- Projects -
- Rating -
- Rating 211
Budget: 1500 UAH Deadline: 2 days
Good day ! You are ready to make a planning solution for your apartment. I can continue to work up to a full design-project with all the quarters and visualization. Go to turn!
Examples of work Behance
Budget: 1000 UAH Deadline: 1 day
Good day, we will discuss your wishes, and if we can all place in your apartment - great, if not - we will work together on such an option that will perfectly fit you.
If there is no desire to do a full-fledged design project, we can work gradually.
Work on the link - Behance
Budget: 3000 UAH Deadline: 3 days
Hi, I work at Revit 2023, I have experience in planning. I will perform the work according to your wishes.)
Budget: 1000 UAH Deadline: 2 days
Good day .
Ready to help you.
An example of my apartment planning is similar to yours:
HTTPS://ibb.co/5s5qYc
I can also make a 3D visualization.
Examples of work are in my profile on this site.
Go to turn!
Budget: 1700 UAH Deadline: 4 days
We have been doing such projects for many years.
They can offer re-planning options for your needs, based on the materials of the premises in the apartment. It will be interesting!
- Projects 9
- Rating 5.0
- Rating 1 588
Budget: 2500 UAH Deadline: 5 days
Good day Polina!
Experience more than 10 years. I will be happy to plan the apartment. The cost of planning is 2500 UAH. by m2. The cost of the design project is 450 UAH. by m2
The design project includes 3D visualization of all rooms, a full package of drawings for builders.
My website is Behance
With respect, Vitaly
Budget: 200 UAH Deadline: 5 days
Hello to Polina!
I make a thoughtful and functional planning for life taking into account your vision. Planning decision – 150 UAH. for the Q. I will be happy to help with the full package of drawings and further setup.
We need accurate measurements on the site.
Budget: 3690 UAH Deadline: 9 days
The apartment is 47 m2. m. needs a very skillful work in planning, otherwise...)))) You live there.... Get glad I will help
Budget: 10000 UAH Deadline: 10 days
Good Morning, Pauline
I have great experience in design and construction. I do the work of any complexity. I’m not an artist, I’m an engineer. That’s why I’ll be able to develop for you planning solutions, optimally between what you want, what you can and how it will be the most ergonomic. In the future, I can help with the realization of the construction: select a brigade, control the performance of the works, etc.
If you are troubled by the cost - contact us, we will find the optimal solution for both sides.
Budget: 18800 UAH Deadline: 14 days
Good day !
First of all, it is worth making measurements on the site, since usually the actual sizes differ from what is planned in the building.
Ready to go to the object to fix accurate sizes and develop a design project taking into account your needs. The price of all necessary crossing is 400 UAH/m2.
Examples of project design Google Drive
If necessary, I can make a realistic 3D visualization and together with you choose materials for decoration and furniture.
Write in a private message. Let’s talk about details.
Budget: 2000 UAH Deadline: 2 days
Polina, hello to you!
I’ve attracted your task, as the ergonomics of the apartment, the planning – the re-planning of my coat.
I will respect all your wishes and improve properly!
Portfolio: Freelancehunt
With respect, Alexander
Budget: 800 UAH Deadline: 20 days
Welcome to! I can make a full design project for you.
Portfolio: Behance
Budget: 5000 UAH Deadline: 5 days
Good afternoon. I will make the planning of the apartment (I will process your plan) with the layout of furniture and equipment. to turn.
Budget: 1000 UAH Deadline: 1 day
Good day, I will be glad to help you!
Ask for everything we agree.
My examples of different planning: Google Drive
Dmitro I.
Winning proposal- Projects 56
- Rating -
- Rating 1 087
Budget: 500 UAH Deadline: 3 days
Good evening .
I can prepare the graphic part in 2D as according to your instructions, so ready to submit my suggestions.
I can suggest you to prepare such letters in advance:
- Dimensional drawing (the room plan based on your variables/tp);
The dismantling plan of premises;
Planning of the towns;
Planning decision (your option, your proposal)
- Plan of layout of the main furniture and sandwich equipment and the explanation of the rooms;
Scheme of opening doors;
Plan of placing roses;
Planning the locations of the switch;
a plan of gender;
The time and amount indicated for the described.
I hope for feedback.
Budget: 2000 UAH Deadline: 10 days
Good evening, I can help you plan everything and choose it right. I will be happy to cooperate.
- Projects 9
- Rating -
- Rating 436
Budget: 3500 UAH Deadline: 3 days
Good day Polina!
My name is Alexey, I'm very interested in your project, I'm happy to start implementing it.
I am a designer and I have a great experience of 6 years.
I have hundreds of projects.
Ready to discuss details and price.
I'm always in contact, please contact me.
The visualization: Google Drive
The portfolio: Google Drive
If you were interested in my proposal, write. I will be happy to work with you!
Budget: 1500 UAH Deadline: 2 days
Good evening ! Ready for the work! I have enough experience! Ready to give examples of work!)
Proposals concealed
Proposals are currently absent
-
Yura Slabko 24 October 2022Доброго дня, трошки не моя специфіка, але для початку треба заміряти те зробив забудовник....бо по факту там цих розмірів не буде...
Current freelance projects in the category Drawings & Diagrams
“Good day! I need to develop a drawing of a machine (device) for stitching sheets of agricultural crops. I will provide photos and video materials. Main requirements for the project: Simplicity of design: The machine should be as simple as possible to manufacture and assemble. It is preferable to use readily available materials that can be easily purchased. I understand that some parts will still need to be made individually (custom-made). There are no obstacles with shaping (bending) sheet metal and welding work. Reliability and minimal maintenance. Desired power supply is 220 V. However, I leave the final decision to you — as specialists, you know better which option will be better and easier to implement. Below, I am adding videos with examples of similar machines, as well as videos of similar devices for stitching brooms — perhaps some design solutions can be borrowed from there for our project. Have a great day, I look forward to your proposals!” https://youtube.com/shorts/rT6q4pa_VSY?si=_6iCZLlPV0YXvtUo https://youtu.be/V9nMWLxpIbA?si=xfFpMIFf6qxE0WRB
Output data: Existing building: single-story office building; structural scheme — frame-less brick; external walls thickness 380–640 mm; internal load-bearing walls thickness 380–510 mm; ceilings — precast reinforced concrete hollow-core slabs; foundations — columnar with FBS blocks; approximate dimensions of the building — 40.34 × 28.84 m; building area — about 747 m². Planned: dismantling of the existing rafter system and roof; addition of a second floor with glued laminated timber structures; installation of a new wooden roof structure; reconstruction of the existing building with partial changes in loads on load-bearing structures.Required to perform: Analysis of the provided technical report on the building inspection. Verification calculation of existing foundations, walls, and ceilings for the perception of additional loads from the addition. Development of structural solutions regarding: installation of reinforced belts; strengthening of brick walls; strengthening of foundations (if necessary); ensuring spatial rigidity of the building; nodes for load transfer from glued laminated timber structures to the existing building. Calculation and justification of the adopted solutions. Issuance of a set of drawings for the stages of KB/CM/KZ (depending on the adopted solutions). Consulting support during the development of wooden structures and implementation of the project.Output documentation: Scientific and technical report on the building inspection. Measurement drawings. Architectural solutions for the addition. Preliminary concept of glued laminated timber structures.Requirements for the contractor: availability of a design engineer certificate in terms of ensuring mechanical resistance and stability; experience in the reconstruction of existing buildings; experience in designing the strengthening of brick or stone buildings; preferred experience working with additions of wooden structures or glued laminated timber.Message text for Freelancehunt Good day. We are looking for a designer to participate in the project of reconstructing an existing single-story brick office building with a subsequent addition of a second floor made of glued laminated timber. It is necessary to take on the development of structural solutions regarding: reinforced belts; strengthening of existing brick walls; if necessary — strengthening of foundations; ensuring spatial rigidity of the building; load transfer from new wooden structures to the existing building. A technical inspection of the building and measurement drawings have been completed, which will be provided to the contractor after preliminary discussion of the project. Preferred experience: reconstruction of existing buildings; development of solutions for strengthening stone or brick structures; work with additions or wooden structures. Please include in your response: a brief overview of your experience; examples of similar completed projects; available certificates; estimated budget and timelines for the work. We are ready for long-term cooperation on similar projects.
We are looking for a physicist engineer or a design engineer with experience in developing induction chargers, Qi/Qi2, and working in KiCad. We already have: a ready-made wireless charging board for two devices; two coils for charging a phone and headphones; the case design and 3D models. What needs to be done Add a third charging channel for Apple Watch. Select and calculate the coil, electronic components, and connection scheme. Resolve the issue of correct Apple handshake and compatibility with Qi/Qi2. Check if the system can stably charge three devices simultaneously. Calculate the required power of the power supply, heating, and main electrical parameters. Consider the shielding of the coils, as the charger is installed inside a wooden case. Prepare or refine the schematic and PCB in KiCad. Provide recommendations on design, safety, and further certification of the device. We are considering two work formats: full development and preparation of files; engineering consultation with calculations and recommendations that our specialist can implement. Please, when responding, write: whether you have experience with wireless chargers Qi/Qi2; whether you have worked with Apple Watch or MFi components; whether you can perform calculations for coils, power, heating, and shielding; attach examples of similar projects.
Planning options for a shower module for military use based on 20 and 40-foot shipping containers. Various combinations are available. This is an AI-generated photo; it needs to be adjusted and smart dimensions for walls, partitions, and overall sizes applied for further manufacturing.
Assembly Principle: Completely weld-free, exclusively using bolted connections (“NO-WELD BOLTED CONSTRUCTION”). The structure is modular (Flat-Pack) to minimize logistics costs and facilitate self-assembly by the customer. 1. TECHNICAL REQUIREMENTS AND AESTHETICS • Requirement for the developer: The product must be designed to have a flawless, presentable commercial appearance for export to the EU market. • Intuitive assembly: The design should allow for the simplest assembly possible, enabling the customer to assemble the box independently without special tools. • Frame material: Stainless steel AISI 304 (matte), sheet thickness — 1 mm. • Construction: Corner system with flanging for rigidity and safety. Stacking (nesting) during transportation. • Wall filling (sandwich): PIR board (30 mm) with a tolerance of ±4 mm. The groove design should compensate for this tolerance, eliminating gaps. • Wall cladding: PIR board is covered on both sides with smooth stainless steel sheets of 0.5–0.6 mm. • Assembly: Strictly with bolts (stainless steel A2/A4). Minimum number of bolted connections inside the working area for ease of cleaning and disinfection. • Feet: Height 30 mm, integrated into the lower binding contour. 2. DOOR CONSTRUCTION AND LOCKING • Sealing: Rubber seal around the entire perimeter of the reveal and a stop (false bar) for 100% elimination of gaps. • Hinges: Seat design that eliminates play (bolts serve only the function of clamping). • Locking: Mechanical latch lock “finger in hole”. • Door configuration: Doors spanning the full width and height of the facade, divided horizontally into two independent sections: upper and lower. ◦ Lower section: blind. ◦ Upper section: has a viewing window. ◦ Operating principle: The lower section opens first and, when closing, tightly presses against the upper section. • Viewing window (Product No. 1): Located in the upper section. Double-sided, with an air layer. Clamping strips for securing any transparent material (glass, plastic, or film) with a thickness of from 2 to 5 mm. 3. VENTILATION SYSTEMS (Identical for both products) • Protection: Mesh (stainless steel, wire 0.5 mm, cell 0.8 mm). Installation — through clamping frames with bolts (without drilling the mesh). • Upper exhaust (120 cooler): Cutout 200x200 mm in the roof, cooler installation through a flange with M4 thread. Under the cooler (above the mesh) — adjustable damper (shutter). • Lower intake: Two openings (left and right), raised 100 mm from the floor. Area of each — 300 cm². Both intakes have adjustable dampers (shutters). 4. PRODUCT SPECIFICATION • PRODUCT No. 1 (Vertical 600x600x1200 mm): Two-section doors (lower blind, upper with window). Equipment: lamp mounts, cable pass-throughs, mounts for IR film (on the wall), curtains for mesh suspension, strip for the shield from the end. • PRODUCT No. 2 (Horizontal cabinet 600x600x600 mm): Single-section doors without glazing. Equipment: lamp mounts, cable pass-throughs, mounts for IR film (on the wall), stainless steel guides for shelves, strip for the shield from the end. 5. WHAT IS REQUIRED TO BE DELIVERED: 1. 3D assembly: STEP / SolidWorks formats, with the ability to freely disassemble the model. 2. Drawings: Detailed drawings of assembly nodes. 3. Unfoldings: DXF format (considering the K-factor of bending). 4. Specification table (BOM): All stainless steel fasteners.