A 3D model of an RC bait boat for fishing is needed for 3D printing.
Approximately like on this website:
https://breakawaytackleusa.com/products/rc-bait-boat-with-fish-finder/
It does not have to be an exact copy, the main thing is that the shape is similar. The model is needed for the Bambu Lab 3D printer.
The hull should provide space for two motors, a battery, and electronics, as well as a rear compartment for bait. It is preferable that the hull is divided into several parts for printing, so that it can be assembled later.
Post your project for free and start receiving proposals from freelancers within minutes after publication!
A 3D model of an RC fishing boat (bait boat) needs to be made for 3D printing.
22 USD Client's review of cooperation with Vitalii Sobechko
A 3D model of an RC fishing boat (bait boat) needs to be made for 3D printing.Quality
Professionalism
Cost
Contactability
Deadlines
The project is very well done. To be honest, the result exceeded expectations — I didn't even expect that he could implement everything so well. It is clear that the person approached the work not formally: he showed initiative, offered his solutions, thought through the details, and tried to do it as well as possible. Many aspects were executed better than initially planned. Overall, it is evident that the work was done with attention and interest in the project.
Freelancer's review of cooperation with Rostislav Gafinets
A 3D model of an RC fishing boat (bait boat) needs to be made for 3D printing.Payment
Task setting
Clarity of requirements
Contactability
An interesting task, I had not done anything similar before, the client was specific and communicative, so we completed it in less than 1 day and ahead of schedule. The impression is positive, I recommend.
-
20 days446 USD
20 days446 USD
No problem. Not the first time. But a lot of questions will arise.
Similar completed project: Моделювання під 3д друк
-
4 days67 USD
376 1 0 4 days67 USD
Good day) ready to discuss and start working on the task ...
-
Winning proposal4 days22 USD
592 7 0 Winning proposal4 days22 USD
Good day, I have experience in modeling with electronics, since there are no specifics, the deadline will depend on the client's involvement.
-
4 days89 USD
1872 116 0 1 4 days89 USD
Hello! I can complete your order.
Examples of work
Google Drive
-
4 days45 USD
282 4 days45 USD
Hello, Rostislav!
I am interested in your project, I have experience in modeling for 3D printing. I am ready to develop a model of your RC boat taking into account all technical requirements:
Sealing and assembly: I will design the hull in segments for the Bambu Lab printing area (256x256x256 mm), I will provide reliable connections (slots or for screws) and mounting points for seals.
Technical filling: I will design internal mounts for two motors, a battery, and servos, so that the center of gravity is correct for stability on the water.
Optimization for printing: The model will be "clean" (without holes in the mesh), with a minimal amount of necessary supports to save plastic.
…
I work in Blender. I am ready to discuss the details of the electronics layout in private messages.
-
2 days67 USD
493 4 0 2 days67 USD
Hello! Ready to discuss the details, 8 years of experience in 3D including for 3D printing.
-
4 days89 USD
3842 47 2 4 days89 USD
I create a shuttle from your sketch.
I work with Autodesk INVENTOR.
See my portfolio for examples of my work.
-
4 days89 USD
4850 92 1 4 days89 USD
Hello. I will create a model with the necessary seating places. I have experience in creating and manufacturing RC model boats.
Google Drive
Google Drive
Google Drive
Google Drive
1 proposal concealed
-
Як пише Олег: "Але виникне купа питань." 😁
Тому спитаю для загалу...
Саме завдання більш схоже на висловлення особистої забаганки...
Якщо так подобається ота модель човника, то що заважає просто її купити?
Якщо якийсь параметр чи щось інше не влаштовує - то що саме?
Якщо є бажання використати куплений 3Д принтер, то вчиться його завантажувати своїми розробками і не за якісь там 20 баксів...
-
Потрібно передбачити місце у корпусі під які два двигуни(Характеристики,габарити)?Під які елементи живлення?Під яку електроніку?І Також у полі «бюджет» є явно якась помилка.
-
Current freelance projects in the category 3D Modeling
Photorealistic render of a model from Archicad in D5 RenderPhotorealistic render of the model from Archicad in D5 Render. This render needs to be refined to a photorealistic photo. Add the necessary surroundings on the site, furniture inside. Whatever is needed.It is mandatory to do this in D5 Render, so that it can be adjusted… 3D Modeling ∙ 3 hours 10 minutes back ∙ 4 proposals |
Backpack design*Backpack design: visualization and 3D model** Looking for a product designer or industrial designer with experience in accessories, bags, or gear. **What needs to be done:** — Develop the appearance of the backpack based on my references and wishes — Prepare high-quality… 3D Modeling, AI Art ∙ 1 day 16 hours back ∙ 7 proposals |
Designing parts (pads for a bag for 3D printing)
22 USD
A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 2 days back ∙ 11 proposals |
Visualization of a chair
45 USD
There is a 3D model of a chair. Changes need to be made to the backrest and the fabric on the seat needs to be replaced. It should be made as similar as possible to the photo. I am attaching the photo. I will provide more detailed specifications with links to the fabric textures… 3D Modeling ∙ 3 days 2 hours back ∙ 48 proposals |
3D model of a "banana" bag with a die-cut handleTask: 3D model of a "banana" bag with a die-cut handle (for interactive mockup)1. Purpose A parametric 3D model of a polyethylene "banana" bag with a die-cut handle. The model will be used in a web viewer (Three.js / glTF) for an interactive mockup: the client's print layout is… 3D Modeling ∙ 3 days 2 hours back ∙ 3 proposals |
Brooklyn