Thank you to Victoria for the help.
Budget: 200 UAH Deadline: 2 days
Hello to you!
I will be happy to take your project.
I make several options.
Write, we will discuss details!
With respect, Yuri!
Viktoriia Kropivnitska
Winning proposal- Projects 3
- Rating -
- Rating 478
Budget: 150 UAH Deadline: 7 days
by Artem!
Ready to properly prepare the design for printing in printing, and I also offer a small adjustment of the design of your booklet in accordance with the design principles:
- not more than 3 different fonts in one model;
- to pick up a non-invasive interesting background that better "organizes" the information of the booklet.
My portfolio is: Freelancehunt
Budget: 100 UAH Deadline: 1 day
Simply 😉
Budget: 70 UAH Deadline: 1 day
Hello, I can do it.
by [email protected]
+38 063 053 86 67
- Projects -
- Rating -
- Rating 123
Budget: 50 USD Deadline: 2 days
Hello to Arthur.
Your booklet doesn’t need to be upgraded, but to be created from zero. I can help, call me.
Budget: 100 UAH Deadline: 1 day
I will do it quickly and efficiently.)
Budget: 1 UAH Deadline: 1 day
Write in the face, we will discuss, we will do everything in the best way!
[email protected]
Budget: 100 UAH Deadline: 1 day
I am pleased to help you!)
Budget: 100 UAH Deadline: 1 day
Go to turn!
Budget: 100 UAH Deadline: 2 days
By judgment of the model, you just need to do everything again))
- Projects -
- Rating -
- Rating 316
Budget: 50 UAH Deadline: 1 day
I am pleased to blame you.
Write to Skype my_akvarel1
Budget: 1 UAH Deadline: 1 day
We do it quickly and quality. Contact us, we will discuss!
Budget: 50 UAH Deadline: 1 day
Hello to Arthur!
I am pleased to take the project! Qualitatively and accurately. the experience? Of course there is. I work as a designer of polygraphy, many flags, billboards, booklets, etc. They pass through my life. The portfolio can be viewed in the profile and on the website www.trinetdesign.com.ua
with respect,
The Government
+38 (093) 926-61-28
www.trinetdesign.com
[email protected]
- Projects -
- Rating -
- Rating 87
Budget: 1 UAH Deadline: 1 day
Good day .
Ready to discuss the conditions of cooperation.
7 years in the position of a computer design specialist in a large
and typography. Knowledge of Adobe Photoshop, Illustrator, InDesign, Corel at the level of hot keys.
On contact full-time (skip, mail: [email protected], ICQ).
–
with respect,
by Julia.
Budget: 100 UAH Deadline: 1 day
+
This work must be done in a vector graphics program, such as Adobe Illustrator is not above CS4 or is not above CS4 in Adobe InDesign.
Budget: 100 UAH Deadline: 1 day
Hello to you.
I have more than 13 years of printing experience.
Ready to make the makeup.
Budget: 1 UAH Deadline: 1 day
I make a response.
Budget: 100 UAH Deadline: 1 day
+
Budget: 1 UAH Deadline: 1 day
Ready to take the project and perform quality.
- Projects -
- Rating -
- Rating 218
Budget: 500 RUB Deadline: 1 day
Hello to you.
Ready to take your project. I will be happy to cooperate.
With respect, Constantine
Budget: 1 UAH Deadline: 1 day
Ready to perform. Write it. Discuss the details
Budget: 50 UAH Deadline: 1 day
Hello to you.
I will be glad to help.
Budget: 1 UAH Deadline: 1 day
Write – I will do it.
- Projects -
- Rating -
- Rating 174
Budget: 50 UAH Deadline: 1 day
+
Budget: 100 UAH Deadline: 1 day
Ready to do now.
I have more than 10 years of experience in printing, so I know how to do it.
Budget: 1 RUB Deadline: 1 day
Let me do now.
My portfolio is http://armdesign.jimdo.com/
by skype arman777991
Post by [email protected]
Proposals are currently absent
Proposals concealed
Budget: 200 UAH Deadline: 1 day
Hello to you!
See the portfolio http://dancingcolorsart.jimdo.com/
by [email protected]
Proposals concealed
-
Maks Banasevich 22 January 2015Тот случай когда написать как есть не позволяет воспитание, а ничего не написать - совесть.
-
Maks Banasevich 22 January 2015Когда у меня такая мысль мелькает - я вспоминаю отличный ответ. Он подходит для таких случаев - "потому-что!" =) Обычно означает что причина вполне ясна. =)
-
Yuliya Zemlyanichnaya 23 January 2015Возможно, что там много мелкого текста, например, что означает, что надо полностью переверстывать макет, делать его в векторе. Да и еще фотографии заказчик предлагает поменять. Эта работа для дизайнера. Если в типографии (не в "конторе", такие могут и переделать за миллион и брак напечатать) сидит только препресс, то заниматься дизайном никто не будет, так как на прием файлов есть требования и одно дело доделать (если есть возможность), другое переделать макет заново (векторный текст, новые изображения). Для этого есть дизайнеры, которые свои деньги зарабатывают, вот и отсылают к дизайнерам по переделке макета (не доработке).
-
Sergey Nemiroff 23 January 2015То такая "контора"! Я когда начинал, и не такое приносил, мне ВСЕ печатали без проблем, даже без вопросов! Не пойму даже, что в этом проекте такого, что не смогли бы напечатать???
-
Sergey Nemiroff 23 January 2015А, дошло, нужно чтобы было в CMYK. Тогда ясно, и что за принтеры у них, и что за контора...
В CMYK я на работе на дешевом струйном принтере печатал.
-
Maks Banasevich 23 January 2015Алексей - Вы дизайнер? Вы не знаете как готовить макет? Вы не знаете разницы между растровыми шрифтами и кривыми??? Вы удивили. Это я не говорю о "дизайне" сего "шедевра".
-
Maks Banasevich 23 January 2015перевести в CMYK не достаточно - надо еще и черный цвет текста сделать в одной плите, рабораться с тенями чтобы были не четырехцветными и так далее. впрочем этот макет все это не спасет =)
-
Yuliya Zemlyanichnaya 23 January 2015Шикарный пост! Хоть в рамочку и на стену. Мало того, что люди и читают через слово (контора в данном случае типография)! Они еще не в курсе разницы цветовых моделей и того, что черный бывает композитный, видимо, тоже.
Знаете, Алексей, они в этих типографиях ВСЕ ненормальные, все печатают на ДЕШЕВЫХ стуйных принтерах миллионные тиражи. Вот и подавай им CMYK.
Вы сделали мой день!
-
Yuliya Zemlyanichnaya 23 January 2015Посмотрела файл.
Почему типография не хочет сама делать макеты? Действительно! Это же их прямая обязанность!
Кстати, может вариант переделать макет был, но за дополнительную оплату для клиента, кто знает? Типографии МОГУТ предлагать услугу, если у них есть возможность (свободный человек, например), но не обязаны и это нормально.
Ну и в добавок... час простоя машины в типографии - это немалые деньги, для тех, кто не в курсе. Это не КОНТОРЫ, которые потом относят в типографию или печатают у себя на широкоформатном принтере. Контор существует миллион, типографий крупных в больших городах - единицы. Но люди если идут в типографии, то не хотят платить конторам наценку на печать и это понятно. А вот дизайн должен быть готов или с небольшими неточностями, если его несут в типографию и тут нет ничего странного.
Делать макет - не задача типографии, если при ней нет штата дизайнеров.
-
Olesya Pogadayeva 23 January 2015Столько ставок в 50 грн.! Ребята Вы что серьезно???!! Почему не цените свой труд и время?
Согласна с Юлией! Коллега Вам +.
Что касается макета (я его посмотрела)....
Артем, Вам прислали требования типографии для печати ОФСЕТОМ!! - вполне правильные!
(скажите спасибо, что не приняли, иначе запороли бы весь тираж).
Макет абсолютно не годится! Его не дорабатывать нужно, а полностью переделывать. Есть много тонкостей, которые я не буду упоминать.))
Понимаю, что хотите сэкономить )), но лучше заплатите знающему дизайнеру. Ведь не зря есть пословица "Жадный платит дважды",
-
Maks Banasevich 23 January 2015Таки один вопрос у меня к типографии возник =) а на хрена под обрез давать если бэк белый? =)
-
Yuliya Zemlyanichnaya 23 January 2015Я не видела оборот, может там есть что-то навылет?!
Меня немного другое удивило :), расстояние 7 мм до линии реза. Надеюсь, это у них не люфт ножа такой, а просто... с эстетической точки зрения. Т.к. 7 мм для одностраничного изделия... разве что из картона, но и то... многовато :)
-
Maks Banasevich 23 January 2015тут все просто - обычное требование. при подрезке готового изделия - если оно сложенное или несколько страничное - в середине пачки зазор уменьшается. Как я понял они просто дали стандартные требования без разбора самого макета. Если бы я такое увидел - я бы даже смотреть не стал - так бы и сделал. =)
-
Yuliya Zemlyanichnaya 23 January 2015Да будет так. :) В любом случае в данном макете 7 мм для такого кол-ва информации - не критично.
-
Yuliya Zemlyanichnaya 23 January 2015Да, помню, как после наружки (реклама на транспорте, в том числе городской транспорт: трамваи, троллейбусы, где действительно может быть +/- 0,5 м) перешла на рекламную полиграфию и этикетку, где минимальные отступы на этикетке от 1,5 мм... Разница, как говорится, разительная. :) Эээх, давно это было.
-
Yuliya Zemlyanichnaya 23 January 2015Да, за 50 грн макет сделанный заново должен быть такой же по качеству как и исходник (не для печати)! Ну, либо сдача в типографию с н-ого раза, пока поездишь, послушаешь что не так... Авось да и научишься!
-
Maks Banasevich 23 January 2015- Алло! Здравствуйте! Вы дизайнер?
- Да!
- Подскажите, у нас тут проект серьезный. Что Вы можете нам сделать за 50 грн?
- Включить компьютер.
-
Maks Banasevich 23 January 2015Комменты в этой ветке уже давно привысили по стоимости сам "шедевр" =)
Current freelance projects in the category 3D Modeling
Create a high-polygon collectible figurine in ZBrush based on the provided concept. The model must be optimized for 3D printing from photopolymer resin: divided into parts for printing (with assembly elements included) and have a "sealed" (solid) mesh; it is necessary to preserve all the folds of the clothing, portrait likeness, and the detailing of the base styled as a junkyard. Output formats: ZTL, STL, and OBJ.
Good day, I need a room design based on Ikea furniture. The main idea is to create a bedroom with the maximum possible storage for items, to declutter a large room and provide space for the future, Currently, we have only settled on the Brimnes folding bed (160x200 when unfolded), and we want a Swiss wall unit if possible (if we can find a place to put it). We also like the concept of a folding table attached to the wall or built into a wardrobe (like the Ikea Billy wardrobes). The color combination is white and a shade of natural wood (the colors in the photo I sent are not accurate). In the future, the bed may always be folded, and we want to use the freed-up space for a children's bed.
Hello everyone. I need to create a basic 3D model of a house based on the drawings. It should clearly show the placement of doors and windows, the terrace, and the structure of the house itself. Only the outer walls are needed; the interior is not required for now. I am interested in the cost and timeline. I am attaching the drawings that need to be used to assemble the 3D model.
It is necessary to showcase our products in real modern interiors and exteriors: wall finishes, ceilings, decorative beams, facades, and other elements. We provide photos of wood textures — it is important to convey their color, texture, and natural appearance as accurately as possible. Requirements: maximally realistic images, level of professional architectural visualization; correct geometry, natural lighting, and quality materials; resolution of at least 4000 px on the long side. Preferred to work in: 3ds Max + Corona/V-Ray, Blender, D5 Render, Unreal Engine 5, or use Midjourney, Flux, or Stable Diffusion with professional refinement. When responding, please send examples of similar works and an estimated cost for one image.
It is necessary to create one original 3D game model of a modern car key with a touchscreen for the game. I will provide a ready reference with views: front; back; side; top and bottom; perspective. (AI-generated) some elements like the logo on top are not needed. The reference is used to convey the overall shape, proportions, and visual direction. Some additional elements from the reference do not need to be repeated. In particular, the upper decorative logo does not need to be modeled. This is not a copy of a key from an existing car brand. Logos of BMW or other real companies cannot be added. The body should use the SE logo shown in the reference. Requirements: 1. A clean game 3D model of the key, suitable for close-up first-person use. 2. Separate objects: — main body; — side metal elements; — touchscreen; — physical buttons or decorative elements, if provided in the reference. 3. Screen: — separate object; — follows the curvature of the body surface; — without a drawn interface; — UI and icons will be added later in Unity; — without overlapping surfaces and z-fighting. 4. Geometry: — clean topology; — smooth bevels; — correct smoothing; — normals facing outward; — without holes, unnecessary intersections, and hidden heavy geometry; — reasonable optimization for the game; — the model should look good upon close inspection. 5. UV mapping: — clean; — without random intersections; — the screen should have a separate clear UV mapping 0–1. 6. Materials: — black plastic or glossy body; — metal side elements; — screen glass; — PBR textures of sufficient quality, approximately 2K; — compatibility with Unity Built-in Render Pipeline and Standard Shader. 7. Preparation for Unity: — applied Rotation and Scale; — Scale 1/1/1; — correct Pivot/Origin; — clear English names for objects and materials; — the model should not require additional paid plugins. Output files: — source .blend; — export .fbx; — all used textures; — one or several preview renders for checking the result. Not required: — animation; — rig; — working screen interface; — creating menus or UI; — complex presentation scene; — modeling the internal electronics of the key. Do not use automatically generated AI geometry as the final model. A clean and editable result is needed. After the first version, one stage of minor adjustments to the shape or materials will be required. Deadline: preferably 2–3 days. Budget: approximately 40 USD. You can propose your own price if justified by the quality and volume of work. In your response, please specify: — cost; — deadline; — examples of similar game items or object modeling; — whether you work in Blender; — approximate number of triangles in the future model. Rights to the result of the work: After full payment, the Contractor transfers to the Customer in full the exclusive property rights to the intellectual property of the final 3D model, textures, materials, and transferred source files. The Customer receives the right to use the result in commercial and non-commercial projects without territorial and time restrictions, to modify, refine, rework, integrate into games and other software products, publish, distribute, and create derivative materials based on it. The Contractor guarantees that the result is created independently and does not infringe the rights of third parties. The use of third-party models, textures, brand elements, and materials with restrictive licenses is allowed only after prior agreement with the Customer. After the transfer of rights, the Contractor has no right to resell, license, distribute, transfer to third parties, or use the final model or its significant parts in other commercial projects. Publication of the result, renders, or work process in portfolios and social networks is allowed only after prior written agreement with the Customer.