3D models are needed for printing (case for a humidifier)
3D models are needed for printing (case for a humidifier); this is a reference, but it needs to be improved in terms of symmetry because the upper part in the picture is not symmetrical, and neither is the lower part.
1. General description
Develop a 3D model of a decorative case for 3D printing (FDM / SLA), intended for:
- internal RGB LED lighting
- ultrasonic humidifier with a membrane Ø25 mm
The case should be oriented for desktop use (gaming / desk setup).
2. Dimensions and proportions
- Overall height of the product: 160 mm
- Maximum width (diameter): 95 mm
- Height of the lower base: 35 mm
- Height of the transparent case: 125 mm
3. Shape and style
- Overall shape: symmetrical polyhedral crystal
- Style: low-poly / faceted
- The surface consists of clear geometric facets
- No organic or rounded shapes
- The top is flat, without distortions
- Central hole for steam outlet
4. Case construction
The case consists of two parts:
4.1 Lower base:
- Wall thickness: 3 mm
- Placement: electronics, RGB LED, membrane driver
- Hole for ultrasonic membrane: at the center of the upper part of the lower base Ø25.2 mm
- Holes for M3 screws (4 pcs)
4.2 Upper case:
- Transparent
- Wall thickness to allow LED light to pass through
- It can be removed and placed on the lower base, meaning it should be easy to take off and put on
6. Steam channel
- Steam outlet hole: Ø10 mm at the center of the upper case
8. Control and ports
- Power: USB-C
- Hole for the port at the back of the lower base
- Control button: 2 pcs (just holes for 10 mm buttons)
10. File format
- Main: STL
-
3 days100 USD
2271 10 0 3 days100 USD
Good day!
I am ready to develop a 3D model of the housing for the humidifier based on the provided reference, with improved geometry and full symmetry of the upper and lower parts.
You will receive:
a symmetrical low-poly housing in a faceted style without distortions;
a model adapted for FDM / SLA 3D printing;
… a two-component design (lower base + translucent upper housing);
correct mounting points for a Ø25 mm membrane, USB-C, and buttons;
optimal wall thickness for RGB backlighting;
a central steam outlet channel Ø10 mm;
a final STL file ready for printing.
Price: 4,500 UAH
Deadline: 2–5 days
-
2 days45 USD
373 2 days45 USD
Good day, I can do this work.
Corrections as desired, etc.
Write to me.
-
5 days156 USD
999 7 0 5 days156 USD
Hello, I work as an engineer in the program Fusion 360.
An interesting order, I can complete it. The deadline is up to 5 days, the price is 150 USD.
-
4 days100 USD
955 2 0 4 days100 USD
Hello, I offer my services as a specialist and will be happy to work with you. I have been working in 3D for 3 years and have experience in product design and game model design. I will do everything according to your instructions and if needed, I will calmly make corrections. My works are here:
Freelancehunt
-
5 days241 USD
1064 17 0 5 days241 USD
Hello!
I will make a crystal case with all the equipment in CAD SolidWorks.
Some examples from the portfolio —
Google Drive
-
7 days156 USD
3405 75 3 7 days156 USD
Hello
Open to collaboration
I will perform quality work according to the terms of reference
Feel free to contact me
-
7 days268 USD
6755 77 0 1 7 days268 USD
Hello. I am ready to complete your task. Write to discuss all the details.
-
3 days67 USD
1395 11 0 3 days67 USD
Hello. I can complete your task. I work in SolidWorks. I have experience in creating 3D models for printing.
-
3 days45 USD
2896 53 0 3 days45 USD
Current freelance projects in the category 3D Modeling
Photorealistic render of a model from Archicad in D5 RenderPhotorealistic render of the model from Archicad in D5 Render. This render needs to be refined to a photorealistic photo. Add the necessary surroundings on the site, furniture inside. Whatever is needed.It is mandatory to do this in D5 Render, so that it can be adjusted… 3D Modeling ∙ 2 hours 49 minutes back ∙ 4 proposals |
Backpack design*Backpack design: visualization and 3D model** Looking for a product designer or industrial designer with experience in accessories, bags, or gear. **What needs to be done:** — Develop the appearance of the backpack based on my references and wishes — Prepare high-quality… 3D Modeling, AI Art ∙ 1 day 16 hours back ∙ 7 proposals |
Designing parts (pads for a bag for 3D printing)
22 USD
A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 2 days back ∙ 11 proposals |
Visualization of a chair
45 USD
There is a 3D model of a chair. Changes need to be made to the backrest and the fabric on the seat needs to be replaced. It should be made as similar as possible to the photo. I am attaching the photo. I will provide more detailed specifications with links to the fabric textures… 3D Modeling ∙ 3 days 2 hours back ∙ 48 proposals |
3D model of a "banana" bag with a die-cut handleTask: 3D model of a "banana" bag with a die-cut handle (for interactive mockup)1. Purpose A parametric 3D model of a polyethylene "banana" bag with a die-cut handle. The model will be used in a web viewer (Three.js / glTF) for an interactive mockup: the client's print layout is… 3D Modeling ∙ 3 days 2 hours back ∙ 3 proposals |
Ternopol