Design of logos.
I did what I needed and even more.
There is no claim to the quality of the work performed, she did everything in time and was constantly in contact.
I recommend it to Alena as a great professional.
Budget: 200 UAH Deadline: 1 day
Hello to
Let’s discuss the details in the personal letter.
If it is more convenient, write:
HTTPS://vk.com/maxwork
The price is from 100 to ....grn. Depending on the complexity of the negation
Show the patterns for the beginning what could be called the price
Some of my works can be seen:
Freelancehunt
Budget: 1 UAH Deadline: 1 day
Hello to you!
Ready to help, let’s discuss!
With respect, Yuri!
Budget: 1 UAH Deadline: 1 day
Go to turn!
Details in the personal letter.
Email: [email protected]
by Skype; vinpixels
Budget: 200 UAH Deadline: 7 days
Ready to work on your project. Quality and timetables are guaranteed. Changes can be made unlimited times. Without a prepaid.
Budget: 1000 UAH Deadline: 2 days
+
Budget: 77 USD Deadline: 1 day
Good night ! I will be happy to work with you – I work well and quickly. In addition, I am a pedant - I don't like the halls.
The customer is satisfied - I am satisfied, so I take into account all the wishes, make the directions, get to the ideal!
by admin by admin by admin
portfolio - Freelancehunt
Skype: inna.vasylets
by p.s. TZ, deadlines and costs can be discussed at LS.
Budget: 200 UAH Deadline: 1 day
Good day ! I will be happy to fulfill your project.
Budget: 25 USD Deadline: 1 day
Hello to write!
Budget: 100 UAH Deadline: 2 days
Good day ! I will be happy to cooperate!
Budget: 1 UAH Deadline: 1 day
I will do. I just wanted to clarify some details.
My contacts are http://www.fesenko.com.ua/about/
Budget: 1 UAH Deadline: 1 day
Hello to you. I will be happy to cooperate.
Show the logo you need to negate.
Contact us - ready to discuss the project in detail
by admin by admin by admin
Portfolio in the process of filling http://portfolios.ru/YJprint
by [email protected]
Ylitka-Donetsk (Skype)
or LS
Budget: 200 UAH Deadline: 1 day
Good day . Here is a link to the portfolio: https://www.flickr.com/photos/katyasamarina
Budget: 1 UAH Deadline: 1 day
Please send the logos to personal messages. Let’s discuss details.
of quality. Cheap is.
Budget: 400 UAH Deadline: 2 days
Qualitatively, I take into account all wishes.
Send the logos to LS. The cost can change depending on the complexity of the neglect.
Portfolio in the profile.
Budget: 1000 UAH Deadline: 5 days
Hello to you! Ready to take your project. I do everything stylish and modern. I work quickly and always in contact. Go to turn!
Portfolio: Freelancehunt
Budget: 1 UAH Deadline: 2 days
Contact us, we will discuss details.
Budget: 1 UAH Deadline: 5 days
+
Budget: 1 UAH Deadline: 1 day
Write and we will discuss.
Budget: 500 UAH Deadline: 7 days
Hello to Roman!
I have read about your project. Please contact me, I will develop memorable logos.
You will be 100% satisfied with the result.
With TZ familiarized, there are already interesting ideas for development.
With respect, the government.
My portfolio:
Freelancehunt
My contacts:
Skype by Vlad_Chev
Email: [email protected]
Budget: 200 UAH Deadline: 2 days
Go to turn!
Budget: 1 UAH Deadline: 1 day
Ready to discuss. Quality and cheap.
Budget: 200 UAH Deadline: 2 days
For discussion of details - [email protected]
See the portfolio http://astur-mirans.wix.com/asturmirans
Budget: 75 UAH Deadline: 2 days
Good morning, ready to fulfill your order. Go to turn!
Budget: 1 UAH Deadline: 1 day
+
Budget: 200 UAH Deadline: 4 days
I do! The price for everyone. We need to see the origins.
Budget: 200 UAH Deadline: 5 days
I will do. Let us discuss details.
Budget: 1 UAH Deadline: 1 day
My work in the profile, this work was done, please contact us, we will discuss!
Budget: 800 UAH Deadline: 15 days
Ready to perform your project quality at a minimum.
time with the maximum amount.
by: aleksandrptushko
by [email protected]
Budget: 200 UAH Deadline: 5 days
Hello to Roman. Ready to implement your project. A creative approach is guaranteed. Write to LS. There is experience. You can see my work in the profile.
Budget: 1 UAH Deadline: 1 day
I would like to see the logos.
Budget: 200 UAH Deadline: 2 days
Ready to cooperate!
Прикрепите, пожалуйста, примеры того, что нужно отрисовать. Стоимость зависит от сложности прорисовки.
Заранее спасибо)
Там не просто отрисовка в векторе, а создание лого, как я понимаю. Есть ТЗ каждого логотипа и по несколько примеров (разных). Так что бюджет неадекватен.
"Создание лого" це грубо сказано, оскільки відтворити треба один, якій я вкажу, а з вашої сторони потрібно мінімально освіжити.
Щодо бюджету, відмалювати лого і створити лого це дві великі різниці. Бюджет відповідає поставленій задачі і не вимагає виликих затрат по часу.
"відтворити треба один, якій я вкажу" - кажіть який, почнемо працювати!
Странно,сейчас вы пишите одно а в ТЗ написано совсем другое.Для начала нужно определяться чего именно вам хочется, а потом уже идти за помощью на фриланс.
Если все будет просто и понятно, То сделаю до завтрашнего утра(обеда.)
Congratulations! I am looking for an experienced CAD engineer / CNC modeler with artistic taste to translate an author's graphic sketch into vector drawings for production.The material for the future product will be colored ceramic tiles and natural stone. The elements will be cut on a waterjet cutting machine and decorated on a CNC milling/laser engraving machine.Main project parameters: Base for work: Work is strictly based on the attached author's sketch (panorama of Gdańsk, slightly elevated view). The overall composition, density of development, and rhythm of roofs must be preserved. Dimensions of the finished panel: The final size of the entire picture is 29.5×42 cm (A3 format). Stylistics: It is important to maintain the effect of hand-made. Avoid perfect computer geometry and serious perspective. Lines should be lively, with a slight artistic curvature (imitation of ancient mosaics). Scaling and optimization: Since the overall size of the panel is small, the designer has the right and must simplify small architectural details, change their size, and avoid critically thin areas (the minimum thickness of any physically cut detail, such as a pipe, should be at least 3–4 mm to prevent material from breaking).Technological requirements for construction (Puzzle and Layers):The panel will be assembled from materials of different thicknesses to create a physical 3D volume. Elements need to be divided by layers and labeled in the drawings with the following thicknesses: Background (rear row of houses): Thickness 5 mm. They connect with the middle plan with a minimal optical gap. Bare winter trees at the very top do not need to be cut out – they are designed solely as lines for laser engraving on the background plate of the sky. Middle plan (central row of houses): Thickness 6.5 mm. Foreground (front row of houses): Thickness 8 mm. Drain pipes: Designed as separate parts with a thickness of 10 mm (they should protrude above the entire panel). Insert windows (for the lower and middle rows): Each window is designed as a separate physical part, inserted into the grooves of the walls with minimal gap (optical seamless joint). For the rear row (5 mm), the micro-sized window is made exclusively with a through cut or deep engraving.What should be delivered (two types of programs/layers in DXF/DWG): Program No. 1 (Waterjet contour cutting): All outer contours of the parts (houses, pipes, white windows) taking into account the technological gap (play) between adjacent houses of 1.5 mm (to create an artistic mosaic joint). Program No. 2 (Milling/Surface Engraving): Layer "Deep": Cornices, window sills, door portals, balustrades. Layer "Medium": Large contours of windows, relief of tiles on roofs. Layer "Thin": Mullions of window frames, bricks on chimneys, artistic cracks on walls for an antique effect.For details and clarification of the facades' plasticity (entrance groups, pediments), real photographs of Gdańsk from the internet can be used (views of streets Długa, Mariacka, Piwna from above).Safety and copyright: Before transferring the technical specifications to the contractor, confidentiality conditions (NDA) are agreed upon. All rights to the developed files fully transfer to the Client. Publication in a portfolio or use of files for external purposes is prohibited.Please indicate the cost and timeline for developing the starter set (test 1-2 houses), as well as the estimated cost of the entire A3 panel. Attach examples of your work for CNC/laser The estimated budget for developing such a drawing is $500 USD. Additionally, I would be happy to consider an offer for manufacturing such a product on waterjet and engraving CNC equipment and place a larger order.
Good day. It is necessary to develop a drawing of the product for further cutting on a CNC machine in AutoCAD. Create the drawing in AutoCAD. Prepare the file in a format suitable for CNC cutting (DXF/DWG). All dimensions must correspond to the provided parameters. Be sure to consider the cutting thickness when constructing the drawing. The contours must be closed and free of overlaps, duplicate lines, and unnecessary elements.
for the brand PROSTORA. A modern, simple, and memorable logo is needed that will be associated with space, order, convenience, and reliability. As an example - a sketch in lines, dawn, a room with an open window, a flowing curtain. The logo should look good on signage, websites, business cards, packaging, advertising, and social media. It is preferable to prepare several concepts to choose from and final files in the formats: AI, EPS, SVG, PDF, PNG.
Currently, I have mobilized another mentor for Photoshop with whom I worked and had three sessions. But before finding a new mentor, I want to ask if you also specialize in other programs besides Photoshop, such as Adobe Illustrator, CorelDraw, InDesign, Canva? Please send your portfolio, and I will definitely look at your skills. He was proficient in all the software I listed, and such professionals are unfortunately rare now. With him, I studied cropping in Photoshop, knowledge about ppi and scaling, file formats, watermarks, transformations, file parameters, such as 1920x1080, for example. And now I have stopped at the most interesting topic - Layers, vector, raster, and clipping masks, Smart Objects, compositing. So I want to say right away that I do not need training from scratch; I need to continue the topic where I left off.
It is necessary to redraw the design of the wrestling singlet in vector format. Everything should be done the same way. Only the edging around the armholes and the head should not be done.