Budget: 100 UAH Deadline: 1 day
Здравствуйте!
Могу выполнить ваш заказ в програме AutoCAD.
За деталями обращайтесь; [email protected]
Budget: 100 UAH Deadline: 1 day
Здравствуйте!
Могу выполнить ваш заказ в програме AutoCAD.
За деталями обращайтесь; [email protected]
Budget: 300 RUB Deadline: 1 day
Здравствуйте!
Предлагаю 1 рубль за 1 размер.
Имеются ввиду только размеры, а не выноски, примечания, позиции и т.д.?
[email protected]
Budget: 100 UAH Deadline: 1 day
Здравствуйте!
Готов выполнить Ваше задание. Имею опыт работы в программе АutoCAD 5 лет.
Пишите, все детали обсудим.
Budget: 100 UAH Deadline: 1 day
Здравствуйте! моя основная работа проектирование железобетонных конструкций в AutoCad. Буду рад сотрудничеству.
Budget: 300 RUB Deadline: 1 day
Добрый день!
Могу выполнить, кошелек есть. Какие сроки и объем работы?
Мое портфолио - http://marieasat.wixsite.com/arch
063-142-08-24 [email protected]
С уважением, Мария Яворская
Budget: 1200 RUB Deadline: 1 day
Приветствую!
Готов обсудить детали и сотрудничать.
Нужно ознакомиться с подробным ТЗ (исходными данными), после чего смогу написать точнее цену и сроки.
Некоторые примеры работ:
sferra2012.weebly.com
Примеры ЭП раздела - Google Drive
Примеры АС раздела - Google Drive
Примеры ОВ,ВК разделов - Google Drive
Примеры ЭО разделов - Google Drive
Примеры чертежей интерьера - Google Drive
Skype - arhivad1
E-mail - [email protected]
Жду вашего ответа.
С уважением, Вадим,
sferra2012
Budget: 200 UAH Deadline: 1 day
Доброго дня. Готов взяться за ваш проект. Автокад в деятельности больше 10 лет.
Budget: 1500 RUB Deadline: 15 days
Готов приступить к работе над заданием, на связи 24/7. 15руб.=1л.А4.
Budget: 300 RUB Deadline: 2 days
Добрый день. Готова к сотрудничеству.
Цену и сроки согласуем.
Готова выполнить пробное задание.
Обращайтесь.
Budget: 100 UAH Deadline: 2 days
Здравствуйте. Готова к сотрудничеству. Обращайтесь
Пишите в личку
Budget: 270 UAH Deadline: 1 day
О ткрыт к сотрудничеству. Могу исполнить пробное задание. Давайте работать.
Budget: 100 RUB Deadline: 1 day
Мое почтение.
Цену и срок уточним при просмотре самого задания.
С ув. Виктор Николаевич.
Budget: 600 RUB Deadline: 1 day
Здравствуйте. Оплата и срок указаны условно. Пишите в личку - договоримся.
Budget: 20 RUB Deadline: 1 day
Здравствуйте. Готов выполнить Ваше задание качественно и в установленные сроки.
We are looking for a physicist engineer or a design engineer with experience in developing induction chargers, Qi/Qi2, and working in KiCad. We already have: a ready-made wireless charging board for two devices; two coils for charging a phone and headphones; the case design and 3D models. What needs to be done Add a third charging channel for Apple Watch. Select and calculate the coil, electronic components, and connection scheme. Resolve the issue of correct Apple handshake and compatibility with Qi/Qi2. Check if the system can stably charge three devices simultaneously. Calculate the required power of the power supply, heating, and main electrical parameters. Consider the shielding of the coils, as the charger is installed inside a wooden case. Prepare or refine the schematic and PCB in KiCad. Provide recommendations on design, safety, and further certification of the device. We are considering two work formats: full development and preparation of files; engineering consultation with calculations and recommendations that our specialist can implement. Please, when responding, write: whether you have experience with wireless chargers Qi/Qi2; whether you have worked with Apple Watch or MFi components; whether you can perform calculations for coils, power, heating, and shielding; attach examples of similar projects.
Planning options for a shower module for military use based on 20 and 40-foot shipping containers. Various combinations are available. This is an AI-generated photo; it needs to be adjusted and smart dimensions for walls, partitions, and overall sizes applied for further manufacturing.
Assembly Principle: Completely weld-free, exclusively using bolted connections (“NO-WELD BOLTED CONSTRUCTION”). The structure is modular (Flat-Pack) to minimize logistics costs and facilitate self-assembly by the customer. 1. TECHNICAL REQUIREMENTS AND AESTHETICS • Requirement for the developer: The product must be designed to have a flawless, presentable commercial appearance for export to the EU market. • Intuitive assembly: The design should allow for the simplest assembly possible, enabling the customer to assemble the box independently without special tools. • Frame material: Stainless steel AISI 304 (matte), sheet thickness — 1 mm. • Construction: Corner system with flanging for rigidity and safety. Stacking (nesting) during transportation. • Wall filling (sandwich): PIR board (30 mm) with a tolerance of ±4 mm. The groove design should compensate for this tolerance, eliminating gaps. • Wall cladding: PIR board is covered on both sides with smooth stainless steel sheets of 0.5–0.6 mm. • Assembly: Strictly with bolts (stainless steel A2/A4). Minimum number of bolted connections inside the working area for ease of cleaning and disinfection. • Feet: Height 30 mm, integrated into the lower binding contour. 2. DOOR CONSTRUCTION AND LOCKING • Sealing: Rubber seal around the entire perimeter of the reveal and a stop (false bar) for 100% elimination of gaps. • Hinges: Seat design that eliminates play (bolts serve only the function of clamping). • Locking: Mechanical latch lock “finger in hole”. • Door configuration: Doors spanning the full width and height of the facade, divided horizontally into two independent sections: upper and lower. ◦ Lower section: blind. ◦ Upper section: has a viewing window. ◦ Operating principle: The lower section opens first and, when closing, tightly presses against the upper section. • Viewing window (Product No. 1): Located in the upper section. Double-sided, with an air layer. Clamping strips for securing any transparent material (glass, plastic, or film) with a thickness of from 2 to 5 mm. 3. VENTILATION SYSTEMS (Identical for both products) • Protection: Mesh (stainless steel, wire 0.5 mm, cell 0.8 mm). Installation — through clamping frames with bolts (without drilling the mesh). • Upper exhaust (120 cooler): Cutout 200x200 mm in the roof, cooler installation through a flange with M4 thread. Under the cooler (above the mesh) — adjustable damper (shutter). • Lower intake: Two openings (left and right), raised 100 mm from the floor. Area of each — 300 cm². Both intakes have adjustable dampers (shutters). 4. PRODUCT SPECIFICATION • PRODUCT No. 1 (Vertical 600x600x1200 mm): Two-section doors (lower blind, upper with window). Equipment: lamp mounts, cable pass-throughs, mounts for IR film (on the wall), curtains for mesh suspension, strip for the shield from the end. • PRODUCT No. 2 (Horizontal cabinet 600x600x600 mm): Single-section doors without glazing. Equipment: lamp mounts, cable pass-throughs, mounts for IR film (on the wall), stainless steel guides for shelves, strip for the shield from the end. 5. WHAT IS REQUIRED TO BE DELIVERED: 1. 3D assembly: STEP / SolidWorks formats, with the ability to freely disassemble the model. 2. Drawings: Detailed drawings of assembly nodes. 3. Unfoldings: DXF format (considering the K-factor of bending). 4. Specification table (BOM): All stainless steel fasteners.
A gerber file is required to order a board based on the description; there is no schematic, part of the schematic (the PWM) will be drawn by hand. The set is very simple: a power stabilizer based on the ATmega 328, a 1602 display, and three buttons with a couple of small connectors.
Need a teacher with experience in online teaching who will demonstrate the use of AutoCAD from scratch to a group of students online. (Preferably - experience in the architectural field) Topics: Introduction to AutoCAD Basic drawing tools Editing drawings Layers and object properties Hatching and formatting Text and tables Dimensions Blocks and attributes External references and drawing organization Preparing drawings for printing Practical work Final project Conditions: 700 UAH/hour. Online, on weekdays, evening time from 18:00