Tank Model for 3D Printer
The only thing that is unusual is that the tank must be sprinkled with small crossroads. That is, the whole model should be like a silk with very small holes. It will look like a small network. As a result, I have to light a lamp on the model outside and the light must pass through the wall inside the model.P please start your message with the words: we make a tank. To understand that you have read the description. The model will be sexual inside, without the bottom, the thickness of the wall is such that it simply doesn’t go from touching. Length - 15-20 cm. Type of tank: any of the German, no matter what, for for now the prototype we do. It doesn’t burn on time, but if I’m ready to start, I’m ready to start too.
-
1 day11 USD
6988 99 0 1 day11 USD
We make a tank - "The tank must be sprinkled with small trail holes. That is, the whole model should be like a silk with very small holes. It will be like a small grid.” - There is no sense to make a model with small holes, the printer will not do them accurately. Take any model and drummer with a small scratch and just turn them up, it will be better.
-
2 days23 USD
128 2 days23 USD
Make a tank.
Ready to perform your task at an affordable price and in the shortest time.
-
7 days68 USD
1531 40 0 7 days68 USD
делаем танк:
а колеса-катки
ствол
гусеницы
тоже нужны? на них тоже отверстия? какие части не нужны?
На сколько частей разделять?
Какая плотность отверстий, диаметр отверстий?
-
7 days68 USD
1900 17 0 7 days68 USD
Делаем танк. Готов выполнить заказ, обращайтесь договоримся.
https://fixedfoxes1.artstation.com/
-
7 days113 USD
602 9 0 7 days113 USD
Добрый день, готов помочь с Вашим проектом
https://sergeyrubintsev.wixsite.com/gray-f/копия-3d-modeling
-
7 days158 USD
1510 33 0 7 days158 USD
Робимо танк
Пропоную свої послуги, є досвід з танками для друку.
Якщо цікавить пишіть в лс для уточнень
https://www.artstation.com/chip
-
3 days113 USD
1091 47 0 1 3 days113 USD
Робимо танк
Готовий з цим допомогти, але багато моментів тут треба конкретизувати. Пишіть, поговоримо.
-
2 days23 USD
3462 75 3 2 days23 USD
Делаем танк
Здравствуйте
Открыт к сотрудничеству
Выполню согласно ТЗ
Обращайтесь
-
і як ви збираєтеся друкувати "сіто"? чи не простіше буде просвердлити?
-
Не простіше.
Укладка пластику при друку, має свої особливості, тому отвори та інші елементи моделі мають бути закладені на етапі моделювання.
-
То есть вся модель должна быть как сито с очень мелкими отверстиями - і шо, ви таке друкували? 🤔
-
Сто раз так робив.
Внутрішній розмір модельки половинки 8 х 4 х 19, товщина стінки 1 мм
До того ж, надруковані завіси-защіпки.
Все працює.
-
це не сіто. це - якась клітка.
сіто ось таке
-
Найкраще це дремелем насверлити отвори і потім зачистити, дуже дрібні отвори принтер не зробить вони заповняться пластиком і це буде виглядати як дефект друку.
-
Current freelance projects in the category 3D Modeling
Project of a Sadhu board for a CNC machine
35 USD
Hello, I need to create a product project for a sadhus board for further laser cutting on a CNC machine. Material: wood, multilayer particle board. I will send the technical assignment in private messages. 3D Modeling ∙ 32 minutes back ∙ 4 proposals |
3D model of a cat on a braceletHello! The task is to create a 3D model based on a sketch, which will be printed on a photopolymer printer with a size of 20x10mm and will be worn on a cord bracelet. We have a reference image of the front side and a technical specification with details. There is no need for… 3D Modeling, Industrial Design ∙ 4 hours 31 minutes back ∙ 13 proposals |
Create a 3D model in STP format of a bicycle fender.
23 USD
The model is not very complex but has a curved geometry. There is a 3D scan and photos. Exact dimensions are not important, the main thing is the proportions. The model will be used for visualization in KeyShot. File format - only STP STEP 3D Modeling ∙ 6 hours 24 minutes back ∙ 17 proposals |
Designing a kitchen for the Levante restaurant (Germany)Looking for a specialist to develop the layout of a professional kitchen for the new Levante restaurant in the city of Backnang (Germany). Concept of the establishment: Lebanese restaurant with seating and a Take-away format. Main menu: shawarma, grilled dishes, kebabs, falafel,… 3D Modeling, Drawings & Diagrams ∙ 10 hours 59 minutes back ∙ 9 proposals |
3D model of a bed to specificationsA bed model is needed, specifically decorative elements (coat of arms, overlay, moldings, columns) for further manufacturing on a CNC machine. The output file can be any of the following: blend, max, 3ds 3D Modeling ∙ 1 day 8 hours back ∙ 17 proposals |
Zaporizhzhia