Image formation, topic charger

Four images need to be created in the styles shown in the samples. A detailed description is in the file. After the preparation of the samples is completed, there may be minor adjustments to the completed work. 

I will additionally write here in the description.

№1

What needs to be changed: 

1. In the text change "Built-in rechargeable battery

Capacity from 1 to 2 kWh (instead of 1 kWh)

2. Change the red lines to black (except for the one leading to the text "Built-in rechargeable battery…)

3. Leave the line leading to the text "Built-in rechargeable battery…" in red, only adjust the thickness to match the others 

4. Create a new line from the socket and add the text "Power source 220 V"

5. Where the text "PV input" is, make 

         PV input

for the solar panel

№2

What needs to be changed:

1. Where the text near the orange battery charging indicator is, leave only the text -

"Built-in rechargeable battery

Capacity from 1 to 2 kWh"

Remove the text "Nominal load from 1.5 to 2.4 kW

Peak load from 2.4 to 3.0 kW"

2. Increase the font size of the text "Built-in rechargeable battery

Capacity from 1 to 2 kWh"

3. Make the orange battery charging icon larger and change its color to red (it can be shifted to the right so it doesn't interfere with the text above) and make the arrow coming from the device point up and to the right

4. Where the text "Maximum power…" is, add the text "Standard load: 1.5 kW" between Maximum current and Voltage

5. Where the arrow "AC input" is, make another arrow in the opposite direction. These two arrows should come from the two left white sockets.

6. Slightly reduce the size of the 220 W icon and change W to V

7. Remove the text "Power source", leaving only 220 V

8. The arrow where "AC output" is should come from the 3rd and 4th white sockets

9. Add to the text "AC output" /connect to the distribution electrical panel in the apartment. It should look like this - AC output/connect to the distribution electrical panel in the apartment. 

To fit the text, the line can be shifted to the right

10. From the socket (black on the device) make an arrow down, add a picture of the socket and write the text "Additional power output 220 V"

№3

What needs to be changed:

1. Edit the text – Nominal load 1.5 kW

Peak load 2 kW

2. The arrow from the battery (orange) back and forth

3. Change the text "Battery pack" to "Power from additional external batteries"

4. Make arrows back and forth (point 3)

№4

What needs to be done:
1. No changes to the texts
2. Replace the icon with one marked where the text "Support for additional battery" is

3. Make the icons with sharp corners