Budget: 27000 UAH Deadline: 90 days
The project you have is serious. It requires attention, experience, and an understanding of the level of responsibility. Your project should consist of Section AR - architectural solutions (plans, sections, facades, specifications, etc. for understanding what you are building); Section KR - structural solutions - foundations, walls, floors, partitions, stairs, roofs + main nodes (this is for understanding what and how you will build + understanding the cost of major construction and installation works and materials). Next, Engineering networks, that is, water supply, heating, and electricity - a crucial point affecting the cost and internal design, as everything here - water, sewage, ventilation, air conditioning, electricity - is the second most important section after KR since it is quite financially intensive. And of course, the General plan with fences, paths, small architectural forms, terrain, etc. Everything is quite serious, and how you approach the development of the project will determine the accuracy of the budget and construction timelines. If you are ready, I can offer you my services in designing all sections except for electricity. The price will start from $30 per square meter. The project will be completed in the engineering software complex AutoCad.
Budget: 27000 UAH Deadline: 30 days
Good day
I will develop working documentation for the house, and if necessary, I will make changes to the layout and facade part.
Experience in design for more than 15 years.
I also design interiors, so the layout will not be disconnected from functionality, as is often the case.
Budget: 27000 UAH Deadline: 45 days
Architectural section-working project
GP scheme
AR, GP-27 000 UAH
Structural solutions-45 000 UAH
Budget: 25000 UAH Deadline: 90 days
Hello!
I am ready to create interior and facade visualizations. To start the work, I need exact measurements from you.
I create furniture plans, underfloor heating, electrical and plumbing plans for the interior, as well as photorealistic visualizations.
The cost of drawings is $4/m²,
visualizations are $6/m².
I look forward to our collaboration!
Budget: 9999 UAH Deadline: 9 days
Good day, I can help you, please scroll through the examples of projects in my profile.
Budget: 25000 UAH Deadline: 20 days
Good day, I will perform the EP and GP according to the wishes. The cost is 100 square meters.
Budget: 11111 UAH Deadline: 10 days
Good day!
We have been engaged in architecture for 10 years and will gladly execute your project.
We will help you obtain a construction passport and submit for a certificate of commencement of construction works.
The sketch project with visualizations is 100 UAH/m2 (execution time approximately 12 working days).
The working project (design documentation, general plan, architectural design, construction design, partially networks) is 290 UAH/m2 of design area (execution time approximately 24 working days).
Budget: 27000 UAH Deadline: 18 days
Good evening, Evgeny. I can create an architectural project, a design project, and landscape design for you. Experience of 15+ years, certified architect. Project examples Behance
Budget: 27000 UAH Deadline: 45 days
Good day, I carry out design and architectural projects for residential buildings, I am ready to take on your project and will provide examples of our work.
- Projects 6
- Rating 5.0
- Rating 1 506
Budget: 20000 UAH Deadline: 15 days
Good day!
I am interested in your project and I am ready to take on its execution. I specialize in creating CG content of various types: from video editing and motion design (using 2D/3D graphics and animations) to architectural visualization, - I am happy to help.
And this is work I am proud of (panoramic visualization of a two-story cottage in European style): Behance
- Projects -
- Rating -
- Rating 372
Budget: 3750 UAH Deadline: 12 days
Good evening, Yevhen, I usually do not visit this site often. I am engaged in the design of residential buildings. My portfolio: https://www.woodesignstudio.co.ua
Budget: 1000 UAH Deadline: 45 days
Good day.
The cost of developing such a project is 400 UAH/m2.
Portfolio: Google Drive
Budget: 18000 UAH Deadline: 21 days
Hello! I am ready to develop the sections of AR (architecture) and GP (master plan) for you. I have five years of experience in architectural design.
The project will include:
GP:
1. Master plan diagram with the location of buildings and structures
2. Vertical planning
3. Tree plan
4. Paving and road surface plan
5. Plan for small architectural forms.
* The feasibility of combining several drawings will be discussed separately
AR:
1. Floor plans with furniture layout
2. Roof plan
3. Facades
4. Section of the building through the stairwell
5. Masonry plans
6. Marking plans
7. Statement of masonry volumes
8. Information on filling window and door openings
9. Floor explication
10. Statement of room finishes (if necessary)
11. Roof explication
12. Statement of facade finishes
13. Other specifications as needed
14. Detailed drawing of stairs.
15. Drawings of necessary nodes.
16. 3D documents or simple visualizations (2 frames)
I am also ready to offer my services for creating photorealistic visualizations or interior design project.
Portfolio link: Google Drive
Budget: 19000 UAH Deadline: 9 days
Good day.
I will do the work quickly and efficiently.
Extensive practical experience.
I am engaged in Architectural, Construction projects, developing concepts of varying complexity, 3D modeling, 3D visualization, 3D video animation, project presentation, interior and exterior design, video editing, working with AI, as well as product design, developing furniture prototypes (designed and produced for an exhibition in Canada, after which they were launched into mass production), industrial design for mass production (a street lamp designed was installed in large quantities in various cities in different countries), product listing. Excellent knowledge of ergonomics, regulatory framework in the field of construction design. Extensive practical experience. Creative approach to work. I work in programs 3ds Max + V-Ray + Corona, SketchUp + V-Ray, AutoCAD, Revit, Photoshop, Lumion, After Effects, Archicad. My portfolio https://3ddomkiev.wixsite.com/website-2
Budget: 27000 UAH Deadline: 51 days
Good day!
I am ready to help you, the work will be completed on time and with quality, with all your edits.
I have extensive experience in visualization and design.
The portfolio is in the profile.
I look forward to collaborating :)
Budget: 27000 UAH Deadline: 20 days
Hello. I will professionally develop a house project. Certified practicing architect.
Budget: 1000 UAH Deadline: 60 days
Good day!
I am ready to complete the full design project of the house with all visualizations and a complete set of drawings and specifications. During the work process, I will definitely take into account all your wishes and requirements.
I will be happy to collaborate!
Feel free to contact me, and I will send examples of completed projects.
Budget: 14444 UAH Deadline: 7 days
I will be happy to help you.
I will provide an exact price after clarifying the details of the technical task.
Example of a completed project: https://fex.net/ru/s/eovlpvo
Nataliia Burdeina
Winning proposal- Projects 15
- Rating 4.9
- Rating 4 422
Budget: 20000 UAH Deadline: 10 days
Hello, Evgeny! A certified architect with over 20 years of experience in the field of architecture and construction offers his services for the development of the architectural part of the project for your house and the design of the landscape and improvement of the adjacent territory. I carry out all stages of designing Section AR (Architecture): from (Sketch of construction intentions) to working drawings, as well as Section of the General Plan, landscape design, and improvement.
Within the framework of the assigned project, I will perform:
- architectural plans, sections, and facades;
- exterior design and Facade finishing passports;
- photorealistic 3D visualizations in daytime and nighttime with architectural lighting.
Improvement of the yard area:
- General plan with planting on the site of the house and all planned objects: pool, fountain, parking, recreation areas, and landscaping, etc.;
- Lighting of the area with the selection of lighting fixtures.
I will prepare a final presentation in PDF (renders + drawings + materials).
I have two higher education degrees: VDTU - PCB - Master of Construction (engineer-designer), KNUBA - Architecture of buildings and structures - Master of Architecture (architect).
Two higher education degrees in the field of construction and architecture, as well as extensive experience in implementing construction projects, allow me to assess and consider all aspects of designing the future object even at the stage of data collection.
I work quickly and responsibly regarding the accepted conditions and deadlines for completing the work.
Portfolio: Behance
Behance
Behance
- Projects -
- Rating -
- Rating 334
Budget: 20000 UAH Deadline: 15 days
Good day. I am ready to take on the execution of this project. I can send an example of my work. The price and time are indicated approximately.
Budget: 13000 UAH Deadline: 13 days
Good day! I will carry out this project taking into account all wishes! There are examples of similar projects that I have completed. With further submission for obtaining a construction permit! We can discuss the details!)
Budget: 15000 UAH Deadline: 14 days
Good day. I am ready to complete your task. I will develop a complete architectural and construction project. Including realistic visualizations and all necessary drawings for implementation. Feel free to contact me, we will discuss all the details of the project. Freelancehunt
Proposals concealed
Proposals are currently absent
Proposals concealed
-
Nikolay Gnilyuh 21 December 2025Ви інвестор-замовник чи підрядна будівельна організація ? Запитую томущо правилами сервісу заборонено посередництво .
Звертаюся до всіх інвесторів-замовників проектування і будівництва -- не замовляйте проектування будинку в будівельних фірмах . Не погоджуйтеся на "безкоштовні" проекти від будівельних фірм . Ви отримаєте кота в мішку . Під виглядом "безкоштовного проекту" вам будуть будувати неякісний дешевий аварійний будинок . Ви марно витратите свої гроші .
Жодна , підкреслюю ЖОДНА будівельна фірма не має в своєму штаті достатньо кваліфікованого архітектора . Тому що архітектор не може працювати під керівництвом бригадира за зарплату , коли тобі кажуть що цього місяця ти отримаєш зарплату 20 тисяч гривень . Тоді коли будівельник-муляр третього розряду отримує в місяць більше 30 тисяч гривень . І коли бригадир в куфайці тобі розповідає як має виглядати будинок , а якщо не подобається то двері он там .
Вартість "безкоштовного" проекту буде включено у вартість будівельних робіт і цю вартість ви ніколи не дізнатеся . В архітектора вартість проекту може становити 3-5-10 % від вартості будівництва , тоді як вартість "безкоштовного" в будівельній фірмі ви ніколи не дізнаєтеся і не зможете проконтролювати .
Замовники замовляйте проекти на пряму в архітекторів які не працюють в фірмі що буде будувати будинок іяка зацікавлена в збільшенні обєміс робіт і в здешевленні собівартості .
-
Nikolay Gnilyuh 21 December 2025Замовник пане Євген тут на сацйті в цій рубриці є дуже багато замовників які повторюють одну і ту ж саму помилку - вони вивішують проект будинку за 5
тисяч гривень або за 10 тисяч гривень або за 27 тисяч гривень . І результат завжди однаковий . Або замовник зявляєтьс в друге . в третє щоб йому за 1 тисячу гривень доробили проект томущо стрьомно і навіть безграмотний замовник розуміє що діло погане . Або результат буде ось такий - "Проект не виконано . Я самостійно продовжив термін, але все одно робота не зроблена.
Обіцянка вийти на зв'язок залишилась лише обіцянкою. Ні зразків, ні ескізів. Нічого..." .
Замовник як ви думаєте , це вина ваша якщо результат буде таким ? Або "не може бути щоб винним був замовник , це точно фрілансер винен , нічого було погоджуватися робити проект за 10 тисяч гривень а потім за ним ще потрібно доробляти " ?.
Хто винен якщо результат завжди однаковий - незавершений проект ?
Замовник я вам пишу що проекту будинку за 10 тис. і навіть за 27 тисяч гривень в природі не існує . Тепер ви не змажете сказати що вас не попереджали . І якщо результат буде "Проект не виконано ..." то це не буде для вас несподіванкою .
Але в мене є ще одна версія - замовникам якийсь незнайомець розповідає що все буде добре , розживешся пропектом за 27 тисяч гривень , а якщо пощастить то взагалі безкоштовно . І замовники ведуться . томущо людська жадібність і тупість - це нездоланна сила проти якої логіка не справляється .
Current freelance projects in the category Architectural Design
A model of a house needs to be placed on the plot and the real dimensions of the plot should be tied to the plan. The results with AI are not good. An example is in the photo. A rough version is needed, but as close to the original as possible.
Looking for a systems engineer / DevOps / server hardware specialist to conduct profiling (resource consumption analysis) of a script on BAS and calculate the optimal PC configuration for 24/7 operation. What needs to be done: Analyze resource consumption of the script: Run the provided BAS script in different modes (for example, 1, 5, 10, 20 threads). Conduct profiling of actual consumption: CPU (Single-core / Multi-core), RAM (memory leak dynamics over a long distance), disk (IOPS / read-write), GPU / iGPU (check if there is a load on the graphics). Identify "bottlenecks" and calculate the exact resource consumption coefficient per thread. Calculate the necessary power: Provide an accurate hardware calculation for our target number of threads (for example, 50, 80, 100, 150). Provide configuration recommendations: what processor is needed (Consumer or server Xeon/EPYC), RAM size and frequency, SSD requirements (NVMe IOPS), motherboard (VRM for 24/7), and cooling. Prepare a specification for purchasing a PC: Compile a ready-made budget specification of specific components. Requirements for the performer: Understanding the specifics of Browser Automation Studio or browser automation tools (Puppeteer / Selenium / Playwright). Experience in conducting benchmarks and load testing (Stress-testing / Profiling). Deep understanding of modern hardware (DDR4 vs DDR5, PCIe lanes, VRM, server vs desktop hardware).
Children's interactive space
I am looking for a designer to develop a partial design project (functional layout of the space, design, visualization, furniture selection) for a children's area with a large sandbox. It is necessary to create a modern, stylish, and functional interior with proper zoning. The project is funded by a grant within a veterans' initiative, so the budget for design is limited. If you are interested in participating, please send your portfolio, estimated cost of work, and timelines for completion.
Need a teacher with experience in online teaching who will demonstrate the use of AutoCAD from scratch to a group of students online. (Preferably - experience in the architectural field) Topics: Introduction to AutoCAD Basic drawing tools Editing drawings Layers and object properties Hatching and formatting Text and tables Dimensions Blocks and attributes External references and drawing organization Preparing drawings for printing Practical work Final project Conditions: 700 UAH/hour. Online, on weekdays, evening time from 18:00
Quantity Surveyor needed for detailed analysis of a construction project We are looking for a specialist to thoroughly analyze the project documentation of a construction site and prepare a detailed list of all materials, volumes, and types of work.Main Task Based on the project documentation, a complete quantity take-off of the project must be performed, and a transparent table of all construction materials and volumes must be prepared. The initial data may include: architectural drawings — AR; structural drawings — KJ / KM; specifications; PDF; DWG; Excel files; if available — BIM/Revit model. We need not just a general construction estimate, but a maximum detailed Quantity Take-Off and Material Breakdown.What needs to be done 1. Complete Quantity Take-Off Calculate the actual volumes according to the project: concrete by grades and structural elements; reinforcement broken down by diameters; metal structures; formwork; blocks and bricks; cement; sand; gravel; plaster; floor screed; waterproofing; roofing materials; facade materials; tiles and stone; ceiling materials; door and window structures; glass; wood; paint; fasteners; consumables; other materials present in the project. The list should be formed as detailed as possible, without combining different materials into general positions. For example: Reinforcement Ø8 — kg Reinforcement Ø10 — kg Reinforcement Ø12 — kg Reinforcement Ø16 — kg Concrete B25 — m³ Concrete B30 — m³ AAC Block 100 mm — m² / pcs. AAC Block 150 mm — m² / pcs. 2. Breakdown by project sections All volumes must be structured at least by the following categories: Foundation; Structural Frame; Slabs; Walls; Roofing; Facade; Flooring; Ceilings; Doors & Windows; Waterproofing; Finishing Works; External Works; other project sections. It is also desirable to separate materials by floors, buildings, villas, blocks, or zones of the site, if the project structure allows. 3. Material Breakdown A separate table of all materials needs to be prepared in the format:SectionMaterialSpecificationUnitQuantity The goal is to obtain a complete list of materials required for the construction of the site, with actual quantities. 4. BOQ — Bill of Quantities A structured BOQ needs to be prepared separately:SectionWork ItemMaterialUnitQuantity If possible, also separate: Materials; Labor; Machinery / Equipment; Transport; Waste Allowance. The main task is to ensure the ability to see the net cost of materials separately from the contractor's work cost. 5. Excel model The final work must be provided in Excel. Desired format:CodeBuildingFloorSectionMaterialSpecificationUnitDesign QuantityWaste %Purchase QuantityUnit PriceTotal Cost Additional Task It would be an advantage if the specialist can create a template system for future projects. Our goal is to use a unified structure Cost Database for analyzing different construction sites in the future. We want to be able to compare: concrete, kg of reinforcement, and materials per 1 m² of construction; cost of structures per 1 m²; materials for one room; materials for one villa; cost of individual construction elements; planned volumes against actual purchases; potential material overruns. Requirements for the Specialist We are looking for a person with practical experience: reading architectural and structural drawings; working with AR, KJ, and KM; Quantity Take-Off; BOQ; construction estimates; analysis of construction volumes; Excel. Important We do not need just a rough estimate of the total project cost. We need a specialist who can break down the project to the level of individual physical materials and quantities. The main result of the work: A complete and verifiable list of all construction materials and volumes of the site that can be used for procurement, tenders, cost control, and checking for overruns. When responding, please indicate: Your experience working with AR, KJ, and KM. Examples of completed BOQs or Quantity Take-Offs. Which programs you work with. Can you work with PDF, DWG, and Revit. How you verify the accuracy of calculations. What format of source files you need. Your cost for the project or cost per m². (Project 1000m²)