Budget: 250 USD Deadline: 7 days
Good day.
I am ready to start the project.
Please send the specifications.
Need a design for three bathrooms within a week, the project must be completed.
Short brief:
First bathroom with a bathtub, shower, toilet, and sink, all dimensions in inches and feet
Second bathroom with a shower, toilet, and sink
Third bathroom is a small bathroom with only a sink and toilet
The quality of the photos should be at the level of the photos I posted below
Each bathroom should have three angles: the first angle from the side of the sink, the second angle from the sink to the toilet, and the third angle from the shower or from above the ceiling
It should be taken into account that there will be changes as clients may change either the tiles, the sink, or the lighting
It is preferable that the work is done within a week or earlier
Information will also be provided with tile photos, sink with wall tiles, as well as what faucets and what colors the faucets will be, and also the toilet.
At the end of the work, I also need a photo of the exact dimensions of the sink and how the tiles are laid on the floor
Budget: 250 USD Deadline: 7 days
Good day.
I am ready to start the project.
Please send the specifications.
Budget: 250 USD Deadline: 3 days
Good day.
I am ready to complete your order. You will think of me in these bathrooms.
Budget: 250 USD Deadline: 7 days
Good afternoon, I will gladly complete your task, examples of my work are in my profile.
Budget: 400 USD Deadline: 10 days
Good day, I have experience in creating such projects, I am ready to complete your task quickly and efficiently.
Budget: 250 USD Deadline: 6 days
Good afternoon, I can design three bathrooms according to the specifications, my portfolio is here Behance
I would be happy to collaborate.
Budget: 250 USD Deadline: 3 days
Hello. I specialize in bathroom design. I collaborate with a company that manufactures plumbing fixtures, so I can provide examples of completed design projects in private. I am available for work and can start immediately. The number of revisions is unlimited. I look forward to collaborating :)
Budget: 250 USD Deadline: 7 days
Good day, Chris Hason.
We are engaged in architectural and design projects, visualization.
We have over 10 years of practical experience in architecture.
We do everything professionally and with quality. We have wonderful visualizations for you.
Feel free to reach out.
Portfolio:
https://freelancehunt.com/showcase/work/vannaya/1114128.html Freelancehunt
Budget: 250 USD Deadline: 7 days
Good afternoon, I am ready to work on your project,
A lot of experience
We can discuss all the details, revisions in 3 rounds
Budget: 250 USD Deadline: 7 days
Good day, I will create a realistic design, the cost includes several free revisions, and I will also provide you with drawings for tile laying and their quantity.
Budget: 250 USD Deadline: 7 days
Good afternoon. I am ready to start immediately after agreement, I will do it quickly and efficiently.
Example of my work Behance
Budget: 250 USD Deadline: 2 days
Good afternoon! I am ready to complete the project. I will replicate the quality and angles exactly.
Budget: 250 USD Deadline: 4 days
Good day! I am interested in your project. I will create a stylish design and high-quality visualizations. Portfolio in the profile. Feel free to reach out, we will discuss in detail.
Budget: 250 USD Deadline: 4 days
Good day!
I am ready to complete the assigned task in a short time.
I work in 3dsMax and Corona Render.
I have extensive experience in interior visualization. Part of my projects can be found at the link Google Drive
I am ready to start working today.
Budget: 250 USD Deadline: 3 days
Good day!
I was interested in your offer - and I am ready to take on the task.
I have experience in interior visualization of bathrooms, you can check examples of my work here - Behance
Best regards, Bohdan
Budget: 250 USD Deadline: 7 days
Good afternoon. I am ready to create visualizations efficiently and on time. You can view my work here: Behance
Budget: 250 USD Deadline: 7 days
Good day. I will complete your project quickly and efficiently.
My works Behance
Budget: 250 USD Deadline: 7 days
Good day!
My name is Sofia, I am an architect-designer.
I am ready to help you.
We can discuss in more detail in private messages about the work process and my experience in the field of architecture and design.
You can view my works here: Behance
Sincerely, designer Sofia!
Budget: 300 USD Deadline: 5 days
Ready to take on the project.
Portfolio - Freelancehunt
Write to me, we will discuss all the details in more detail and get started on the work.
Budget: 350 USD Deadline: 5 days
Good afternoon, I offer my services for design development and 3D visualizations. You will receive visualizations and drawings with dimensions of tiles/bathtubs, etc. Portfolio - Behance Best regards, Nikolai.
Budget: 250 USD Deadline: 7 days
Good morning!
I offer my services to complete your task.
The first visualizations in 2 days, the remaining time for adjustments if necessary.
Ready to proceed.
Sincerely, Iryna.
Budget: 275 USD Deadline: 7 days
Good afternoon. I am ready to create 3D visualizations of toilets for you. I can also provide the dimensions of the sink and the layout of the tiles.
Some of my works: Freelancehunt
I look forward to collaborating!
Budget: 500 USD Deadline: 5 days
Hello!
I am ready to start working, I will wait for the provided technical specifications with pictures and wishes. I will complete it as quickly as possible and at a high level)
Have a nice day
Budget: 250 USD Deadline: 5 days
Good afternoon! I am ready to complete the project for you! Feel free to reach out to discuss the details! Some of my projects: Behance
Budget: 250 USD Deadline: 7 days
Chris, good afternoon!
I am ready to complete your project.
There are similar examples in my profile.
Feel free to reach out, we will discuss everything in more detail.
Best regards, Anastasia
Budget: 250 USD Deadline: 7 days
Good day. I am glad to complete your project. I will provide the necessary drawings and visualization.
Budget: 250 USD Deadline: 7 days
Hello. I am ready to create visualizations, drawings with dimensions, and the layout direction of the tiles on the floor. For more detailed discussion, please write in private messages.
Budget: 250 USD Deadline: 7 days
Good afternoon! I can develop the design, create visualizations, and make the necessary drawings. Details in private messages.
Budget: 250 USD Deadline: 7 days
Hello, my name is Yulia
I am ready to complete your project today
Budget: 250 USD Deadline: 7 days
Good afternoon.
I offer my services in implementing your project.
Budget: 250 USD Deadline: 7 days
Good afternoon.
Experience of over 12 years. I would be happy to design restrooms. Cost 250 USD.
I guarantee the quality and deadlines of my projects. Feel free to reach out, we will discuss everything.
My portfolio Behance
Sincerely, Ovcharenko Vitaliy
Budget: 550 USD Deadline: 7 days
Hello, Chris!
I am ready to develop the design of the bathrooms. I have experience in similar work.
Freelancehunt
The cost and deadlines are approximate.
I invite you to discuss all the details in private.
Feel free to reach out!
Budget: 400 USD Deadline: 5 days
Good day
I developed furniture (cutting and design for production)
I made a presentation. Furniture for a German website.
I can share the presentation. Technical documentation, presentation in different colors.
I also did bathrooms for yachts. If luxury style. The work will cost $400
Budget: 250 USD Deadline: 7 days
Hello, Chris!
I will complete the design, visualizations, as well as the required drawings for the bathrooms.
Examples of my work - Behance
A person is needed who can work with 3D animation. Task: recreate a 3D image on a face of a similar nature and then overlay this on "Before" and "After," as a result of transformation after the procedure. Important: to do it manually (NOT AI), own idea and interpretation.
1. General GoalCreate a dynamic interface element based on the provided template, consisting of three angles of a cup (Front cup, Back view, Side view). When clicking on any print option, the image must change simultaneously and synchronously on all three cups considering the angle, volume, light, and shadows for each position. 2. Output File Requirements (For Designer / PSD Template)The basic layout must be prepared in PSD format. To automate and facilitate print replacements, the structure should be based on linked smart objects (Linked / Duplicated Smart Objects).Main requirement for PSD architecture: The layout must have one master smart object with the print layout. The designer duplicates it for three angles, but applies individual transformations to each duplicate: For the front cup: Print deformation at the center (Transform -> Warp or Cylinder). For the back view: Texture shift (showing the reverse side of the layout) + cylinder deformation. For the side view (near the handle): Texture shift to the edge + stronger perspective compression closer to the handle.Layer structure for each of the 3 angles: Group "Shadows & Highlights" (Top layer of the angle): Individual for each angle. Highlights: Layer with glossy reflections. Mode: Screen or Linear Dodge. Shadows: Layer with a gradient that defines the cylindrical volume. Mode: Multiply. Layer "YOUR PRINT" (Duplicated Smart Object): Has individual deformation and shift settings for the specific angle. Layer "Cup Base" (Base of the cup): Body, handle, and inner part at their angle. Layer "Global Shadow": Shadow on the surface under each cup.Note for the designer: When saving a new design inside the master smart object, the print must automatically and correctly update on all three angles of the cup in PSD. 4. Behavior Logic and Animation
Quality visualization of an apartment is needed, 3d max, corona render, according to the technical specifications, with an area of 170 m2, in a modern style, deadline - 1 month, cost 6$/m2.
Technical Assignment (TA) for Freelancer Order Title: Translation of a flat drawing into engineering 3D format STEP (.step) with modifications to the wing for laser engraving. Task Description: Hello! I need to convert a finished black-and-white image of a character (outline drawing of the Charizard dragon) into a solid 3D CAD model in STEP (.step / .stp) or IGES (.iges / .igs) format. The file will be used in production in Finland for laser engraving on the bottom of a graphite mold for metal casting. Technical Requirements for the Model: Output Format: Strictly a CAD model in .step or .iges format (polygonal mesh like STL or OBJ is not suitable; the machine needs a solid body). Dimensions of the Area for the Drawing: Strictly 90 x 40 mm (this is the internal size of the bottom of the mold). Orientation: Vertical (the drawing should be elongated along the long side of 90 mm). Depth of Engraving (Extrusion): The outline of the drawing must be recessed (extruded) to a depth of 2.0 mm (acceptable range 1.5–2.5 mm). Detailing: All internal contours (flame, scales, face) need to be carefully transferred so that the laser machine reads them correctly and they flow clearly in the metal. Mandatory Corrections to the Drawing (what needs to be fixed): Redraw the Right Wing: In the original picture, the right (from the viewer's perspective) wing is cut off by the edge of the frame. It needs to be completely redrawn (made whole, open, and symmetrical to the left wing). Scaling and Centering: The dragon itself needs to be slightly reduced in size so that all elements (both wings, tail, flame from the mouth) fit completely within the rectangle of 90x40 mm and do not touch its edges. Make a neat uniform margin from the borders on all sides. The original image is attached to the order (file 78815_3.png). Please indicate your deadlines and cost. Payment will be made in currency (via PayPal). Thank you!
Hello, I am contacting you in reference to your profile and extensive portfolio in prototyping and CAD documentation. I run an interior finishing and installation company and I am currently looking for an experienced furniture constructor / technologist to cooperate with on custom, non-standard projects. To start, I would like to commission a pilot project. The design is highly specific and structurally demanding – I need professional engineering verification and the preparation of production files for an external CNC factory. Here are the technical assumptions for the under-stair closet I am building: Space: A niche with a width of approx. 374 cm, height of 254 cm, and an unusual depth of exactly 100 cm. Movement concept: The closet consists of 5 independent, full-size modules (boxes) that slide completely out of the niche into the hallway. The tops of the modules are cut at an angle to match the staircase. Mechanics and load distribution: At a depth of 100 cm, a fully loaded box will be extremely heavy. Therefore, I want to use a "container" logic: 100% of the weight of each module must rest on bottom-mounted, heavy-duty polyurethane wheels hidden behind a plinth. The side drawer runners must not carry any weight – they are to be used strictly to stabilize the sliding track. Material: The entire structure will be made of plywood (I am tentatively assuming an 18 mm thickness for the frames, module bodies, and structural shelves to ensure absolute rigidity). What I need as part of this commission: 1. Engineering verification of the concept (confirming material thickness, determining necessary assembly clearances between modules). 2. Selection of appropriate hardware (specific models of heavy-duty wheels and suitably long stabilizing runners). 3. Generation of assembly drawings (for my installation process). 4. Preparation of a Bill of Materials (BOM) and ready-to-use vector files (DXF/STEP) including drill holes, which I will send directly to my partnering CNC plywood factory. I have attached my preliminary sketches and dimensions to this email. Please let me know if you are able to take on this project and provide an estimated quote for preparing the complete manufacturing package. Best regards, Mirek