Files for 3D printing from PDF
For the first time I’m facing 3D printing, so I ask for a bad description of the project.
There is a PDF file with figures. These files need to be printed on a 3D printer.
in the PDF file of 14 patterns, what is shown green is our bottom its thickness of 2mm, the bottom must go on board with a height of 20mm and a thickness of 2mm (as shown in the picture below)
Now I will specify the required file format.
Therefore, the executive choice will not be earlier than tomorrow.
Thank you to everyone!
UPD:
Зараз ще уточнюю по необхідному формату файлу.
Тому вибір виконавця буде не раніше ніж завтра.
Всім дякую!
Applications 1
-
1 day31 USD
652 9 0 1 1 day31 USD
Ready to join your project, examples of works (including for 3D printing) can be viewed in the portfolio.
-
1 day18 USD
186 1 day18 USD
Good morning I am ready to get to work and do everything I need.
-
3 days11 USD
712 3 days11 USD
I love to make the hardness of the modes work in Moi 3d, Simens NX ,Kompas, Rinoceros I offer all kinds of files for printing as well as for editing.The price and deadlines are conditional and we will be pleased to discuss.
-
1 day11 USD
364 16 0 1 day11 USD
Good day !
I’m a novice, but I’ve already made the first form in CorelDraw+Solidworks.
I can provide a ready STL file. If necessary, it can be exported to a different format.
Turn to!
-
2 days22 USD
600 7 0 2 days22 USD
Good evening ! I get acquainted with the files and perform according to the requirements. I have experience in preparing models for 3D printing. Requirements for files I suggest to agree additionally.
-
2 days22 USD
126 2 days22 USD
Good day ! I can get to the project immediately after the discussion.
Google Drive
-
3 days33 USD
1531 40 0 3 days33 USD
I can perform/prepare the file for printing in the format stl, or in the format stp.
-
1 day11 USD
358 4 0 1 day11 USD
My greetings. Ready to perform.
Experience in work is.
Examples of portfolio.
Modeling in Compass 3D
Congratulations to Valentine.
-
2 days22 USD
238 1 0 2 days22 USD
Good day .
I will make the file needed for 3D printing.
I will be happy if you provide answers in the section "Discussions".
With respect,
by Alexander.
-
1 day11 USD
612 20 0 1 day11 USD
Welcome to.
I have experience in modeling and printing similar forms.
The example
HTTPS://freelancehunt.com/showcase/work/visichki-dlya-vipichki/1776758.html
I’m working at Blender.
The output will be the .blend .stl file.
…
If necessary, I can make exports in other formats.
-
2 days16 USD
452 14 3 2 days16 USD
I will make these formats for 3D printing and deliver STL files. The FreeCAD.
Duration: 1 to 2 days The price is 700 UAH.
The portfolio is here:
Freelancehunt
-
1 day11 USD
174 1 day11 USD
Good afternoon, let’s contact us in the telegram.
There are a few questions about the project.
-
фігура одна й та самеа але у різних розмірах?
-
Доброго дня.
А підкажіть, будь ласка, наступне:
1. контур у вигляді листя має дуже нерівний край. То так задумано? Бортик має бути таким же нерівним як зсередини, так і зовні?
2. Кут переходу від дна до бортика має бути зглаженим чи рівно 90 градусів?
3. На виході Ви хочете отримати STL-файл для відправки його на друк? Є якісь особливі вимоги до файлу від тих, хто буде друкувати? Наприклад, побажання що до наповнення? Цей показник зазвичай різний у кожного з користувачів 3Д-принтера.
-
І ще одне питання. На одній із сторінок маємо здвоєні 2 листка. Це також так треба?
-
Для яких цілей будуть використовуватись фігури?
Щось тут не те:
-Розмір 1 фігури 14х14 мм, 2 -32,5х29,6 мм. Потрібен масштаб.
- По таким кривим краях фігури не завжди можливо побудувати рівновіддалену лінію для стінки.
-
це форми для відливок якщо так то який буде матеріал для відливки щоб вибрати кут під яким буде розходиться стінки для зручності виймання
-
Current freelance projects in the category 3D Modeling
Photorealistic render of a model from Archicad in D5 RenderPhotorealistic render of the model from Archicad in D5 Render. This render needs to be refined to a photorealistic photo. Add the necessary surroundings on the site, furniture inside. Whatever is needed.It is mandatory to do this in D5 Render, so that it can be adjusted… 3D Modeling ∙ 9 hours 8 minutes back ∙ 6 proposals |
Backpack design*Backpack design: visualization and 3D model** Looking for a product designer or industrial designer with experience in accessories, bags, or gear. **What needs to be done:** — Develop the appearance of the backpack based on my references and wishes — Prepare high-quality… 3D Modeling, AI Art ∙ 1 day 22 hours back ∙ 7 proposals |
Designing parts (pads for a bag for 3D printing)
22 USD
A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 2 days 6 hours back ∙ 11 proposals |
Visualization of a chair
45 USD
There is a 3D model of a chair. Changes need to be made to the backrest and the fabric on the seat needs to be replaced. It should be made as similar as possible to the photo. I am attaching the photo. I will provide more detailed specifications with links to the fabric textures… 3D Modeling ∙ 3 days 8 hours back ∙ 48 proposals |
3D model of a "banana" bag with a die-cut handleTask: 3D model of a "banana" bag with a die-cut handle (for interactive mockup)1. Purpose A parametric 3D model of a polyethylene "banana" bag with a die-cut handle. The model will be used in a web viewer (Three.js / glTF) for an interactive mockup: the client's print layout is… 3D Modeling ∙ 3 days 8 hours back ∙ 3 proposals |
Kyiv