Budget: 0 EUR Deadline: 15 days
Добрый день, готов сотрудничать, портфолио- http:// Behance
mail: [email protected]
Budget: 0 EUR Deadline: 15 days
Добрый день, готов сотрудничать, портфолио- http:// Behance
mail: [email protected]
Budget: 1 EUR Deadline: 1 day
Сделаю! Если вы в Киеве, помогу с печатью! (работаю в полиграфии)
некоторые работы можете увидеть здесь:
http://0639579770.hambr.com/
Обращайтесь!
тел. 063 957 97 70
[email protected]
Budget: 2360 USD Deadline: 5 days
Логотип в трех вариантах от 800 $
Буклет от 400 $
Плакат от 1000 $
Баннер от 160 $
Budget: 80 USD Deadline: 4 days
Здравствуйте! Готов приступить к разработке.
Портфолио - http://ayum65.wix.com/andrewportfolio
Контакти:
mail - [email protected]
tel. - 0933735336
skype - ayumi_ua
Budget: 0 USD Deadline: 5 days
Budget: 0 EUR Deadline: 2 days
Готовы сотрудничать, есть все необходимые профессиональные навыки и опыт работы, выполняем работу в срок.
Наше портфолио: www.makenow.com.ua
Budget: 0 EUR Deadline: 1 day
Мое портфолио http://mobikdesign.in.ua/
Пишите, о цене договоримся.
Budget: 0 EUR Deadline: 20 days
Здравствуйте,
Если речь идет о серьезной работе.
[email protected].
Портфолио в профиле.
Budget: 0 EUR Deadline: 4 days
Буду рад помочь. Если нужен действительно качественный результат - пишите. Креатив и адекватность гарантирую. Работаю только по частичной предоплате
Портфолио: http://surricen.foliohd.com/all
Почта: [email protected]
Budget: 0 EUR Deadline: 1 day
Готова взяться за проект.
Делаю работу качественно.
Моя почта [email protected]
Часть моего портфолио в профиле
http:// Freelancehunt
По просьбе предоставлю полное портфолио.
Budget: 0 EUR Deadline: 7 days
Готов выпоолнить
It is necessary to design solar stations on a permanent basis - both large and small. Layout of panels, calculation of generation in PV syst, selection of main and electrical equipment (this is preferable).
It is necessary to design a cabinet with two drawers for the bathroom. White color. The drawers should have soft-close mechanisms. We will assemble it ourselves. The cabinet stands on legs.
Develop for two devices: general assembly drawing of the metal frame; general assembly drawing of the service platforms; detailed drawings of ladders; detailed drawings of railings; detailed drawings of equipment supports; specification of metal products; St3 or 09g2s As a result of the design, it is necessary to obtain: 3D model of the frame. General assembly drawing. Specification of metal products. Calculation of the load-bearing capacity of the structure (will be a plus). Description of the device:ParameterValueType of deviceVertical reactor with a stirrerWorking volume2.0 m³Total volumeabout 2.36 m³Body diameterabout 1500 mmHeight of the deviceabout 4265 mmBody materialSteel with enamel coatingType of stirrerAnchorStirrer rotation frequencyabout 85 rpmHeat carrierThermal oil
Development of a mechanism for alternating the flipping of plastic cupsProject Goal It is necessary to develop only the mechanism for flipping plastic cups "every other one" for an automatic production line. The device must ensure the following sequence: 1st cup — without flipping (0°) 2nd cup — flip 180° 3rd — without flipping 4th — flip 180° and so on. As a result, the output should produce the sequence: 0° → 180° → 0° → 180° → ...What is already available The cups move along the conveyor in a single row. Before the mechanism, all cups have the same orientation (lid up). Only the flipping unit needs to be developed.Proposed Operating Principle The following scheme is considered: A dividing screw synchronizes the flow of cups. All cups gradually rotate to the position of 90°. Then, the cam mechanism acts only on every second cup. Every second cup returns from the position of 90° back to 0°. The others continue rotating to 180°. As a result, we get: 0° 180° 0° 180° If the performer offers a simpler, more reliable, or more technological solution — we are ready to consider it.Requirements1. Develop a complete 3D model in SolidWorks It is necessary to model: dividing screw; flipping mechanism; cams; guides; shafts; mountings; all necessary parts.2. Perform kinematic verification It is necessary to ensure that: the mechanism operates without jamming; there are no intersections of parts; the cups are flipped correctly; the mechanism is suitable for manufacturing.3. Conduct Simulation / Motion Study It is necessary to perform an animation of the mechanism's operation in SolidWorks Motion. It should be visible: the movement of the cups; the rotation of parts; the sequence of flipping every second cup.Work Result The performer must provide: source files SolidWorks (*.SLDPRT, *.SLDASM); assembly; Motion Study; animation video; STEP file of the assembly; drawings of the main parts.