concrete, gray surfaces, microcement, imitations
Contrast:
rough base
premium light
expressive furniture and details
Minimalism, order, feeling of control
Cozy
The finished project of an existing salon should not be copied.
It is acceptable to take an accent color.
The interior should:
be visually diverse,
not look like “one gray room”,
evoke a desire to photograph each area.
Requirements:
several visually different zones in one open space,
contrasts of materials, shapes, and light,
each zone = potential photo point.
Diversity is achieved:
through light, composition, and details,
not through expensive materials.
Consider spaces after builders:
concrete walls
concrete ceiling
concrete floor
Floor
concrete + transparent protective coating (varnish / epoxy)
Ceiling (suggestion)
leave open
without drywall
focus on lighting
Walls (suggestion)
gray / concrete
local accents (painting, minimal drywall)
Principle:
everything that remains in the room — minimal investments
everything valuable — movable
Must include:
Manicure — 3-5 workstations
width of one ≥ 80 cm
tables easy to clean, resistant to acetone
Pedicure — 1-2 places
podium + water supply and drainage
Brows — 1-2 places
Reception + waiting area
Sterilization area — ≈ 2 m², isolated
Kitchen / staff area
Client toilet
Storage / warehouse (cabinet)
(combination with kitchen is allowed)
Open access to the sink (SanPiD standards)
Furniture:
chairs and armchairs that are easy to disinfect and wipe
(no velvet or complex fabrics).
Format:
open space
visual zoning
(light, furniture, glass, mirrors — without unnecessary doors)
The project must consider ergonomics, comfort, and safe distances between zones.
Mandatory:
sufficient passageways between workstations,
absence of a feeling of tightness,
comfortable movement for clients and staff,
correct door and passage dimensions,
absence of flow intersections.
The pedicure area should be visually isolated so that:
clients' legs are not visible to other visitors,
there is no discomfort or awkwardness.
Acceptable solutions:
partitions without doors,
zoning
Lighting:
working (quality of services),
general,
accent (premium effect).
Light is a key tool for creating an “expensive” feeling.
Simple and inexpensive solution
Minimalist branding
Stickers / graphics on glass are allowed
The project is developed with a focus on minimal CAPEX.
Guidelines (upper limits):
Repair: 600–800 PLN / m²
(goal — closer to the lower limit)
Furniture and accessories: 400–900 PLN / m²
(movable elements)
Lighting: up to 10,000 PLN (maximum)
Priority:
if it can be done cheaper — it is an advantage,
the project must be implemented without exceeding these guidelines.
Additionally:
the concept should allow for partially shifting capital works to the landlord
(floor, restroom, basic engineering).
At the output:
interior concept (PDF / presentation),
list of materials with prices and links (Poland),
furniture and lighting with sources of purchase
(if not custom items).
the concept can be adapted to any space of 40–45 m²,
the real opening budget is clear,
ergonomics, passage, and distance norms are observed,
the pedicure area is comfortable and visually isolated,
the interior looks more expensive than it costs,
the space is desirable to photograph.
The design concept should be developed in such a way that it can be adapted to any space of 40–45 m², regardless of:
the configuration and location of load-bearing and non-load-bearing walls,
the shape of the room,
the location of the entrance group,
existing engineering points.
Layout, zoning, furniture, and lighting solutions should be flexible and modular,
allowing for quick adjustments to the concept for a specific space without reworking the overall idea and without significantly increasing the budget.
As part of the work, I provide:
references of design solutions that reflect the desired direction, atmosphere, and approach,
examples of interiors and details that are liked and can be used as a reference,
design of the existing salon, from which only the accent color can be taken
Using warm accents in the interior is allowed and welcomed:
inserts of brown shades,
use of dark wood or its quality imitation
(in furniture, details, accessories).
References are provided for understanding the stylistic direction and logic.
also open to proposals that are relevant in 2026 and will be relevant for the next 5 years.
As part of the project, it is necessary to develop a photorealistic visualization of the interior, creating the feeling of an already implemented salon, rather than a conceptual sketch.
visualizations should look like photographs of the finished space,
with realistic light, materials, textures, and proportions;
use real materials, furniture, and fixtures,
that can be purchased and implemented within the specified budget;
exclude abstract, artistic, or schematic renders.
a sense of scale and real dimensions of the space;
the atmosphere of a functioning premium salon;
depth, light, shadows, and texture of materials;
comfort and coziness, not “exhibition interior”.
Minimum set of visualizations:
overall view of the space upon entry;
reception and waiting area;
manicure area;
pedicure area (with emphasis on visual privacy);
1–2 detailed shots (furniture, light, materials).
Each angle should be a standalone photo zone,
suitable for use in presentations, Instagram, and marketing materials.
realistic color correction;
correct light temperature;
absence of “overexposed” or unnatural effects;
visualization should be as close as possible to how the interior will look in reality after implementation.
Visualization is considered accepted if:
images are perceived as photographs of the finished salon;
investment decisions can be made based on the visualizations;
the space looks feasible within the specified budget;
visualizations can be used without modifications in marketing.
Budget: 3000 PLN Deadline: 6 days
Good day! I am ready to professionally complete this project, I have extensive experience working with beauty salons, last year we implemented a project. There are works of beauty salons. 7 euros per square meter.
Budget: 3600 PLN Deadline: 21 days
Good day! I am ready to professionally execute this project, I have extensive experience working with beauty salons, last year we implemented a project for a premium modern salon in the States, I can send the link in private messages. Examples and the overall level of work can also be viewed in my profile: Freelancehunt Overall, the style is close, it would be interesting to work together!
Budget: 1000 PLN Deadline: 7 days
Good day, I am ready to discuss everything, I have experience in creating beauty salon designs 300 UAH per 1 square meter
Budget: 800 PLN Deadline: 5 days
Hello.
I will do the work quickly and efficiently.
Extensive practical experience.
I am engaged in architectural and construction projects, developing concepts of varying complexity, 3D modeling, 3D visualization, 3D video animation, project presentation, interior and exterior design, video editing, working with AI, as well as product design, developing furniture prototypes (the developed and produced prototypes were taken to the International Furniture Fair in Canada, and later went into mass production), industrial design for mass production (the developed street lamp was installed in large quantities in different cities in different countries), product listing. Excellent knowledge in ergonomics, regulatory framework in the field of construction design. Extensive practical experience. Creative approach to work. I work in programs 3ds Max + V-Ray + Corona, SketchUp + V-Ray, AutoCAD, Revit, Photoshop, Lumion, After Effects, Archicad. My portfolio Google Drive
Google Drive
https://3ddomkiev.wixsite.com/website-2
Design a case model for an electronic device for 3D printing, and also for future use with a syringe press. The case must have openings for USB-A, USB-C, BH-8 connector, display, a hole for an internal reset button, openings for buttons and button pushers. The board can be completely redesigned if your design is more ergonomic. An approximate appearance is shown in the photo.
I wish to create a 3D visualization of the room's interior to understand the comprehensive layout of the furniture and the overall picture after the renovation. I already have all the photos of the furniture elements; they need to be arranged in the space to give the room the appearance it should have after the renovation.
Modification of the STL model of the impeller for 3D printing (PETG)There is a ready STL model of a two-blade propeller for a jet ski SUP board. The geometry of the hub and the seat for the shaft are completely satisfactory, they do not need to be changed.What needs to be done:“Cut off” the old 2 blades from the existing hub.Design 3 new blades from scratch.The radial gap between the edge of the blades and the inner wall of the housing (nozzle) must be strictly 1.5 mm.Technical data for calculating angles and pitch:Motor: Brushless, KV\ 200 (diameter about 50 mm).Power supply: 42 V battery (BMS 60 A).Controller: VESC 75200 V2.The model must be optimized for FDM printing with PETG plastic (strong fillets at the junctions of the blades to the hub).
Good day. The essence of this project is to create product photos for the website. I will provide the approximate style and designs of the houses. I will provide samples of how it should look. Please send samples of your work. And we will collaborate.
3D model of an armrest and foot support (outlined in the photo) is needed for CNC machining armrest 6x6x50 cm Maximum width of the lower part is approximately 11 cm Height 30 cm