Design of the loggia
Technical assignment for the visualization of the loggia
A 3D visualization of the loggia needs to be created based on my dimensions and description.
This is not a complete design project with drawings, but a visual representation to understand the arrangement of materials, lighting, and furniture.
1. Initial data
Loggia:
Length: 6 meters
Depth: 136 cm
Ceiling height: 270 cm
Visually divided into 2 zones by a beam (beam on the ceiling)
There is a column in the middle (pass-through, does not block the passage, separates large glass)
Entrances:
From the room side without a door
From the kitchen side with a door
2. General concept
The space is divided into two zones:
1️⃣ Kitchen side chill/lounge zone
2️⃣ Room side working zone (table + shelves)
3. Finishing
Ceiling
Wooden seamless paneling with a chamfer, Ash wood
Slats along the entire length (6 meters)
Leave the beam as a visual divider,
resulting in 2 zones of approximately 270 + beam
(leave the beam as a divider)
Walls
The side walls are also in the same paneling
vertically.
The wall from the apartment side opposite the window—separate finishing (microcement or decorative plaster is possible)
Floor
Porcelain stoneware 120 by 60
Horizontal or vertical laying is still unknown
Color matte light beige
Kitchen zone (chill)
Small sofa 130 cm
Possible sconces on the sides
A pipe from the gas boiler runs along the wall from the kitchen (needs to be beautifully designed, decorative wooden cylindrical box)
2–4 sockets for electronics.
Room zone (working)
Compact office desk
Shelves from the desk up to the ceiling, also 2-4 sockets
Lighting (general idea)
Ceiling from glass 20 cm
LED backlighting with a black diffuser, embedding LED strip with profile into the paneling
From edge to edge, along the entire length of the paneling.
Also, 2 track blocks for 4-6 fixtures in each zone (one block for the kitchen zone and one block for the room zone)
Chill zone
Backlighting of the decorative wooden box hiding the gas boiler pipe (LED strip inside the box or directed soft light from above/below is possible).
Possible sconces on the sides of the sofa for additional local light and creating a soft atmosphere.
Working zone (from the room side)
Still unknown about the lighting)
I am doing the renovation myself, this project will help me remember where everything should be.
You don’t need to think here, everything has already been thought out, you just need to implement it for clarity so that it serves as my cheat sheet
Applications 2
-
3 days74 USD
3 days74 USD
Good day! I am ready to take the project into work. I have been working in Blender for over 4 years. The price per square is 150 UAH.
-
7 days25 USD
224 7 days25 USD
Hello. We can try to solve this interesting task together, taking into account your point of view. First, I can form a concept, and then you will decide whether to continue or not, and only after that we can discuss both the deadlines and payment. I can send my portfolio upon your request.
-
5 days67 USD
205 5 days67 USD
Hello! I am a 3D visualizer with an architectural education. I can complete your task, the cost is $6 per square meter. We can discuss the details.
-
7 days33 USD
205 7 days33 USD
Good day!
I can create a 3D model for you, where everything will be visually clear, including textures/colors.
I will also gladly help with the selection of lighting and other interior items that are necessary.
Examples of my work and how the models look are in my portfolio.
I look forward to collaborating, wishing you a great day.
-
2 days67 USD
755 9 0 2 days67 USD
Hello😊
I am ready to create a 3D visualization of the loggia according to your specifications and dimensions — without unnecessary "design fantasies," strictly based on the description, as a visual working cheat sheet for the renovation.
I will do:
• 2–3 angles of each area
• daytime and evening lighting scenarios
• precise placement of finishes, furniture, and lighting
-
2 days33 USD
367 4 1 2 days33 USD
Good day! I am interested in your project and would like to complete it. I work in Blender, Cinema 4D, 3ds Max and have experience. If the offer is relevant, please write to me privately. I would be happy to do this work!
Behance
-
2 days42 USD
974 29 1 1 2 days42 USD
Hello.
I will do the work quickly and efficiently.
Extensive practical experience.
I am engaged in architectural and construction projects, developing concepts of varying complexity, 3D modeling, 3D visualization, 3D video animation, presenting architectural and construction projects, interior and exterior design, video editing, working with AI, as well as product design, developing furniture prototypes (the developed and produced prototypes were taken to the International Furniture Fair in Canada, and later went into mass production), industrial design for mass production (the developed street lamp was installed in large quantities in different cities in different countries), product listing. Excellent knowledge in ergonomics, regulatory framework in the field of construction design. Extensive practical experience. A creative approach to work. I work in programs 3ds Max + V-Ray + Corona, SketchUp + V-Ray, AutoCAD, Revit, Photoshop, Lumion, After Effects, Archicad. My portfolio:
Google Drive
https://3ddomkiev.wixsite.com/website-2
-
4 days45 USD
164 4 days45 USD
Contact me. I will perform 3D visualization. We can discuss the details.
-
5 days78 USD
436 2 0 5 days78 USD
Good day. I have reviewed the technical assignment, it is very detailed and clear. I am ready to bring everything described to a realistic 3D visualization, I work in 3ds Max + Corona Render. Portfolio:
Behance
-
5 days56 USD
849 14 0 5 days56 USD
Hello. I am ready to collaborate with you. I am an architect-engineer, and I have been working in design for about 15 years. I will offer a stylish, thoughtful, comfortable, and functional interior. You can view my work in my profile and at https://photos.app.goo.gl/uE3SiM4W6DU512qc6. Sincerely, Elena.
-
2 days50 USD
414 10 1 2 days50 USD
Contact me.
I will perform 3D visualization.
2 rounds of revisions on the content.
-
3 days67 USD
733 8 0 3 days67 USD
Good day!
Feel free to contact me, I will bring your idea to visualization.
I will be happy to collaborate.
-
4 days67 USD
8643 32 0 4 days67 USD
Alexander, greetings!
I can create such a visualization according to your wishes.
Examples of my work are in the profile.
Feel free to reach out, I will be happy to help with the project.
Best regards - Anastasia
-
3 days67 USD
765 19 0 3 days67 USD
Good day.
Well, since you don't need to think ))) just reach out. I will draw it as needed.
Everything will be according to the current standards.)))
-
3 days56 USD
1278 9 1 3 days56 USD
Hello!
I will create high-quality 3D visualizations of the loggia based on your description and provided dimensions.
Examples of my work are in my profile and at the following links:
https://panorama.homestyler.com/v2?m=p&id=oGRpqRL9tVvUtz497NvPvS&locale=en_US
https://panorama.homestyler.com/v2?m=np&id=k4fz9CtY3ZkaeXYbQAA6a9&locale=en_US
-
3 days89 USD
4942 35 0 3 days89 USD
Good day! I will create a beautiful visualization of your idea. I work quickly. I can start today.
-
3 days67 USD
502 3 days67 USD
Good day!
I have reviewed your project - overall everything is clear. I am ready to perform the 3D visualization of the loggia according to your technical specifications and description.
I suggest we discuss the details and start working immediately.
Examples of completed works are available in my profile.
-
3 days67 USD
3642 25 0 3 days67 USD
Good day! I am ready to complete your project, feel free to contact me, we will discuss everything and I will send examples of similar projects. My works can also be viewed in the portfolio. I will be happy to collaborate!
-
6 days67 USD
706 6 0 1 6 days67 USD
I propose to create an accurate 3D visualization of the loggia according to your specifications — without changing the concept, strictly according to the dimensions and description. You will receive a visual image with materials, lighting, and furniture, which will serve as your clear "cheat sheet" for a calm and confident renovation. If you have already decided on the tone of the paneling and the type of tiles, I can specifically include them in the visualization for greater realism.
-
4 days67 USD
1033 6 0 4 days67 USD
Good day) I am ready to complete your task, the cost is $6 per square meter. We can discuss the details.
-
9 days65 USD
1135 21 0 9 days65 USD
Hello! I am ready to collaborate and create a 3D visualization according to your requirements. Let's discuss the details!
-
6 days56 USD
387 1 0 6 days56 USD
Hello!
I have carefully reviewed the technical assignment — everything is clear 👍
I will create a 3D visualization of the loggia precisely according to your dimensions and description, without unnecessary changes to the concept.
What I will consider:
✔ division into two zones with a railing as a visual separator
✔ exact placement of furniture (sofa 130 cm, work desk, shelves)
… ✔ decorative box around the gas boiler pipe
✔ lighting scheme with LED backlighting and track lights
✔ options for laying tiles 120×60
✔ accurate representation of materials (ash paneling, microcement/plaster, porcelain stoneware)
I will provide several angles to help you navigate during the renovation.
This will be a clear "cheat sheet" for implementation, without overwhelming documentation.
I am ready to start after clarifying the details.
-
3 days45 USD
563 2 0 3 days45 USD
Hello, I will be happy to create a visualization of your loggia for you. The price is $7 per square meter, and do you need technical drawings? Here are my works in the profile.
-
2 days89 USD
4066 52 0 1 2 days89 USD
Good day!
I will create photorealistic visualizations in high resolution based on the specified materials and light sources.
The deadline is up to 2 days.
Angles as many as needed.
I am calm about revisions.
Write to me, I will be happy to help!
-
3 days45 USD
169 3 days45 USD
Hello!
I have reviewed the detailed technical assignment for the visualization of the loggia (6 m x 1.36 m). My goal is to transfer your ideas into an accurate 3D model, which will serve as a visual reference during the renovation implementation.
portfolio- Google Drive
-
4 days89 USD
292 4 days89 USD
Current freelance projects in the category 3D Modeling
Designing parts (pads for a bag for 3D printing)A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 1 hour 9 minutes back ∙ 5 proposals |
Visualization of a chair
45 USD
There is a 3D model of a chair. Changes need to be made to the backrest and the fabric on the seat needs to be replaced. It should be made as similar as possible to the photo. I am attaching the photo. I will provide more detailed specifications with links to the fabric textures… 3D Modeling ∙ 1 day 2 hours back ∙ 43 proposals |
3D model of a "banana" bag with a die-cut handleTask: 3D model of a "banana" bag with a die-cut handle (for interactive mockup)1. Purpose A parametric 3D model of a polyethylene "banana" bag with a die-cut handle. The model will be used in a web viewer (Three.js / glTF) for an interactive mockup: the client's print layout is… 3D Modeling ∙ 1 day 2 hours back ∙ 2 proposals |
3D Model of the HOTAS Handle
100 USD
A 3D modeler with experience in Rhino or Plasticity is needed to create an ergonomic CAD model of a HOTAS grip (joystick handle). The basis should be the Virpil Constellation Alpha, and its external shape and ergonomics should be reproduced as accurately as possible based on the… 3D Modeling ∙ 2 days 2 hours back ∙ 2 proposals |
I am looking for a FreeCad program instructor.I'm looking for a FreeCad instructor. The goal is to learn how to design technical parts for 3D printing. 3D Modeling, Tuition ∙ 3 days 1 hour back |
Chernigov